• The Journal of the Acoustical Society of Korea
• /
• v.23 no.1
• /
• pp.54-60
• /
• 2004

In order to mitigate the problems in storage space and network bandwidth for the full CD quality audio, current digital audio is always restricted by sampling rate and bandwidth. This restriction normally results in low sample rate audio or calls for the data compression scheme such as MP3. However, they can only reproduce a lower frequency range than a regular CD quality because of the Nyquist sampling theory. Consequently they lose rich spatial information embedded in high frequency. The propose of this paper is to propose efficient high frequency enhancement of low sample rate audio using n adaptive filtering and DWT analysis and synthesis. The proposed algorithm uses the LMS adaptive algorithm to estimate the missing high frequency contents in DWT domain and it then reconstructs the spectrally enhanced audio by using the DWT synthesis procedure. Several experiments with real speech and audio are performed and compared with other algorithm. From the experimental results of spectrogram and sonic test, we confirm that the proposed algorithm outperforms the other algorithm and reasonably works well for the most of audio cases.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.1
• /
• pp.70-75
• /
• 2007

In order to mitigate the problems in storage space and network bandwidth for the full CD quality audio with 44.1 kHz sampling rate, current existing digital audio is always restricted by sampling rate and bandwidth. This kind of restriction normally can be resolved by using low bit rate audio codec such as MP3, OGG, and AAC. However it suffers a major problem such as a loss of high frequency fidelity. This high frequency loss will reproduce only the band-limited low-frequency part of audio in the standard CD-quality audio. In general, the high frequency contents of audio have lots of information such as localization and ambient information, and bright nature of audio. The purpose of this paper is to implement on ARM platform system that can effectively estimate and compensate the missing high frequency contents of MP3 audio. From the experimental results with spectrum analysis and listening test, we confirm the superiority of the proposed algorithms for MP3 audio quality enhancement.

• Journal of Broadcast Engineering
• /
• v.8 no.1
• /
• pp.11-18
• /
• 2003

In this paper, we introduce a novel signal quality enhancement algorithm with a perceptual interference analysis and perceptual convolutional noise suppression. A perceptual convolutional noise is reflected in the audible disturbance that can still be recognized after the additional noise suppression and tonality change which is caused by the noise energy excitation. The enhancement system is organized with a perceptual additional noise suppression part and a perceptual convolutional noise suppression part. Experimental results show that these two parts have an equivalent quality enhancement performance.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1997.11a
• /
• pp.63-67
• /
• 1997

The ISO(International Standard Organization) has standardized MPEG-2 audio. The MPEG-2 audio compression algorithm is based upon subband analysis and exploits the human auditory characteristics to achieve a low bit rate with minimum perceptual loss of audio signal quality. This thesis presents an enhanced MPEG-2 audio encoder using multiple TMS320C30 general purpose DSP's. The developed system is made up of five slave boards and one master board. Each slave board performs susband analysis psychoacoustic parameter calculation for one channel, and the master board manages bit allocation, quantization, and bit-stream formatting for all channels. Parallel processing and pipelining techniques are used in hardware structure and fast algorithms are applied in each subroutine to implement a real-time process. The implemented system supports multichannel up to 5.1 and various bitrates.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.5 no.4
• /
• pp.249-254
• /
• 2005

This paper presents a system-on-a-chip (SOC) design for digital TV. The single LSI incorporates almost all essential parts such as CPU, ISO/IEC 11172/13818 system/audio/video decoders, a video post-processor, a graphics/OSD processor and a display processor. It has analog IP's inside such as video DACs, an audio PLL, and a system PLL to reduce the system-level implementation cost. Descramblers and Smart Card interface are included to support widely used conditional access systems. The video decoder can decode two video streams simultaneously. The DSP-based audio decoder can process various audio coding specifications. The functional blocks for video quality enhancement also form outstanding features of this SoC. The SoC supports world-wide major DTV services including ATSC, ARIB, DVB, and DIRECTV.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.241-242
• /
• 2006

MPEG Surround is an audio coding technology that represents multi-channel audio signal with downmixed audio signal(s) and very low bitrate side information based on Binaural Cue Coding. The side information consists of Inter-Channel Level Difference, Inter-Channel Correlation, and payloads. These two parameters are correspondent to the well-known spatial parameters in psycho-acoustics, Inter-aural Level Difference (ILD) and Inter-Aural Cross Correlation (IACC). Though ICLD is to provide perceptually equivalent ILD to the listener, however, the ILD of the original multi-channel audio signal and that of the MPEG Surround encoded signal was different. The difference between two ILD values is defined as ILD Distortion (ILDD). This paper provides how ILDD can be applied to enhance sound quality in MPEG Surround and how much ILDD is decreased.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.8
• /
• pp.108-115
• /
• 1999

In this study we suggested a digital filter method to enhance car audio sound quality against the sound distortion due to cabin's acoustic characteristics and car driving noises. The digital filters designed were based on the characteristics on car driving noises and cabin acoustic characteristics. Car driving noises were analyzed by two ways; one is an objective method, octave band frequency analysis method. The other is a subjective method; sensory evaluation method, NCB method. On these results, seven sets of modified coefficients of eleven band digital filters were obtained. To find optimum audio sound quality among nine sound samples filtered by designing seven types of digital filters, which were mixed car driving noises at 100km/h, subjective evaluation method was used, paired comparison method; Scheffe' seven point method.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.1
• /
• pp.43-51
• /
• 2005

In this paper, we propose an algorithm that improves a tone quality of a noisy audio signal in order to enhance a Performance of perceptual filter using noise energy control. Most of the algorithms which were proposed by the other researchers usually applied a filter using the noise energy acquired from a silent range. In this case. the improvement rate of tone quality decreases if the noise energy is changed by the magnitude or environment variation in a signal frame. But the Proposed method Provides the means to find a food estimated noise through energy control of the estimated noise which is obtained from a silent range. Also we can get the enhancement of tone qualify in low frequency band unlike other methods. To show the performance of the Proposed algorithm, various input signals which had a different signal-to-noise ratio (SNR) such as 5dB, l0dB, 15dB and 20dB were used to test the proposed algorithm. With the proposed algorithm, we could confirm the enhancement of tone quality in terms of segmental SNR (SSNR). noise-to-mask ration (NMR) and mean opinion score (MOS) test.

• Journal of Korea Multimedia Society
• /
• v.10 no.8
• /
• pp.958-966
• /
• 2007

In this paper, we implement a sound-enhanced MPEG-1 audio decoder on embedded OS Platform. Low bit rate lossy audio codecs such as MP3, OGG, and AAC for mitigating the problems in storage space and network bandwidth suffer a major common problem such as a loss of high frequency fidelity of audio signal. This high frequency loss will reproduce only a band-limited low-frequency part of audio in the standard CD-quality audio. In order to overcome this problem, we embedded a sound enhancement algorithm into the MPEG-1 audio decoder and then the algorithms optimized according to the characteristic of the MPEG-1 audio layer I, II, III were implemented on an embedded OS platform. From the experimental results with spectrum analysis and listening test, we confirm the superiority of the proposed system compared to the standard MPEG-1 audio decoder.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.4
• /
• pp.270-277
• /
• 2010

In this paper, we proposed an algorithm that improves tone quality of noisy audio signals by using ICA(Independent Component Analysis) algorithm and perceptual filters. Many algorithms have been proposed to eliminate the noise from the audio signals, such as spectral subtraction method, perceptual filter, etc. The perceptual filter uses a noise that is acquired from silent ranges in the input signal. In this case, the improvement rate of tone quality decreases if the noise energy is changed by the environmental variation in a signal frame. But the proposed method estimates a noise that is changed at each frame using ICA algorithm. The estimated noise is applied to perceptual filter. To show the performance of the proposed algorithm, several tests are performed to various input signals. With the proposed algorithm, we could confirm the enhancement of tone quality in terms of segmental SNR (SSNR), noise-to-mask ratio (NMR) and Degradation Category Rating (DCR) test.