• International Journal of Aeronautical and Space Sciences
• /
• 제18권2호
• /
• pp.352-364
• /
• 2017

A novel 3D mathematical model for water film runback and icing on a rotating surface is established in this work, where both inertial forces caused by the rotation and shear forces due to the air flow are taken into account. The mathematical model of the water film runback and energy conservation of phase transition process is established, with a cyclical average method applied to simulate the unsteady parameters variation at angles of attack. Ice accretion on a conical spinner surface is simulated and the results are compared with the experimental data to validate the presented model. Then Ice accretion on a cowling surface is numerically investigated. Results show that a higher temperature would correspond to a larger runback ice area and thinner ice layer for glaze ice. Rotation would enhance the icing process, while it would not significantly affect the droplet collection efficiency for an axi-symmetric surface. In the case at angle of attack, the effect of rotation on ice shape is appreciable, ice would present a symmetric shape, while in a stationary case the shape is asymmetric.

• 한국지반환경공학회 논문집
• /
• 제11권1호
• /
• pp.53-59
• /
• 2010

해수 침적 조건에서 시멘트 수화물이 부식되는 화학적 열화과정은 콘크리트 구조물이나 주입공사 목적물에서 동일하다. 국내에서 사용되고 있는 MSG(Micro Silica Grouting)주입재는 실리카질 물질이 다량 함유된 혼합계 시멘트로서 분말도가 $8,000cm^2/g$ 이상으로 높기 때문에 수화활성도가 매우 크고, 고강도 및 고내구성을 특징으로 하며, $C_3A$ 함유량도 5% 이하로 내황산염시멘트 규격을 만족하는 내해수성 시멘트재로 평가된다. 따라서, 본 논문에서는 내해수성이 우수한 MSG와 국내에서 사용되고 있는 급결재를 조합하여 내해수성 특성을 실험적으로 평가하였다. 국내에서 일반적으로 규산계 고활성 급결재 또는 초속경시멘트계 무기질 급결재가 사용되고 있다. 이들 급결재와 MSG가 조합된 주입재의 호모겔 시편에 대해서 압축강도, 중량변화 및 길이변화 특성을 실험적으로 평가하여 내해수성이 우수한 주입재 조합을 제시하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.661-666
• /
• 2002

The safety and serviceability of concrete structures are influenced by corrosion of steel bars in concrete. Several methods have been available to protect the reinforcing bars from corrosion. Among them, the surface coating method is one of the easiest way to apply to concrete structures. However, the realistic guideline for surface coating materials has not been established yet in this country. In this study, in order to establish a reasonable technical guidelines, the durability of the concrete treated by coatings was evaluated.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2008년도 추계학술대회 초록집
• /
• pp.133-133
• /
• 2008

본 연구에서는 임상적으로 사용후 임플란트시스템의 안정성을 조사하기 위하여 인위적으로 풀림 조임을 1회와 20회로 반복한 후 0.9% NaCl에서 부식을 시키고 파괴한 후 임플란트시스템의 안정성에 대하여 조사하였다.

• 한국국방경영분석학회지
• /
• 제26권1호
• /
• pp.34-46
• /
• 2000

The object of this study is to construct a model for an optimal allocation of short surface to air missile defending our targets most efficiently from hostile aircraft´s attack. For the purpose of this, we analyze and establish facility allocation concept of existing models, apply set covering theory appropriate to problem´s properties, present the process of calculating the probability of target being protected, apply Sherali-Kim´s branching variable selection strategy, and then construct the model. As constructed model apply the reducing problem with application, we confirm that we can apply the large scale, real problem.

• 한국표면공학회지
• /
• 제37권2호
• /
• pp.128-136
• /
• 2004

Effects of alloying elements on the surface characteristics of Fe-38Al intermetallic compounds were investigated using potentiostat. The specimens were casted by the vacuum arc melting. The subsequent homogenization and the stabilization led to the homogeneous DO$_3$ structure of the specimen. After the corrosion tests, the surface of the tested specimen was observed by the optical microscopy and scanning electron microscopy(SEM). For Fe-38 at.% Al intermetallic compound, the addition of Cr and Mo proved to be beneficial in decreasing the grain boundary attack by decreasing the active current density. Addition of Band Nb resulted in a higher active current density and also a higher passive current density. These results indicated the role of Cr and Mo in improving the pitting corrosion resistance of Fe-38 at.%Al intermetallic compound. Band Nb addition to Fe-38 at.%Al accelerated the granular corrosion. Fe-38 at.%Al containing Cr and Mo showed remarkably improved pitting corrosion resistance in comparison with Band Nb addition to Fe-38 at. %Al.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.505-508
• /
• 2005

Concrete has a void, which exists as one of defect in concrete. If the porosity of concrete increases, durability of concrete decreases. In this paper, to improve surface void of concrete, surface penetration sealers are applied to specimen. And it were investigated that the resistances of chloride penetration and freezing and thawing for concrete with surface penetration sealer of two types. According to the results, surface penetration sealer has not show a harmful influence on strength and resistance of freezing and thawing. Also, B type surface penetration sealer was more superior in resistance of chloride penetration.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.154-159
• /
• 2004

A new finite difference scheme is studied fur the simulation of free surface, surface the third derivative tenn for the wave elevation is artificially added in the the free-surface boundary condition. This study presents a comparative analysis with simulations performed by using the classical MAC method. More systematic computations are carried out by changing the submergence depth and angle of attack. Through the numerical simulation, it is found that a new numerical method becomes more efficient for the reason that the free surface elevation is reasonably developed at tire rear of trailing edge.

• Strategy21
• /
• 통권41호
• /
• pp.52-84
• /
• 2017

After finishing Cold War, the U.S. Navy's ability to Sea control has been gradually eroded last 15-20 years. The global security environment demands that the surface Navy rededicate itself to sea control, as a new group of potential adversaries is working to deny U.S. navy command of the sea. China has been increasing their sea denial capability, such as extended anti-surface cruise missile and anti-surface ballistic missile. To cope with this situation, the U.S. Naval Surface Forces Command has announced Surface Forces Strategy: Return to Sea Control. It is a new operating and organizing concept for the U.S. surface fleet called 'distributed lethality'. Under distributed lethality, offensive weapons such as new ASCMs are to be distributed more widely across all types of Navy surface ships, and new operational concept for Navy surface fleet's capability for attacking enemy ships and make it less possible for an enemy to cripple the U.S. fleet by concentrating its attack on a few very high-value Navy surface ships. By increasing the lethality of the surface ships and distributing them across wide areas, the Navy forces potential adversaries to not only consider the threat from our carrier-based aircraft and submarines, but they now consider the threat form all of those surface ships. This idea of using the distributed lethality template to generate surface action groups and adaptive force package and to start thinking about to increase the lethal efficacy of these ships. The U.S. Navy believes distributed lethality increases the Navy's sea control capability and expands U.S. conventional deterrence. Funding new weapons and renovated operating concept to field a more lethal and distributed force will enable us to establish sea control, even in contested area. The U.S. Navy's Surface Forces Strategy provides some useful implications for The ROK Navy. First the ROK Navy need to reconsider sea control mission. securing sea control and exploiting sea control are in a close connection. However, recently the ROK Navy only focuses on exploiting sea control, for instance land attack mission. the ROK Navy is required to reinvigorate sea control mission, such as anti-surface warfare and anti-air warfare. Second, the ROK Navy must seek the way to improve its warfighting capability. It can be achieved by developing high-edge weapons and designing renewed operating concept and embraced new weapon's extended capabilities.

• 콘크리트학회논문집
• /
• 제20권3호
• /
• pp.283-290
• /
• 2008

표면 침투제를 이용한 보수기법은 열화된 콘크리트구조물에 대해서 효과적이므로, 최근들어 많은 연구가 수행되고 있다. 특히 무기계 표면 보호재를 제조할 경우나 현장에서 적용할 경우, 공기오염이 없으므로 환경친화적이며, 침투층과 구콘크리트간의 물리적 성능 차이에 의한 박리가 발생하지 않는다. 침투된 콘크리트의 내구성 평가를 위해서는 장기폭로실험에 의한 평가가 매우 중요하지만, 대부분의 내구성 실험이 일시적이고 정성적인 실내실험에 국한되어 있다. 본 연구에서는 무기계 및 유/무기계 침투제를 사용한 콘크리트 시편에 대하여 장기염해폭로실험을 수행하여 내구적 특성을 실험적으로 평가하였다. 21 MPa과 34MPa로 제조된 2가지의 콘크리트 배합에 대하여, 2년간 해수중, 조석대, 비말대에 노출하였으며, 압축강도, 염화물 침투깊이, 철근부식 자연전위 등을 평가하였다. 평가 결과, 침투제를 적용한 시편은 강도 증가에서는 성능 개선 효과가 거의 없었으나, 염화물 침투깊이와 자연전위에 대해서는 내구성능이 개선된 것으로 평가되었다. 유/무기계 침투제 보다 무기계 침투제에서 염해저항성이 크게 평가되었으며 수중부, 조석대에 노출된 시편보다는 비말대에 노출된 시편에서 염해저항성이 높게 평가되었다.