• Structural Engineering and Mechanics
• /
• 제63권1호
• /
• pp.47-53
• /
• 2017

The fundamental goal of this study is to minimize the uncertainty of the median fragility curve and to assess the structural vulnerability under earthquake excitation. Bayesian Inference with Markov Chain Monte Carlo (MCMC) simulation has been presented for efficient collapse response assessment of the independent intake water tower. The intake tower is significantly used as a diversion type of the hydropower station for maintaining power plant, reservoir and spillway tunnel. Therefore, the seismic fragility assessment of the intake tower is a pivotal component for estimating total system risk of the reservoir. In this investigation, an asymmetrical independent slender reinforced concrete structure is considered. The Bayesian Inference method provides the flexibility to integrate the prior information of collapse response data with the numerical analysis results. The preliminary information of risk data can be obtained from various sources like experiments, existing studies, and simplified linear dynamic analysis or nonlinear static analysis. The conventional lognormal model is used for plotting the fragility curve using the data from time history simulation and nonlinear static pushover analysis respectively. The Bayesian Inference approach is applied for integrating the data from both analyses with the help of MCMC simulation. The method achieves meaningful improvement of uncertainty associated with the fragility curve, and provides significant statistical and computational efficiency.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.911-916
• /
• 2001

Structural acoustic modification method based on the structural mobility analysis is applied to reduce the structure-borne noise radiated from hard disk drive system. Sound intensity techniques and ODS(Operational Deflection Shape) techniques are also used in order to provide the structural acoustic information for the mobility modification. The sound intensity is for the acoustic visualization of the noise source locations, and the ODS is for the visualization of the vibration pattern and its dynamic characteristics of the noise sources. Using visualization information of sound and vibration, local structural input mobility is reduced in the frequency band of interest by designing asymmetrical wave-stringer structure in the wave-number domain as well as frequency domain. The overall sound pressure level is reduced by 4dB and its controlled sound power radiated from the disk drive is proved to under 2.8Bel in idle-spinning mode and 3.1 Bel in random-seeking mode, which are the lowest noise levels in the hard disk drive industry.

• 한국음향학회지
• /
• 제24권1호
• /
• pp.38-42
• /
• 2005

기존의 음성신호와 다른 주파수 대역을 사용하여 데이터 통신이 가능한 ADSL 모뎀 송수신단의 CMOS 아날로그 저역 능동필터를 각각 설계하여 제안하였다. 설계된 필터는 2.5V의 저전압 동작이 가능하며, 각각의 설계사양에 따라 송신단에서는 138kHz의 차단주파수값을 갖는 저역통과 능동필터가 수신단에서는 1,100kHz의 차단주파수 특성을 갖는 저역통과능동필터가 설계 되었다. 이득과 단위이득주파수 특성 면에서 개선된 high-swing cascode방식의 저전압 능동소자가 필터를 설계하기 위한 기본 블록으로 이용되었다. 제안된 소자와 설계 제안된 필터는 $0.251{\mu}m\;CMOS\;n-well$ 공정 파라미터를 이용하여 그 특성이 검증되었다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권4호
• /
• pp.376-382
• /
• 2014

In this paper, a 9-bit 1GS/s high precision folding A/D converter with a 45 nm CMOS technology is proposed. In order to improve the asymmetrical boundary condition error of a conventional folding ADC, a novel scheme with an odd number of folding blocks is proposed. Further, a new digital encoding technique is described to implement the odd number of folding technique. The proposed ADC employs a digital error correction circuit to minimize device mismatch and external noise. The chip has been fabricated with 1.1V 45nm Samsung CMOS technology. The effective chip area is $2.99mm^2$ and the power dissipation is about 120 mW. The measured result of SNDR is 45.35 dB, when the input frequency is 150 MHz at the sampling frequency of 1 GHz. The measured INL is within +7 LSB/-3 LSB and DNL is within +1.5 LSB/-1 LSB.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권1호
• /
• pp.91-98
• /
• 2012

Climate change and other pollutions make a huge demand of environment friendly and high efficient motors especially Brushless DC (BLDC) motors. Generally, bidirectional energized BLDC motors are used widely; however, inverter devices used in the driver put fear of being effected by noise. This paper proposes unidirectional energized BLDC motor which utilizes asymmetrical H-bridge circuit as the driver circuit. The Minato motor is one of the pioneers in unidirectional energized system. The use of bar magnets in the rotor is one of the biggest disadvantages of the motor. We proposed using tabular magnets. The paper compares the power consumption and efficiency of the Minato motor and the proposed motor. During high speed rotation, undesirable armature current is generated that has a deceleration characteristic. This current lowers the motor's efficiency. In this paper, we propose the solutions and show comparison through equations of the copper loss ratio for the Minato and our proposed motors. The third motor, which has the highest efficiency, was discovered during examination of the equations.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.943-944
• /
• 2007

In this paper, the development and the test of 13.2kV/630A high-Tc superconducting fault current limiting coil are described. The fault current limiting coil made of Coated Conductor (CC) was fabricated with bifilar winding method for non-inductive characteristics and tested in the distribution power system level in Dec. 2006. In order to determine the length of the superconducting coil, applied voltage per unit length(V/m) was studied analytically and it was verified through experiments. For the volume minimization, the coil was designed with concentrical arrangement method. The short-circuit test was performed with the prospective fault current of asymmetrical 10kA whose maximum fault current was $30kA_{peak}$. In the test, the voltage drop and the current of the coil were measured and the resistance of the coil was obtained. Also, the temperature rise of the coil was calculated with the relationship between the resistance and the temperature of CC. In this paper, the experimental results are analyzed and compared with the simulation.

• 드라이브 ㆍ 컨트롤
• /
• 제14권4호
• /
• pp.9-16
• /
• 2017

In this study, the force tracking performance of the single-rod and double-rod type EHAs (Electro-Hydrostatic Actuators) was compared by computer simulation and experiments. The force-controlled EHAs exhibit non-linear behavior that are significantly dependent on operation conditions. The investigation focused on localizing the parameters that provide significant rise to the non-linearity. For this, the single-rod and double-rod type EHAs were mathematically expressed to derive their linear models. In parallel, they were modeled by a commercial simulation program including non-linear properties based on experimental results. It was shown that the dependency of the bulk modulus of oil with entrapped air on working pressure dominated the non-linearity in force control performance in case of the double-rod type EHA. The force control of the single-rod type EHA was influenced by much more elements. Besides the asymmetrical piston geometry and the non-linear bulk modulus of oil, its pilot-operated check valves made it dependent not only on the magnitude of reference input but also on its direction.

• 한국전자통신학회논문지
• /
• 제13권6호
• /
• pp.1177-1182
• /
• 2018

UCC3895 드라이버를 이용하여 위상천이방식의 100Mhz로 운용되는 500W급 영전압스위칭(Zero voltage switching) DC/DC 컨버터를 설계하였다. UCC3895 드라이버의 데드타임은 풀브리지의 리딩래그와 레깅래그가 별도로 구동 가능하도록 설계되어 있어 두 래그간에 데드타임을 별도로 부여하는 것이 가능하며, 이것은 두 래그간에 비대칭관계인 데드타임으로 영전압스위칭의 구현을 가능하게 하였다. 또한 본 논문에서는 안정된 출력전압을 위한 부귀환회로 설계방식이 제안되었다. 시제품의 최대 효율은 $500{\Omega}$의 부하에서 95.5% 정도를 나타냈다.

• 유통과학연구
• /
• 제21권5호
• /
• pp.101-111
• /
• 2023

Purpose: The purpose of this paper is to examine the effect of the VKOSPI index on short-term stock returns after a large-scale stock price shock of individual stocks of firms in the distribution industry in Korea. Research design, data, and methodology: This study investigates the effect of the change of the VKOSPI index or investor mood on abnormal returns after the event date from January 2004 to July 2022. The significance of the abnormal return, which is obtained by subtracting the rate of return estimated by the market model from the rate of actual return on each trading day after the event date, is determined based on T-test and multifactor regression analysis. Results: In Korea's distribution industry, the simultaneous occurrence of a bad investor mood and a large stock price decline, leads to stock price reversals. Conversely, the simultaneous occurrence of a good investor mood and a large-scale stock price rise leads to stock price drifts. We found that the VKOSPI index has strong explanatory power for these reversals and drifts even after considering both company-specific and event-specific factors. Conclusions: In Korea's distribution industry-related stock market, investors show an asymmetrical behavioral characteristic of overreacting to negative moods and underreacting to positive moods.

• 해양환경안전학회지
• /
• 제30권1호
• /
• pp.108-117
• /
• 2024

본 연구에서는 너클 라인이 다수 존재하면서 안팎 형상이 비대칭으로 설계된 특이점을 갖는 쌍동선의 자항성능을 예측하기 위해 CFD 해석을 수행하였고, 해석 기법에 따른 차이를 파악하기 위해 MRF(Moving Reference Frame) 기법과 SDM(Sliding Mesh) 기법을 적용하였다. MRF 기법을 적용한 경우에는 time step당 프로펠러를 1˚ 회전시켰고, SDM 기법의 경우 10˚, 5˚, 1˚씩 회전시키며 각 기법별 예측된 자항성능을 비교하였다. 자항점 추정을 위한 몇 가지 프로펠러 회전수에서의 해석 결과 중 프로펠러의 토크는 기법에 따른 차이가 거의 없었지만 추력 및 선체가 받는 저항은 MRF 기법보다는 SDM 기법을 적용했을 때 더 낮게, SDM 기법의 time step당 프로펠러 회전각이 작을수록 높게 계산되었다. 선형 내삽을 통해 추정된 자항점의 프로펠러 회전수, 추력, 토크와 실선 확장법을 사용해 추정된 실선의 전달동력, 반류 계수, 추력 감소 계수 및 프로펠러 회전수도 동일한 경향을 보였으며, 대부분의 자항효율은 반대의 경향을 보였다. 프로펠러 후류의 경우 MRF 기법을 적용했을 때 정확도가 떨어졌고, SDM 기법의 time step당 프로펠러 회전각에 따라 표현되는 후류의 차이는 거의 없었다.