• 광물과 암석
• /
• 제33권4호
• /
• pp.439-450
• /
• 2020

온실가스의 대기 방출에 기인된 지구온난화는 범세계적인 주요 문제로 다루어지고 있으며, 이에 대한 많은 대책 중의 하나로 광물탄산화가 관심을 받고 있다. 본 연구에서는 다양한 조건에서 경량 기포콘크리트를 이용한 광물탄산화 실험을 수행하여 이들의 탄산화 재료로써의 가능성을 파악코자 하였다. 경량 기포콘크리트는 광물탄산화의 주요성분인 CaO의 함량이 약 27 wt.%에 달하여 탄산화를 위한 유망한 재료로 간주할 수 있다. 이 함량 모두가 광물탄산화에 참여한다는 가정 하에 계산된 CaCO3 함량은 약 40 wt.%이다. 경량 기포콘크리트로부터 광물탄산화 반응의 최적 조건은 단일상의 방해석이 형성된 고액비 0.01, 반응시간 180분이며, 그리고 단일상 여부와 무관하게 즉 방해석과 바테라이트가 공존하는 경우, 고액비 0.06, 반응시간 180분인 것으로 확인된다. 고액비 0.06이상인 경우, 방해석과 더불어 바테라이트가 공존하였으며, 이는 광물탄산화에 따라 초기에 형성된 바테라이트가 점차 방해석으로 상전이 된 데 반하여 후기에 형성된 바테라이트는 반응 종료 시까지 방해석으로 상전이 되지 못한데 원인이 있는 것으로 해석된다.

• 콘크리트학회지
• /
• 제9권2호
• /
• pp.137-144
• /
• 1997

발수제의 유무와 알루미늄분말의 분말도 및 첨가량을 조절하여 비중을 0.4에서 0.7로 변화시켜 비중과 ALC의 기초물성, 내동해성 및 내구성과의 관계를 조사하였다. 압축 및 인장강도는 비중이 0.4에서 0.7로 증가함에 따라 발수제의 첨가량에 관계없이 증가하였고 발수제의 첨가량이 증가하면 내동해성은 개선되었으며 흡수율은 감소하였다. 입경이 작은 AI분말을 이용항 제조한 ALC의 박리에 의한 체적감소율은 낮게 나타났으며 일면동결지속시험 및 기중동결수중융해시험에서도 내동해성이 우수한 것으로 나타났다.

• 환경위생공학
• /
• 제16권1호
• /
• pp.102-107
• /
• 2001

This research was carried out investigate the removed T-P, T-N and anion surfactants using Autoclaved Lightweight Concrete(ALC) in wastewater treatment system. Effects of pH, TDS on aqueous solution was measured. Specific area which measured by BET was $27.66m^2/g$. The phosphorous, nitrogen and anion surfactants removal efficiencies were examined by using artificial waste water(T-P : 66~73mg/L, T-N : 56~136mg/L and anion surfactants : 10~31mg/L). The results showed that the ALC was effective material as a adsorbent due to the structure and porosity. It was found that anion surfactants removed was 85~95%, phosphate removed was 92% and nitrogen removed was 90% in artificial wastewater. Agitation process was more effective than aeration process in that case of nitrogen removal system using ALC.

• 한국디지털건축인테리어학회논문집
• /
• 제11권3호
• /
• pp.35-42
• /
• 2011

The exterior system of buildings, which is the typical curtain wall, has been made with glass and metal. Theses materials, however, have weaknesses such as inadequate insulating quality, short durability, combustibility and toxic substance. On the other hand, Autoclaved Aerated Concrete(AAC) or Autoclaved Lightweight Concrete(ALC) possess the great energy efficiency and the superb insulating quality as substitute of existing exterior system materials. In this research, strength characteristics and bubble dispersion of hydrothermal synthesis process of AAC based on CaO/$SiO_2$(C/S) ratio are analyzed. C/S ratio is determinated and bubble distribution and compressive strength are studied through the test of varied water-to-solid mineral ratio(W/S). In hydrothermal synthesis program, final C/S ratio is determined as 0.7 consider of the manufacturing process and hydrothermal synthesis is done at $180^{\circ}C$ for 7 hours. The analysis shows slurry has about 2,300cP viscosity and 0.56 specific gravity therefore it is expected AAC has the appropriate facility in the manufacturing process and Hydrates of AAC's Expansion.

• 제어로봇시스템학회논문지
• /
• 제9권6호
• /
• pp.448-455
• /
• 2003

A system design technique of automatic thickness measurement and defect inspection system, which measures the thickness of the ALC(Autoclaved Lightweight Concrete) block and inspects the defect on a realtime basis is proposed. The image processing system was established with a CCD camera, an image grabber, and a personal computer without using assembled measurement equipment. The image obtained by this system was analyzed by a devised algorithm, specially designed for the enhanced measurement accuracy. For the realization of the proposed algorithm, the preprocessing method that can be applied to overcome uneven lighting environment, an enhanced edge decision method using 8 edge-pairs with irregular and rough surface, the unit length decision method in uneven condition with rocking objects, and the curvature calibration method of camera using a constructed grid are developed. The experimental results, show that the required measurement accuracy specification is sufficiently satisfied using our proposed method.

• 한국건설순환자원학회논문집
• /
• 제1권3호
• /
• pp.219-224
• /
• 2013

본 연구에서는 규석, 시멘트, 생석회 및 소량의 무수석고를 사용하여 미네랄 하이드레이트 단열소재를 제조하였다. 슬러리의 특성 분석을 선행한 후, $CaO/SiO_2$ 몰비 변화에 따른 배합설계를 통해 최적 배합비를 도출하였다. 도출된 배합 설계비를 기준으로 혼합수 함량 및 수열합성 조건에 따른 소재의 특성을 측정, 평가하였다. 초적 조건으로 제조된 미네랄 하이드레이트 소재의 특성은 각각 밀도 $0.26g/cm^3$, 압축강도 0.4MPa, 열전도율 0.064W/mK로 나타났다. 이는 기존의 ALC(Autoclaved Lightweight Concrete) 소재의 성능을 한층 개선한 결과로서, 향후 지속적인 열적특성 개선 연구를 수행하여 유기 및 무기 단열재를 대체하여 새로운 개념의 무기계 단열재로 사용 가능할 것이라 판단된다.

• 대한건축학회논문집:구조계
• /
• 제34권1호
• /
• pp.79-87
• /
• 2018

The purpose of this study was to analyze factors influencing insulation performance of inorganic Autoclaved Lightweight Concrete(ALC) sandwich wall panels with the application of shear connectors. To analyze the effect of shear connectors on the thermal performance of sandwich wall panels, heat transfer analysis was conducted by using the three-dimensional heat transfer simulation software. Four types of shear connector such as Pin, Clip, Grid, and Truss were selected for insulation performance analysis. Thermal bridge coefficient was calculated by varying typical panel thickness and shear connector thickness and materials such as steel, aluminum, and stainless steel. The results showed that Grid and Truss type widely distributed along the section of sandwich wall panel had a great influence on the thermal bridge coefficient by changing the influence factors. Based on the results of thermal and structural performance analysis, effective heat transmission coefficient of the sandwich wall panel satisfying the passive house insulation criteria was calculated. As a result, it was found that heat transmission coefficient was increased from $0.132W/m^2{\cdot}K$ to $0.141{\sim}0.306W/m^2{\cdot}K$ depending on the shear connector types and materials. In the majority of cases, the passive house insulation criteria was not satisfied after using shear connectors. The results of this study were likely to vary according to how influence factors were set, but it is important to apply the methods that reduce the thermal bridge when there would be a possibility of greatly affecting the insulation performance.

• 한국세라믹학회지
• /
• 제46권3호
• /
• pp.275-281
• /
• 2009

Porous materials were manufactured by hydrothermal treatment of waste bottle glass without foam agent. Factorial design was applied to analyze data by statistical methods and deal with the important factors for a process. The largest effect for porosity was for temperature of hydrothermal treatment. Amount of water and temperature-water interaction appeared to have little effect. The particle size of raw material was also identified as a major factor by one-way ANOVA and the porosity decreased as the size increased. The sintering temperature was not statistically significant for the porosity but was significant for the pore size. The porous material had compressive strength and thermal conductivity comparing with those of ALC (autoclaved lightweight concrete), although it has higher porosity than for ALC.

• 한국축산시설환경학회지
• /
• 제5권3호
• /
• pp.175-180
• /
• 1999

This study was carried out to improve septic tank for piggery wastewater treatment of small pig farm. Septic tank were consisted of screen tank, aeration tank with two steps, settling tank, and filtering tank. Aeration tanks were filled with ALC of ø4~5cm. All operation steps were performed by timer from influent to effluent. Septic tank decreased BOD by 94.7% from 4,298.3mg/$\ell$ to 226.3mg/$\ell$ and also decreased SS by 92.4%, from 2,231.3mg/$\ell$ to 161.0mg/$\ell$, respectively.

• 한국디지털건축인테리어학회논문집
• /
• 제13권4호
• /
• pp.25-32
• /
• 2013

The green building is one of biggest factors to go the goal of energy saving and environmental conservation, reduction of energy consumption, friendly energy technology, recycling of resource, and environmental pollution reduction technology. The purpose of these green buildings realized by the energy-saving technology such as the exterior materials or curtain wall system. The curtain wall system is a element that come to insulated portions of building envelope that results in heat loss. The purpose of this paper is to carried out mock-up tests for exterior wall used in autoclaved lightweight concrete panels in green building practices. Mock-up test execute a mixed process between standard test procedure and complex test procedure based on AAMA 501(American Society for Testing and Materials) and ASTM 283, ASTM 330(American Society for Testing and Materials). In results, tests meet the requirements that grant values in steps of procedures provided on ASTM and AAMA. ALC panel is suitable for a exterior wall product to be gratified thermal cycling performance and structural capacity, deflection(H/200) and lateral displacement(H/50), for curtain walls.