• 소성∙가공
• /
• 제12권8호
• /
• pp.738-743
• /
• 2003

The major problems of a plastic injection mould can be devided into two kinds, one is in mould another in injected parts. Most of defects of the former comes from mould design, such as, structure and working. The latter are weld line, warpage, sink mark, burning, flow mark, scratching, shading, black hole and so on. Most of problems in injection molding are difficult to find the reason because of complexity. The purpose of this paper is to improve the quality of plastic injection mould and parts with inquiring the counter plan and analizing troubles of the part of Flat TV Front Cover by flow control method and gas-assisted injection moulding. For minimizing defects of the injection moulded parts, computer aided simulation method for injection mould filling was used. Based on these numerical results, the guidelines of mould design and injection processing condition were established. As a result, the improvement of quality, such as minimizing surface defects of injection moulding parts and troubles in mould was achieved.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.131.2-135
• /
• 1999

This study focuses on part quality and cycle times under gas-assisted injection molding(GIM) of housing molded parts. The position of the gas channel was estabished near to parting line at the end of last locations to fill. Applied hot runner and valve gates the gas was introduced directly into the mold cavity via gas pin. As GIM was applied the introduced directly into the mold cavity via gas pin. As GIM was applied the conclusion reached as follows. I) The quality of appearance was improved by reducing sink marks and scratches of texture ii) The realibility was improved by preventing warpages and reinforcing rigidity through optimum gas channel layout iii)It is enable to use small size of injection molding machine step by step as GIM was accomplished low pressure and reduced clamp forces against CIM iv)The productivity were improved by reducing cycle times.

• 펄프종이기술
• /
• 제34권2호
• /
• pp.67-72
• /
• 2002

The two stage laccase-assisted delignification process led to significant lignin removal in the non-pressurized treatments. It is clearly shown that an alkaline extraction prior to the second laccase treatment significantly increased the overall delignification by ∼15%. This is in line with the contention that the residual lignin has undergone structural changes during the alkaline extraction, and the resulting modified structures are susceptible to the laccase oxidation. In phenolic hydroxyl group, the pre- methylated sample was very responsive to the delignification process. The phenolic hydroxyl groups could be increased during side chain cleavage catalyzed by laccase. This finding demonstrates that the delignification oi etherified structures is an important reaction in the delignificaton by laccase.

• Mass Spectrometry Letters
• /
• 제7권4호
• /
• pp.91-95
• /
• 2016

In recent years, matrix-free laser desorption ionization (LDI) for mass spectrometry of thermally labile molecules has been an important research subject in the pursuit of new ionization methods to serve as alternatives to the conventional matrix-assisted laser desorption ionization (MALDI) method. While many recent studies have reported successful LDI of thermally labile molecules from various surfaces, mostly from surfaces with nanostructures, understanding of what drives the LDI process still requires further study. This article briefly reviews the thermal aspects involved in the LDI mechanism, which can be characterized as rapid surface heating. The thermal mechanism was supported by observed LDI and postsource decay (PSD) of peptide ions produced from flat surfaces with special thermal properties including amorphous Si (a-Si) and tungsten silicide ($WSi_x$). In addition, the concept of rapid surface heating further suggests a practical strategy for the preparation of LDI sample plates, which allows us to choose various surface materials including crystalline Si (c-Si) and Au tailorable to specific applications.

• 제어로봇시스템학회논문지
• /
• 제14권9호
• /
• pp.963-968
• /
• 2008

A new method to deal with GPS indoor positioning by means of time synchronized switching GPS repeater has been developed by authors[1]. But the developed indoor positioning system has problems. Therefore, we proposed a method for indoor positioning using GNSS Repeater-Assisted. To solve the 3-dimensional user's position, the 4 or more retransmission antennas are needed in the previously proposed methods. If a GPS repeater periodically transmits the signal like as pseudollite, the information for assisting an acquisition and tracking can be informed to receiver. Then, the user position can be calculated using the induced weak signal. The advantage of the proposed algorithm is use of only 1 re-transmission antenna because the re-transmitted signal are not used for positioning but used for assisting an acquisition and tracking weak signals induced indoor. We analyze the propose algorithms through the experiment and performed the test of feasibility.

• Asian-Australasian Journal of Animal Sciences
• /
• 제14권4호
• /
• pp.587-596
• /
• 2001

In the last decade, rapid developments in molecular biotechnology and of genomic tools have enabled the creation of dense linkage maps across whole genomes of human, plant and animals. Successful development and implementation of interval mapping methodologies have allowed detection of the quantitative trait loci (QTL) responsible for economically important traits in experimental and commercial livestock populations. The candidate gene approach can be used in any general population with the availability of a large resource of candidate genes from the human or rodent genomes using comparative maps, and the validated candidate genes can be directly applied to commercial breeds. For the QTL detected from primary genome scans, two incipient fine mapping approaches are applied by generating new recombinants over several generations or utilizing historical recombinants with identity-by-descent (IBD) and linkage disequilibrium (LD) mapping. The high resolution definition of QTL position from fine mapping will allow the more efficient implementation of breeding programs such as marker-assisted selection (MAS) or marker-assisted introgression (MAI), and will provide a route toward cloning the QTL.

• Journal of Yeungnam Medical Science
• /
• 제24권1호
• /
• pp.91-96
• /
• 2007

Extrapelvic endometriosis is a rare disease. The majority of extrapelvic endometriosis cases involve scar tissue following obstetric and gynecologic procedures. We have treated two cases of extrapelvic incisional endometriosis. A 39 year old female patient with cyclic vaginal spotting after laparoscopic assisted vaginal hysterectomy due to uterine myoma and a 35 year old female patient with a painful palpable abdominal mass after cesarean section. Both underwent complete excision and were proven to have endometriosis by pathology. Here we report on both cases and review the medical literatures.

• Asian Pacific Journal of Cancer Prevention
• /
• 제14권5호
• /
• pp.2871-2877
• /
• 2013

Objectives: To evaluate the safety, efficacy, and invasiveness of lobectomy by video-assisted thoracoscopic surgery (VATS) in the treatment of stage I/II non-small cell lung cancer (NSCLC). Methods: A total of 148 patients presenting with Stage I or II NSCLC were enrolled into our study, comprising 71 who underwent VATS and 77 patients undergoing conventional thoracotomic lobectomy, in combination with systematic lymph node resection. Results: It was found that VATS was superior to conventional thoracotomy in terms of the duration of surgery, intraoperative blood loss, frequency of the need to administer postoperative analgesia, thoracic intubation indwelling time, post-operative hospital stay, and survival rate (P<0.05). We saw no obvious difference in the number of resected lymph nodes with either approach. Conclusions: VATS lobectomy is a safe and reliable surgical approach for the treatment of Stage I/II NSCLC, characterized by significantly minimal invasiveness, rapid post-operative recovery, and markedly lower loss of blood.

• Journal of Korean Neurosurgical Society
• /
• 제52권6호
• /
• pp.555-557
• /
• 2012

We report an uncommon case of a 45-year-old woman who presented with spontaneous rhinorrhea. A computed tomography (CT) scan of the head revealed an abnormally large sphenoid sinus associated with a parasellar bony defect (Sternberg's canal) through which magnetic resonance imaging could detect an encephalocele of the right temporal lobe. An endoscope-assisted trans-sphenoidal approach was performed and, with the aid of image guided surgery, reduction of the encephalocele was obtained and followed by surgical repair of the dural and bony defects. The postoperative course was uneventful and the cerebrospinal fluid fistula was closed as confirmed by the postoperative CT scan and by the absence of rhinorrhea. After three years of monitoring the patient remained asymptomatic.

• 로봇학회논문지
• /
• 제4권3호
• /
• pp.177-184
• /
• 2009

This paper presents an active assisted-living system in wireless sensor and actor network (WSAN) in which the mobile robot roles an actor. In order to provide assisted-living service to the elderly people, position recognition of the sensor node attached on the user and localization of the mobile robot should be performed at the same time. For the purpose, we use received signal strength indication (RSSI) to find the position of the person and ubiquitous sensor nodes including ultrasonic sensor which performs both transmission of sensor information and localization like global positioning system. Active services are moving to the elderly people by detecting activity sensor and visual tracking and voice chatting with remote monitoring system.