• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2001.05b
• /
• pp.129-132
• /
• 2001

The purpose of this research was to understand possibility of foodwaste treatment by hybrid anaerobic reactor(HAR). The Possibility of methane utility and applicability of hybrid reactor system using foodwaste as substrate was investigated. The maximum loading rate and optimized operational conditions were determined. Hybrid anaerobic reactor was filled with packing material 50% of its total volume between the tube and the outer surface. The packing material used was randomly packed open-pore synthesis activated ceramic(SAC) media as support media for microbial attachment, growth, and chemical stability protected bacteria from effect of organic acid accumulation. In this research, although foodwaste has high concentrations C $l^{[-10]}$ and S $O_{4}$$^{2-}$ concentration the possibility of foodwaste anaerobic treatment was when foodwaste is treated by anaerobic digestion, this study focused on the possibility using C $H_4$ gas made under the anaerobic treatment as an alternative energy source. Other objective of this research is to study struvite formation and crystal forms in anaerobic digester. HAR is used to investigate phosphate crystallization without the addition of chemicals.

• Geotechnical Engineering
• /
• v.2 no.1
• /
• pp.45-54
• /
• 1986

An experimental study was carried out in the laboratory on a model of a reinforced earth retaining wall to provide the empirical data for the rational design and the construction methods on a reinforced earth retaining wall. Observed measurements included the variation of tension in the aluminium foil reinforcing strips was monitored by electrical resistance strain gauges pasted on its at different stages of construction. In addition, the lateral movement of the wall was measured by dial gauges and the mode of collapse of the wall was investigated. The measured values are discussed in comparison with the results of the existing studies of the reinforced earth retaining wall. A significant result of the experiments is that the variation of tension in reinforcing strips is non-linear with the maximum tension occuring close to wall face. Attachment of reinforcement to wall increases the stability against overturning.

• Journal of International Academy of Physical Therapy Research
• /
• v.10 no.2
• /
• pp.1779-1784
• /
• 2019

Background: A number of researchers have attempted to improve the balance of stroke patients, however there is still a question as to whether taping is effective in increasing balance. Objective: To determine the effect of paretic and non-paretic side taping on the balance ability in patients with stroke. Design: A single-blind randomized controlled trial Methods: This randomized single-blind controlled clinical trial with a repeated measures study included 45 subjects who were randomly assigned to paretic side taping groups (n=15), non-paretic side taping groups (n=15), and trunk exercise groups (n=15). Trunk exercise and paretic side taping groups had taping on the paralyzed erector spinae, while the non-paretic side taping group had taping on the non-paralyzed erector spinae. Trunk exercises were performed for 30 minutes to promote core muscles. The balance ability measured the center of pressure movement (paretic side, non-paretic side,forward, backward, limit of stability) in the sitting position. All measurements were evaluated using BioRescue. Results: All three groups showed significant increase in all variables after 4 weeks. The paretic and non-paretic side taping groups had a significant increase in all variables after 30 min of attachment. However, there was no significant difference among the three groups. Conclusions: Paralysis and non-paralysis taping improved the balance ability of patients with stroke in an immediate effect of 30 min. However, after 4 weeks of intervention, taping with trunk exercise did not differ from single trunk exercise. In future studies, various analyses need to be conducted through more diverse evaluations.

• Elastomers and Composites
• /
• v.54 no.1
• /
• pp.70-76
• /
• 2019

The function and purpose of the marine rubber fender, to prevent the damage of the ship and the mooring while the ship is being attached to the pier. However, maintenance of the fender after installation is not enough, because it is generally handled as an attachment facility. Estimation the life of a marine rubber fender is important in the maintenance of a port. When manufacturers design and produce marine rubber fenders, they do so according to various conditions such as the reaction force acting on the hull and docking vessel and deformation after absorbing the kinetic energy of the ship. In this study, a method for predicting and evaluating service life from the product design and development stage was established, in order to evaluate the durability of the marine rubber fenders. The SSp-300H and HSP-300H models were used to predict the service life. The method developed in this study, is expected to predict the service life of the marine rubber fender accurately and in a comparatively shorter time, thereby contributing to the evaluation standard and quality stability of the product.

• Physical Therapy Rehabilitation Science
• /
• v.11 no.2
• /
• pp.119-126
• /
• 2022

Objective: This study aimed to investigate the effect of the application of abdominal brace techniques on muscle activity of the trunk and lower extremities when walking. Design: Cross-sectional study Methods: This study was conducted on 26 healthy adults in their 20s, and the subjects performed two conditions in random order: walking with the abdominal bracing technique and walking in an abdominal relaxation state (normal gait). Muscle activity was measured on the dominant side of all subjects using surface electromyography, and the attachment sites were the erector spinae, external oblique, internal oblique, vastus lateralis, and vastus medialis oblique muscles. Each condition was measured three times to calculate and analyze the average value. Results: When walking using the abdominal brace technique, the muscle activity of the erector spinae, external oblique, internal oblique, and vastus lateralis increased significantly (p<0.05), and the muscle activity of the vastus medialis increased as well but was not significant. Conclusions: The results of this study indicate that it is possible to be used as an effective guide to increasing the muscle activity and stability of the trunk and lower extremities through the application of the abdominal bracing technique during walking.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.1
• /
• pp.118-130
• /
• 2023

Decay or large cavities inside trees are the main causes of trees overturning and broken branches, and structurally weakened trees are more vulnerable to strong winds and heavy snowfall. Recently, as strong winds and typhoons increase due to climate change, the damage to human life and property due to trees overturning continues to increase, and cultural assets are in a similar situation. In particular, old big trees are structurally vulnerable to external shocks such as strong winds and heavy snowfall. This study was aimed at providing a scientific basis for preventive protection measures by conducting a structural stability diagnosis of seven retusa fringe trees designated as natural monuments. For the structural stability diagnosis, tree risk assessment and internal tree defect measurements were performed. As a result of the tree risk assessment, the Retusa Fringe Trees in Sinjeon-ri, Yangsan and Gwangyangeupsu had the highest risk of broken branches due to weak branch attachment strength. As a result of the diagnosis of internal defects of cross sections of measured trees, there were suspected cavities or severe decay in all except two trees of the population of Retusa Fringe Trees in Pyeongji-ri. Natural disasters due to climate change are increasing, and the scale is getting larger, so it is very important to preemptively manage large old trees through scientific structural safety diagnosis to manage trees that are vulnerable to environmental changes.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.15 no.1
• /
• pp.86-89
• /
• 2011

Purpose: The KOTRON-13 cyclotron was developed in South Korea and was introduced to regional cyclotron centers to produce short-lifetime medical radioisotopes. However, this cyclotron has limited capacity to produce carbon-11 isotope so far. We herein study how to develop and optimize an effective carbon-11 target system in the KOTRON-13 cyclotron by changing cooling system, combing with fluorine-18 target and evaluating beam currents. Materials and Method: To develop the optimal carbon-11 target and an effective cooling system, we designed the carbon-11 target system by Stopping and Range of Ions in Matter (SRIM) simulation program and considered the cavity pressure during irradiation at target grid. In this investigation, we evaluated the yield of carbon-11 production at different beam currents and the stability of the operation of the KOTRON-13 cyclotron. Results: The production of carbon-11 was enhanced from about 1.700 mCi ($50{\mu}A$) to 2,000 mCi ($60{\mu}A$) on the carbon-11 target which developed by seoul national university bundang hospital (SNUBH) and Samyoung Unitech. Additionally, the cooling condition was showed stable to produce carbon-11 under high beam current. Conclude: The carbon-11 target system of the KOTRON-13 cyclotron was successfully developed and improved carbon-11 production. Consequently, the operation of carbon-11 target system was highly effective and stable compare with other commercial cyclotrons. Our results are believed that this optimal carbon-11 target system will be helpful for the routine carbon-11 production in the KOTRON-13 cyclotron.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.6
• /
• pp.699-713
• /
• 2003

Statement of problem. Titanium is the most important material for biomedical and dental implants because of their high corrosion resistance and good biocompatibility. These beneficial properties are due to a protective passive oxide film that spontaneously forms on the surface. Purpose. The purpose of this study was to evaluate the responses of osteoblast-like cells on different surface treatments on Ti discs. Material and Methods. Group 1 represented the machined surface with no treatment. Group 2 surfaces were sandblasted with $50{\mu}m\;Al_2O_3$ under $5kgf/cm^2$ of pressure. Groups 3 and 4 were sandblasted under the same conditions. The samples were treated on a titanium oxide surface with reactive sputter depositioning and thermal oxidation at $600^{\circ}C$ (Group 3) and $800^{\circ}C$ (Group 4) for one hour in an oxygen environment. The chemical composition and microtopography were analyzed by XRD, XPS, SEM and optical interferometer. The stability of $TiO_2$ layer was studied by petentiodynamic curve. To evaluate cell response, osteoblast extracted from femoral bone marrow of young adult rat were cultured for cell attachment, proliferation and morphology on each titanium discs. Results and Conclusion. The results were as follows : 1. Surface roughness values were, from the lowest to the highest, machined group, $800^{\circ}C$ thermal oxidation group, $600^{\circ}C$ thermal oxidation group and blasted group. The Ra value of blasted group was significantly higher than that of $800^{\circ}C$ thermal oxidation group (P=0.003), which was not different from that of $600^{\circ}C$ thermal oxidation group (P<0.05). 2. The degree of cell attachment was highest in the $600^{\circ}C$ thermal oxidation group after four and eight hours (P<0.05), but after 24 hours, there was no difference among the groups (P>0.05). 3. The level of cell proliferation showed no difference among the groups after one day, three days, and seven days (P>0.05). 4. The morphology and arrangement of the cells varied with surface roughness of the discs.

• Journal of Convergence for Information Technology
• /
• v.11 no.7
• /
• pp.181-188
• /
• 2021

This study was performed to examine the strategy method for the sustainable stability and effectiveness of small and medium hospital, where the relationship between perceptual satisfaction and expectation factors for special hospital was analyzed. The structural questionnaire was given to the residents of Busan and Gyungnam over the age of 20 and the square contingency and the logistical regression were employed for the analysis of the results. First, the respondent with 68.0% has realized the hospital claiming to be characterization as the special hospital and the Ministry of Health and Welfare designated hospital was identified to the respondent of 21.3%. Second, perceptual satisfaction with expectation level was satisfied to the most visitor in case of visiting special hospitals with subjective perception and was confirmed to the intention of revisiting consistently. Third, for the perceptual satisfaction of visiting with expectation level, the safety and the quality of treatment affected significantly the cause-and-effect. The result has provided the useful information with the establishment of a strategy for the long-term and continued effect through the perceptual satisfaction and the emotional attachment.

• Mycobiology
• /
• v.40 no.1
• /
• pp.35-41
• /
• 2012

A repeated batch fermentation system was used to produce ethanol using $Saccharomyces$ $cerevisiae$ strain (NCIM 3640) immobilized on sugarcane ($Saccharum$ $officinarum$ L.) pieces. For comparison free cells were also used to produce ethanol by repeated batch fermentation. Scanning electron microscopy evidently showed that cell immobilization resulted in firm adsorption of the yeast cells within subsurface cavities, capillary flow through the vessels of the vascular bundle structure, and attachment of the yeast to the surface of the sugarcane pieces. Repeated batch fermentations using sugarcane supported biocatalyst were successfully carried out for at least ten times without any significant loss in ethanol production from sugarcane juice and molasses. The number of cells attached to the support increased during the fermentation process, and fewer yeast cells leaked into fermentation broth. Ethanol concentrations (about 72.65-76.28 g/L in an average value) and ethanol productivities (about 2.27-2.36 g/L/hr in an average value) were high and stable, and residual sugar concentrations were low in all fermentations (0.9-3.25 g/L) with conversions ranging from 98.03-99.43%, showing efficiency 91.57-95.43 and operational stability of biocatalyst for ethanol fermentation. The results of the work pertaining to the use of sugarcane as immobilized yeast support could be promising for industrial fermentations.