• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.4
• /
• pp.506-515
• /
• 1999

Dental practice can produce and spread some infectious diseases from patients to dentist, dental assistant, and dental labors. One possible method for preventing these cross-contamination is to immerse dental impression in chemical disinfectants. So for many investigators studied on the dimensional changes of dental impressions and on the surface qualities of stone casts made from impression following immersion in disinfectants. This study was proposed to evaluate some popular impression disinfectant combination from the point of dimensional stability. Impression was taken from dental arch-shaped metal model. Irreversible hydrocolloid and 3 elastomers(polyvinyl siloxane, polysulfide, polyether) were immersed in 3 disinfectants (2% glutaraldehyde, 1% povidone-iodine, 0.5% sodium hypochlorite) for 10 minutes and measured both cross-arch and anterior-posterior distance under stereo microscope to evaluate dimensional change. The results obtained were as follows: 1. Dimensional changes of irreversible hydrocolloid impression was statistically different in cross-arch and anterior-posterior distance when immersed in 2% glutaraldehyde solution and in anterior-posterior distance when immersed in 0.5% sodium hypochlorite solution from control group (p<0.05). 2. Dimensional changes of polyvinyl siloxane and polysulfide impression were not statistically different from control group (p>0.05). 3. Dimensional changes of polyether impression was statistically different in cross-arch distance when immersed in 0.5% sodium hypochlorite solution and in anterior-posterior distance when immersed in 1% povidone-iodine solution from control group (p<0.05). 4. In all cases, dimensional changes were less than 0.1% from the original dimension and concluded clinically acceptable.

• Culinary science and hospitality research
• /
• v.5 no.1
• /
• pp.105-127
• /
• 1999

The purpose of this study was to investigate cook′s duties in the School Foodservice law, comparing with those of other countries and to suggest the more useful details of cook′s duties. As a result of this study many things of the cook′s duties in the School Foodservice law have to be changed. If then, the gap of the School Foodservice law and Food Sanitation law will be decreased, logical application of two laws could be possible and a lot of cook′s abilities could be enoughly used. Compared with other countries, cooks can be responsible officials in the School Foodservice. Suggestions about cook′s duties in the School Foodservice law are as follows. 1. Not only dietitian but also cook should be subscribed as a responsible official in the School Foodservice law. 2. Not only the duties of dietitian but also those of cook should be subscribed in the School Foodservice law. 3. Cook as a responsible official of School Foodservice should investigate the food as well as dietitian. 4. Dietitian teaches cook and assistant cook how to cook presently by the School Foodservice law, but cook should teach how to cook because cooking is cook′s major and cook gets the national certificate of cooking. 5. Cooks do job under dangerous circumstances, so extra money should be paid to cooks. 6. Even if not being described in the law and education of sanitation is presently done in the cook′s reeducation, dietitian educates sanitation to cook, so it has to be changed. Cook can educate sanitation to other workers in the School Foodservice. 7. The name of office room in the School Foodservice systems "dietitian′s room" should be changed to "Foodservice office room". If those suggestions are accomplished, cooks and dietitians can cooperate effectively and respectfully and the better School Foodservice can be served to students.

• The Journal of the Korean dental association
• /
• v.52 no.12
• /
• pp.734-743
• /
• 2014

Objectives: By introduced reciprocation motion file in dentistry, dentists benefit simple canal shaping procedure and time-saving. But, reciprocation motion generates uncomfortable vibration to doctors and patients. Because there was no study about this consideration, this study compared vibration pattern and power generated from reciprocation motion motor and conventional rotary motor. Materials & Methods: One conventional rotary motor; X-Smart (Dentsply Maillefer, Ballaigues, Switzerland); and two reciprocating motors; WaveOne Motor (Dentsply Maillefer, Ballaigues, Switzerland) and X-SMART PLUS (Dentsply Maillefer, Ballaigues, Switzerland); were used in this study. Triaxial $ICP^{(R)}$ Accelerometer (Model 356A12, PCB piezotronics, New York, USA) was attached on motor's handpiece head, and was measured tri-axial vibratory acceleration with NI Sound and Vibration Assistant 2009 software (National Instruments, Texas, USA). Mean vibratory acceleration and maximum vibratory acceleration was measured on fixed position and handed position. The results of vibratory acceleration were statistically analyzed using ANOVA and multiple comparisons are made using Turkey's test at p<0.05 level. Results: Reciprocating motors showed higher mean vibratory acceleration and maximum vibratory acceleration than conventional rotary motor (p<0.05). Between reciprocating motors, X-SMART PLUS had lower mean vibratory acceleration and maximum vibratory acceleration than WaveOne Motor (p<0.05). Conclusion: Reciprocating motors generate more vibration than conventional rotary motor. Further study about effect of vibration to dentist and patient is needed. And it seems to be necessary to make a standard about vibration level in endodontic motors.

• Hwankyungkyoyuk
• /
• v.11 no.2
• /
• pp.156-176
• /
• 1998

On the border between the Geography subject and the Science subject, much of the content area is found to be interrelated or shared in common due to the characteristics of each subject. This possibly causes a problem of which of the two subjects should treat these overlapping areas with more responsibility and importance, and, as a result, might cause teachers to neglect the areas and result in insufficient treatment of the areas on both sides. In other words, these overlapping area can be overlooked on both subjects. On the other hand, as the science subject treats these areas more deeply and widely in both quantity and quality, the geography subject might lose its original content area to the science subject and accordingly lose its characteristics as an independent subject. To conclude, the following suggestions must be taken into consideration when we develop and organize the environment-related unit in the geography subject. First, the various real cases damaged by pollution, the efforts and steps to avoid being polluted, the inquiry questions and activities to set up the value of the environment conservation, and sufficient assistant materials such as maps, graphs, photos, illustrations, statistics, which will help to realize the environment problem more directly and clearly, must be presented in the textbooks. Second, as the environment education is not just teaching the environmental pollution, the content should be composed for the students to realize the value of the environment and to change their awareness and attitude toward the environment. Third, the environment education cannot be restricted to a certain subject, or it needs to be approached in multi-subject areas. To exercise a effective environment education while we maintain the unique characteristics of the geography subject, a way to link the environment and the region, which is one of the main concepts of geography, should be developed. Finally, textbooks are indispensible materials to teaching-learning, but for more effective teaching the teachers of geography should try to recompose and reorganize the content and to develop newer and more effective teaching material-aids.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.4
• /
• pp.371-378
• /
• 2014

Manual materials handling tasks are the main risk factors for the work-related musculoskeletal disorders. Many assistant tools for manual materials handling are being used in various kind of industries. One of them is a 4-wheeled cart which is widely used in manufacturing factories, hospitals, etc. The major force required to control the 4-wheeled cart is pushing and pulling. There are two types of handles being used for the 4-wheeled cart : vertical type (two vertical handles), and horizontal type (one horizontal handle). This study tried to investigate the pushing forces and subjective discomforts (hand/writst, shoulder, low back, and overall) of the two handle types with different handle height and distance conditions. Twelve healthy male students (mean age = 23.4 years) participated in the experiment. The independent variables were handle angle (horizontal, vertical), handle height (low, medium, high), and handle distance (narrow, medium, wide). The full factorial design was used for the experiment and the maximum pushing forces were measured in 18 different conditions ($2{\times}3{\times}3$). Analysis of variance (ANOVA) procedure was conducted to test the effects of the independent variables on the pushing force and discomfort levels. Handle height and angle were found to be the critical design factors that affect the maximal pushing forces and subjective discomfort. In the middle height, subjects exerted higher pushing forces, and experience lower discomfort levels compared to the high, and low height. There was no statistical influence of the handle distance to the pushing forces and subjective discomfort levels. It was found out that the effects of the handle angle (horizontal and vertical) on both pushing force and subjective discomfort were statistically significant (p < 0.05). The vertical handle revealed higher pushing force and lower discomfort level than the horizontal handle. The reason for that was thought to be the different postures of the hand when grasping the handles. The horizontal handle induced pronaton of the hand and made hand posture more deviated from the neutral position.

• Journal of the Society of Naval Architects of Korea
• /
• v.49 no.5
• /
• pp.391-399
• /
• 2012

This paper presents a method of hull form design for the assistant vessel which is used both as a lighting boat and a fish carrying boat for the fleet of newly formated purse seiner vessels. The optimum hull form parameters are searched by the Sequential Quadratic Programing(SQP) method with the power estimation method of Van Oortmerssen. The prismatic curve is redesigned from that of the reference hull by the Lackenby method. Through the modification of the hull form by using a CAD system, the design procedure is completed. The resistance performances of the reference and the modified hull forms are estimated by using a numerical simulation method. Also, the estimation of seakeeping ability and stability for the modified hull forms are carried out. And then, an optimum hull form is proposed for the designed hull form. Ship model tests for the reference and the designed hull forms are carried out at ship model basin. The results of the experiments show that the effective horse power of the designed hull form is about 22% smaller than that of the reference hull form at design speed. The designed hull form proposed in this study will contribute to the development of the hull form for Korean large purse seiner vessels.

• Journal of Digital Convergence
• /
• v.14 no.8
• /
• pp.223-232
• /
• 2016

This study focuses on the new teaching assistance robot platform and the cloud-based education service model to support the server. In the client area we would like to use the teacher assistant robot in elementary school classrooms to utilize the language education service platform. Emerging IoT technology will be adopted to provide a comfortable classroom environment and various media interfaces. Extensive precedent review and case study have been conducted to identify basic requirements of proposed service platform. Embedded system and technology for image recognition, speech recognition, autonomous movement, display, touch screen, IR sensor, GPS, and temperature-humidity sensor were extensively investigated to complete the service. Key findings of this paper are optimized service platform with cloud server system and possibilities of potential smart classroom with intelligent robot by adopting IoT and BIM technology.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.5
• /
• pp.454-460
• /
• 2020

Artificial intelligence assistants that provide speech recognition operate through cloud-based voice recognition with high accuracy. In cloud-based speech recognition, Wake-Up-Word (WUW) detection plays an important role in activating devices on standby. In this paper, we compare the performance of Convolutional Neural Network (CNN)-based WUW detection models for mobile devices by using Google's speech commands dataset, using the spectrogram and mel-frequency cepstral coefficient features as inputs. The CNN models used in this paper are multi-layer perceptron, general convolutional neural network, VGG16, VGG19, ResNet50, ResNet101, ResNet152, MobileNet. We also propose network that reduces the model size to 1/25 while maintaining the performance of MobileNet is also proposed.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.2 s.40
• /
• pp.145-151
• /
• 2006

In conjunction with the rapid progress of IT(information technology) an increasing amount of data are being generated. The amount of new data is so big and the type of new data generated from clients or sensor devices needed to be in ubiquitous environment is so various that it is hard to manage and control them. Especially data to be occurred in ubiquitous environment are generated through PDA(personal digital assistant) smart phone, mobile device or sensor units etc. Therefore, to manage and control them generated from ubiquitous devices for decision making, we can use data warehouse as an integrated storage. A data warehouse integrates and aggregates data of several different DBMS into one DBMS. Also the updated data from source data have to be effectively propagated to the data warehouse. Therefore, in this paper, we proposed a mode) for an exact and efficient data management methodology in new IT paradigm environment, ubiquitous computing environment, to apply updated data on the warehouse to make decision. We also show brief result compared to conventional methodology.

• Journal of Life Science
• /
• v.18 no.3
• /
• pp.318-322
• /
• 2008

This paper deals with an efficient management and automatic update sub-system for WASPIFA (Web-based Assistant System for Protein-protein Interaction and Function Analysis) system that had been developed in the past and now provides the comprehensive information on protein-protein interaction and protein function. Protein interacting data has increased exponentially, so that it costs enormous time and effort. In other words, it is actually impossible to manually update and manage an analysis system based on protein interacting data. Even though there exists a good analysis system, it could be useless if it was able to be updated timely and managed properly. Unfortunately, in most cases, biologists without professional knowledge on their analysis systems have to cope with a great difficulty in running them. In this respect, the efficient management and automatic update subsystem of protein interacting and its related data has been developed to facilitate experimental biologists as well as bioinformaticians to update and manage the WASPIFA system.