• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2002.02a
• /
• pp.135-137
• /
• 2002

In the favor of adjusting microwave signal, Hairpin type Filter, which delay microwave signal enough to several nanosecond, is a key component. One of the main advantage in using Hairpin type Filter is a conveniency for equipping with Delay Module, and because of having a wide bandwidth, Hairpin type Filter can be designed to satisfy the most applications. In this work, we attempted to estimate the delay time in a superconductive hairpin type filter A software to synthesize even and odd order equiripple hairpin type filter has been developed. This software arbitrarily locate its transfer zeros making symmetric of asymmetric amplitude response and equalizing group delay. Borland C++ compiler has been used. The program was designed to run under MS-DOS, Window 98, Window 2000. The program optimizes the position of the transfer function zeros in order to fulfill the group delay specification masks. We designed and fabricated a hairpin type HTS 2-pole microstrip bandpass filter to operate at 5.8Ghz. The fabrication method was pulsed laser deposition and YBCO films were deposited on sapphire substrates with a Ce$O_{2}$ thin layer as a buffer layer. We also developed a new style hairpin type filter by using interdigitide inner-pole. Compared to the same size regular hairpin type filters, our filters had a lower center frequency.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.6
• /
• pp.8-15
• /
• 2012

In this paper, we investigated possible optical parameters causing deviation of experimentally observed output spectra from theoretically predicted results in a high-order fiber comb filter based on a polarization-diversity loop configuration. They include wavelength dependency of half-wave plates (HWPs) inserted in the filter for wavelength switching and the modal birefringence of single-mode fibers (SMFs) with which optical components comprising the filter are connected. In order to consider the effect of the modal birefringence of the SMF on a filter performance, it is modeled as a low birefringence fiber with an arbitrary orientation angle and birefringence. It is found from the simulation results that the modal birefringence of SMFs strongly affects the spectral characteristics of the filter and decreases the extinction ratio of the filter, compared with the wavelength dependency of HWPs. In particular, it is also confirmed that the spectral deviation and asymmetric distortions of side-lobes in narrow band transmission spectra result mainly from the modal birefringence of SMFs.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.939-946
• /
• 2008

본 논문은 시청자의 위치에 최적화된 입체음향을 제공하는 TV 개발에 관한 것으로 2 개의 TV 스피커만으로 5.1 채널 스피커가 주는 입체음향 효과를 제공해준다. 기존의 Speaker Virtualizer 기술은 시청자가 특정 위치(Sweet Spot)를 벗어나면 입체음향 성능이 현저히 저하된다. 반면, 본 논문에서 제안하는 Adaptive Virtualizer 기술은 초음파가 장착된 리모콘을 사용하여 시청자의 위치를 인식하고 인식된 시청자의 위치 정보를 활용하여 청취위치에 해당하는 HRTF로부터 설계된 Filter를 Update 하고 두 스피커의 출력레벨 및 시간지연 값을 보정함으로써 최적의 입체음향을 재현한다. 본 논문에서는 실시간 구현을 위해 Speaker Virtualizer의 계산량을 최소화하는 기술을 제안하고 다양한 청취 위치에 해당하는 Filter를 설계하고 설계된 Filter를 효율적으로 Update 하는 Adaptive Virtualizer 기술을 제안한다. 또한, 초음파를 이용한 시청자 위치 인식 기술 및 전체 시스템 통합 기술을 제시한다.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2006.07a
• /
• pp.315-315
• /
• 2006

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.9C
• /
• pp.871-876
• /
• 2005

In this paper, we propose an improved partial response maximum likelihood (PRML) detection scheme that has an adaptive equalizer and can be applied in the asymmetric optical recording system with high-density. We confirmed that the proposed PRML detector improves detection performance. In addition, we implemented the detector by Verilog HDL. The adaptive equalizer is composed of tap coefficient updating unit using LMS algorithn and FIR filter. FIR filter is implemented by the transposed direct form architecture for high speed operation. Viterbi detector is implemented by the register exchange method.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.3
• /
• pp.173-178
• /
• 2019

To analyze the diffraction properties of optical signals by periodic blazed 2D diffraction gratings, Toeplitz dielectric tensor is first defined and formulated by 2D spatial Fourier expansions associated with asymmetric blazed grating profile. The characteristic modes in each layer is then based on eigenvalue problem, and the complete solution is found rigorously in terms of modal transmission-line theory (MTLT) to address the pertinent boundary-value problems. Toeplitz matrix of symmetric and sawtooth profiles is derived from that of asymmetric blazed grating profile, and the diffraction properties for each profile are numerically simulated. The numerical results reveal that the asymmetric and symmetric profiles behave as anti-reflection GMR filter while the sawtooth profile works better as anti-transmission one rather than anti-reflection filter.

• Journal of Radiation Protection and Research
• /
• v.38 no.4
• /
• pp.194-201
• /
• 2013

To investigate monitoring unit (MU) efficiency and plan quality of volumetric modulated arc therapy (VMAT) using flattening-filter free (FFF) photon beam in association with target size and location. A virtual patient was generated in Eclipse$^{TM}$ (ver. A10, Varian Medical Systems, Palo Alto, USA) treatment planning system. The length of major and minor axis in axial view was 50 cm and 30 cm, respectively. Cylindrical-shaped targets were generated inside that patient at the center (symmetric target) and in the periphery (asymmetric target, 7.5 cm away from the center of the patient to the right direction) of the virtual patient. The longitudinal length was 10 cm and the diameters were 2, 5, 10 and 15 cm. Total 8 targets were generated. RapidArc$^{TM}$ plans using TrueBeam STx$^{TM}$ were generated for each target. Two full arcs were used and the axis of rotation of the gantry was set to be at the center of the virtual patient. Total MU, homogeneity index (HI), target mean dose, the value of gradient measure and body mean dose were calculated. In the case of symmetric targets, averaged total MU of FFF plan was 23% and 19% higher than that of flattening filter (FF) plan when using 6 MV and 10 MV photons, respectively. The difference of HI, target mean dose, gradient measure and body mean dose between FF and FFF was less than 0.04, 2.6%, 0.1 cm and 2.2%, respectively. For the asymmetric targets, total MU of FFF plan was 21% and 32% was higher than that of FF when using 6 MV and 10 MV photons, respectively. The homogeneity of the target was always worse when using FFF than using FF. The maximum difference of HI was 0.22. The target mean dose of FFF was 3.2% and 4.1% higher than that of FF for the 6 MV and 10 MV, respectively. The difference of gradient measure was less than 0.1 cm. The body mean dose was higher when using FFF than FF about 4.2% and 2.8% for the 6 MV and 10 MV, respectively. No significant differences between VMAT plans of FFF beam and FF beam were observed in terms of quality of treatment plan. The HI was higher when using FFF 10 MV photons for the asymmetric targets. The MU was increased noticeably when using FFF photon beams.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.74-75
• /
• 2000

WDM(wavelength-division multiplexing) 광통신 네트웍을 이루는 핵심기술중의 하나는 ADF(Add-drop Filter)의 구현에 있다. 광섬유격자와 여러형태의 구조를 이용한 ADF들 중에서도 비대칭 결합기와 광섬유 격자를 이용한 구조는, 간섭계 구조가 아니기 때문에 제작이 용이하고 보다 안정된 특성을 보일 것으로 기대되어 많은 관심을 갖게 하고 있다$^{(1)}$ . 비대칭 결합기 구조의 경우, 두 광도파로의 코어반경이나 굴절율 분포가 서로 다르기 때문에, 일반적으로 광파의 결합이 일어나지 않는다. 그러나 브래그 격자의 반사조건을 만족하는 파장성분의 경우 입력단(input port)에서 드롭단(drop port)으로 반사되어 나오고, 그 외의 파장성분은 출력단(Output port)으로 나오게 되어 드롭 기능을 수행하게 된다. 비슷한 원리로 add port에서 출력단으로의 add 기능도 수행된다. 본 논문에서는 연산자 분리 시영역 모델$^{(2)}$ 을 이용하여 비대칭구조에서의 파장응답 특성을 해석하였다. 또한 최적화를 위한 조건을 알아 보고, 소자 설계에 필요한 파라미터를 정의하여 최적설계에 필요한 파라미터를 구하였다. (중략)

• ETRI Journal
• /
• v.28 no.2
• /
• pp.223-226
• /
• 2006

This letter presents a new approach to synthesize the resonator filters of an arbitrary topology. This method employs an optimization method based on the relation between the polynomial coefficients of the transfer function and those of the $S_{21}$ from the coupling matrix. Therefore, this new method can also be applied to self-equalized filters that were not considered in the conventional optimization methods. Two microwave filters, a symmetric 4-pole filter with four transmission zeros (TZs) and an asymmetric 8-pole filter with seven TZs, are synthesized using the present method for validation. Excellent agreement between the response of the transfer function and that of the synthesized $S_{21}$ from the coupling matrix is shown.

• Journal of Electrical Engineering and Technology
• /
• v.3 no.3
• /
• pp.430-435
• /
• 2008

In the paper, an algorithm called a Constraint algorithm is proposed to solve the fan-in problem occurred in ADC encoding circuits. The Flash ADC architecture uses a double-base number system (DBNS). The DBNS has known to represent the multi-dimensional logarithmic number system (MDLNS) used for implementing the multiplier accumulator architecture of FIR filter in digital signal processing (DSP) applications. The authors use the DBNS with the base 2 and 3 to represent binary output of ADC. A symmetric map is analyzed first, and then asymmetric map is followed to provide addition read DBNS to DSP circuitry. The simulation results are shown for the Double-Base Integer Encoder (DBIE) of the 6-bit ADC to demonstrate an effectiveness of the Constraint algorithm, using $0.18{\mu}\;m$ CMOS technology. The DBIE’s processing speed of the ADC is fast compared to the FAT tree encoder circuit by 0.95 GHz.