• Wind and Structures
• /
• 제24권5호
• /
• pp.447-464
• /
• 2017

The flutter instability is one of the most important themes need to be carefully investigated in the design of long-span bridges. This study takes the central-slotted ideal thin flat plate as an object, and examines the characteristics of unsteady surface pressures of stationary and vibrating cross sections based on computational fluid dynamics (CFD) simulations. The flutter derivatives are extracted from the surface pressure distribution and the critical flutter wind speed of a long span suspension bridge is then calculated. The influences of angle of attack and the slot ratio on the flutter performance of central-slotted plate are investigated. The results show that the critical flutter wind speed reduces with increase in angle of attack. At lower angles of attack where the plate shows the characteristics of a streamlined cross-section, the existence of central slot can improve the critical flutter wind speed. On the other hand, at larger angles of attack, where the plate becomes a bluff body, the existence of central slot further reduces the flutter performance.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.699-702
• /
• 2004

In this study, the affect of mounting axisymmetrical supersonic inlet to airfoil, which has 65 degree swept angle was numerically investigated. The parameter for this calculation are tree stream Mach number M=2.0 and 2.5, the distance between inlet spike and airfoil lower surface $L_{sw}$/$R_{cowl}$ = 1.21-1.54 and angle of attack to the airfoil 0-4. The mass capture ratio improved 3points in M=2.0 condition and 1points in M=2.5 while the mass capture ratio without airfoil surface was 57% and 71 % for each case. These are the result from increase of density and change of velocity deflection by the shock wave structure formed between inlet and airfoil surface. On the other hand, the distortion of Mach number at cowl lip plane increased by 13% in M=2.0, 3% in M=2.5 condition. The effects of the angle attack on the mass capture ratio is greater than that of the shock wave interaction between inlet and cowl, but the effects to the distortion is smaller in the range of this calculation condition. In the condition of M=2.0 with 4 degrees of angle of attack, inlet distortion of Mach number is mainly caused by the affects of the shock wave interaction between inlet and airfoil surface, while the largest angle of the velocity vector in the radial direction at cowl lip plane is caused by the affect of angle of attack. This large velocity vector made the flow inside the cowl subsonic and caused spillage, which interfere with the boundary layer of airfoil surface.

• EDISON SW 활용 경진대회 논문집
• /
• 제6회(2016년)
• /
• pp.19-22
• /
• 2016

Leading edge thrust is generally caused by passing air flow from lower to upper surface and it is required to have sufficient angle of attack for notable leading edge thrust. To produce leading edge thrust at low angle of attack, utilizing expansion wave accompanying low pressure is able to be a solution. Fore structure changes the direction of flow, and this flow passes the projected edge. As a result, from a perspective of the edge, it is able to have high angle of attack, and artificial expansion wave is generated. This concept shows 9.48% increase of L/D in inviscid flow, at Mach number 1.3 and angle of attack $1^{\circ}$ in maximum, and this model shows the 3.98% of increasement at angle of attack $2^{\circ}$. Although advantage of the artificial expansion wave decreased as angle of attack increase, it shows the possibility of aerodynamical improvement with artificial expansion wave.

• Journal of Mechanical Science and Technology
• /
• 제17권6호
• /
• pp.914-924
• /
• 2003

The interaction and breakdown of vortices over the Leading Edge Extension (LEX) - Delta wing configuration has been investigated through wing-surface pressure measurements, the off-surface flow visualization, and 5-hole probe measurements of the wing wake section. The description focused on analyzing the interaction and the breakdown of vortices depending on the angle of attack and the sideslip angle. The Effect of angle of attack and sideslip angle on the aerodynamic load characteristics of the model is also presented. The sideslip angle was found to be a very influential parameter of the vortex flow over the LEX-delta wing configuration. The introduction of LEX vortex stabilized the vortex flow, and delayed the vortex breakdown up to a higher angle of attack. The vortex interaction and breakdown was promoted on the windward side, whereas it was suppressed on the leeward side.

• 한국컴퓨터정보학회논문지
• /
• 제24권9호
• /
• pp.35-42
• /
• 2019

In this paper, we propose an approach to apply network-based moving target defense into Internet of Things (IoT) networks. The IoT is a technology that provides the high interconnectivity of things like electronic devices. However, cyber security risks are expected to increase as the interconnectivity of such devices increases. One recent study demonstrated a man-in-the-middle attack in the statically configured IoT network. In recent years, a new approach to cyber security, called the moving target defense, has emerged as a potential solution to the challenge of static systems. The approach continuously changes system's attack surface to prevent attacks. After analyzing IPv4 / IPv6-based moving target defense schemes and IoT network-related technologies, we present our approach in terms of addressing systems, address mutation techniques, communication models, network configuration, and node mobility. In addition, we summarize the direction of future research in relation to the proposed approach.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.414-419
• /
• 2011

Missile am fighter aircraft have been challenged by low restoring nose-down pitching moment at high angle of attach. The consequence of weak nose-down pitching moment can be resulting in a deep stall condition. Especially, the pressure oscillation has a huge effect on noise generation, structure damage, aerodynamic performance and safety, because the flow has strong unsteadiness at high angle of attack. In this paper, the unsteady aerodynamics coefficients were analyzed at high angle of attack up to 60 degrees around two dimensional NACA0012 airfoil. The two dimensional unsteady compressible Navier-Stokes equation with a LES turbulent model was calculated by OHOC (Optimized High-Order Compact) scheme. The flow conditions are Mach number of 0.3 and Reynolds number of $10^5$. The lift, drag, pressure distribution, etc. are analyzed according to the angle of attack. The results at a low angle of attack are compared with other results before a stall condition. From a certain high angle of attack, the strong vortex formed by the leading edge are flowing downstream as like Karman vortex around a circular cylinder. Unsteady velocity field, periodic vortex shedding, the unsteady pressure distribution on the airfoil surface, and the acoustic fields are analyzed. The effects of these unsteady characteristics in the aerodynamic coefficients are analyzed.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제30회 춘계학술대회논문집
• /
• pp.71-76
• /
• 2008

본 연구에서는 아음속 영역에서 유도무기의 일반적 형상인 세장형 몸체를 갖는 서로 다른 선두부 형상의 두 모델을 이용하여 받음각에 다른 세장형 모델 윗면의 압력 분포를 측정하였다. 아음속 영역에서 서로 다른 선두부 형상을 갖는 두 모델의 받음각에 따른 공력실험 결과로 특정 받음각에서의 측력 및 요잉모멘트가 최대가 되는 것을 확인하였으며 비대칭 정상상태와 비대칭 비정상상태의 경계를 알 수 있었다. 또한 시간에 따른 측력, 항력 및 요잉모멘트의 결과로 같은 받음각이라도 선두부의 형상에 따라 안정성이 다른 결과를 보였다. 받음각에 따른 세장형 몸체 표면 압력 분포를 측정한 결과 받음각이 증가할수록 표면압력 분포는 비대칭적으로 형성됨을 알 수 있었다.

• 대한기계학회논문집A
• /
• 제40권7호
• /
• pp.637-646
• /
• 2016

실온에서 인코넬 718의 UNSM(Ultrasonic nanocrystal surface modification)처리재, 수소취화재(100 bar, $300^{\circ}C$에서 120 h) 및 수소취화재의 UNSM처리재의 회전굽힘피로시험에 의해 얻어진 결과, 수소취화재는 미처리재의 S-N곡선보다 피로수명이 약 10~20 % 감소하며 부식피로나 비철재료처럼 피로한도 없이 점진적으로 감소하였다. 표면균열수는 수소취화의 영향으로 평균입경($13{\mu}m$)보다 작은 균열의 비율이 약 80 %를 차지하였다. 결정입계, 표면 흠 등에 수소침투에 의한 취화현상으로 티어링(tearing)하면서 복수로 발생한 작은 표면균열은 불규칙적으로 분포하며 티어링하면서 성장, 합체되어 피로수명이 감소하는 것으로 추정된다. 미처리재에 비해서 UNSM처리재의 피로수명은 전 영역에서 크게 증가하였고, 수소취화된 시험편을 UNSM 처리한 후 피로시험을 실시하면 700 MPa에서 10배 이상, 600 MPa에서 20배 이상 증가하였다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2004년도 유체기계 연구개발 발표회 논문집
• /
• pp.456-461
• /
• 2004

In this study, the characteristics of the cavitation behavior around hydrofoil are investigated with the commercial CFD code CFX-5. Calculations are performed for NACA 64108 hydrofoil by solving the time-averaged turbulent Navier-Stokes equations and discretized by finite volume method. We classify the different cavitating regimes in which appear at the hydrofoil according to the values of cavitation number, surface roughness and angle of attack. Special attention is paid to the following topics: cavity length, void fraction and lift breakdown.

• 한국멀티미디어학회논문지
• /
• 제19권2호
• /
• pp.280-290
• /
• 2016

In this paper, we propose a layered pattern authentication scheme resistant to social engineering attacks. Existing android pattern lock scheme has some weak points for social engineering attacks. Thus, the proposed scheme improves the existing pattern lock scheme. In our scheme, pattern is recorded by touch screen, however, it is different with existing schemes because of the layered pattern. During the pattern registration process, users register their own pattern with many layers. Thus, registered pattern is 3D shape. When the smudge attack is occurring, the attacker can see the shape of user pattern through the smudge on smartphone screen. However, it is described on 2D surface, so acquired pattern is not fully determine to users original 3D shape. Therefore, our scheme is resistant to social engineering attack, especially smudge attack.