• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 춘계학술대회논문집
• /
• pp.206-209
• /
• 2000

Groove pressing which is analogous to groove rolling in the aspect of deformation mode was designed and influence of the uncommon shear deformation on the development of texture and R value was investigated. Texture developed by the groove pressing were measured as well as predicted. It was found out that the main component in the developed texture was {40。, 45。, 0。} in ODF which was regarded as a rotated Bs component and rarely observed in a plain rolling. The maximum R value was predicted to be 3.8 in 45。 direction which might be attributed to the new component.

• 한국정밀공학회지
• /
• 제23권9호
• /
• pp.164-173
• /
• 2006

The cooling capacity of a micro-heat pipe is mainly governed by the magnitude of capillary pressure induced in the wick structure. For microchannel wicks, a higher capillary pressure is achievable for narrower and deeper channels. In this study, a metallic micro-heat pipe adopting high-aspect-ratio microchannel wicks is fabricated. Micromachining of high-aspect-ratio microchannels is done using the laser-induced wet etching technique in which a focused laser beam irradiates the workpiece placed in a liquid etchant along a desired channel pattern. Because of the direct writing characteristic of the laser-induced wet etching method, no mask is necessary and the fabrication procedure is relatively simple. Deep microchannels of an aspect ratio close to 10 can be readily fabricated with little heat damage of the workpiece. The laser-induced wet etching process for the fabrication of high-aspect-ratio microchannels in 0.5mm thick stainless steel foil is presented in detail. The shape and size variations of microchannels with respect to the process variables, such as laser power, scanning speed, number of scans, and etchant concentration are closely examined. Also, the fabrication of a flat micro-heat pipe based on the high-aspect-ratio microchannels is demonstrated.

• 한국경영과학회지
• /
• 제14권2호
• /
• pp.27-42
• /
• 1989

REA 모델은 EA 모델의 구성요소인 측면을 역할측면, 연산측면, A-PART-OF 측면, IS-A 측면, 속송측면 등의 5개 측면으로 분류한 모델이다. EATPS 는 사용자 인터페이스모듈, 지식생성 모듈, 인스턴스 관리 모듈, 스키마 구조관리 모듈, 무걸성검사 모듈등의 5개 모듈로 구성된 지능적 지식표현 시스템의 REA 모델에 의해 대화식 (interactive) 으로 생성하고 관리한다. 본눈문에서는 EATPS 의 구성과 기능, 지식 정의언어인 EAKDL 의 구조및 대화식 형성, 지식생성 모듈의 구성과 기넝, 클래스 생성 모듈의 기능과 알고리즘, 그리고 상속추론메카니즘을 도입한 생성모듈의 기능 및 알고리즘을 제시하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.175-178
• /
• 2007

COMS (Communication Ocean Meteorological Satellite) is the geostationary satellite being developed by Korea Aerospace Research Institute for multi-mission: experimental communication, ocean monitoring and meteorological observations. The COMS operation is controlled by the on-board software running on the spacecraft central computer. The software is written in ADA language and developed under the software life cycle: Requirement analysis, Design, Implementation, Component test and Integration test. Most functional requirements are tested at component level on a software component testing tool, ATTOL. ATTOL provides a simple way to define the test cases and automates the test program generation, test execution and test analysis. When two or more verified components are put together, the integration test starts to check the non-functional requirements: real-time aspect, performance, the HW/SW compatibility and etc. This paper introduces the COMS on-board software and explains what to test and how to test the on-board software at component level using ATTOL.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.460-463
• /
• 2007

COMS (Communication Ocean Meteorological Satellite) is the geostationary satellite being developed by Korea Aerospace Research Institute for multi-mission: experimental communication, ocean monitoring and meteorological observations. The COMS operation is controlled by the on-board software running on the spacecraft central computer. The software is written in ADA language and developed under the software life cycle: Requirement analysis, Design, Implementation, Component test and Integration test. Most functional requirements are tested at component level on a software component testing tool, ATTOL. ATTOL provides a simple way to define the test cases and automates the test program generation, test execution and test analysis. When two or more verified components are put together, the integration test starts to check the non-functional requirements: real-time aspect, performance, the HW/SW compatibility and etc. This paper introduces the COMS on-board software and explains what to test and how to test the on-board software at component level using ATTOL.

• Steel and Composite Structures
• /
• 제9권4호
• /
• pp.367-380
• /
• 2009

This study focuses on the experimental evaluation of the flexural-torsional performance of high strength thin-walled composite members. A series of tests on composite members with various sectional aspect ratios subjected to eccentric cyclic loads were conducted. Test results show that the composite member's torsional strength could be approximated using a series of linear segments and evaluated using the superposition of the component steel and reinforced concrete responses. It is also validated from the tests that the strength deterioration of members subjected to combined loads is closely related to the aspect ratios of the sections. An interaction expression between the bending and torsion for high strength thin-walled composite members is proposed for engineering practice references.

• 한국융합학회논문지
• /
• 제10권1호
• /
• pp.265-275
• /
• 2019

본 연구는 생태학적 모델을 바탕으로 교육대학원 체육교육전공 학생들이 임용고사 시험에 중도포기하거나 탈락할 수 있는 요소들을 탐색하는데 본 연구의 목적이 있다. 교육대학원 체육교육전공으로 학업중인 재학생 10명을 대상으로 심층면담을 실시하였다. 그 결과 개인요소 측면으로는 학업에 영향을 끼치는 현재 직업을 임용고사를 준비하는데 있어서 어떻게 긍정적으로 활용해야 하는지에 대한 노력이 필요했으며 이를 해결하기 위해 임용고사 준비를 위한 우선순위를 명확하게 결정 할 필요가 있었다. 개인 간 요소 측면으로는 주관적 규범에 의해 부정적 영향을 끼치고 있었으며 이로 인해 개인 맞춤형 멘토링 프로그램이 제공될 필요성이 있었다. 조직 간 요소 측면으로는 학비지원의 미흡과 학업을 위한 부적합한 장소가 강조되었으며 실기 지도 강사 혹은 임용시험 준비반과 같이 실질적 도움이 될 수 있는 지원이 필요했다. 이를 종합하여 본 연구에서는 '임용시험 대비 통합시스템'에 대해 소개하였다.

• 한국컴퓨터정보학회논문지
• /
• 제12권5호
• /
• pp.113-119
• /
• 2007

프레임웍은 구체적이고 확장 가능한 기반 코드를 가지고 있으며, 설계자가 의도하는 여러 디자인 패턴의 집합으로 구성되어 있다. 클래스의 집합이라는 점에서 클래스 라이브러리와 동일하지만 단순한 클래스들의 모임이라기 보다는 어플리케이션을 개발할 수 있는 아키텍쳐를 제공한다는 점에서 차이가 있다. 프레임워크에서는 컴포넌트 라이브러리를 개발하고 관리하는 것이 매우 중요한 요소이다. 본 논문에서는 프레임웍에 기반한 컴포넌트간 메타관계를 정의함으로서 프레임웍에서 사용될 컴포넌트 모델을 설계하고, 모델을 이용한 적용사례를 제시한다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권2호
• /
• pp.695-701
• /
• 2014

The main objective of palliative treatment for cancer patients has been to maintain, if not improve, the quality of life (QoL). There is a lack of local data on satisfaction and QoL among cancer patients receiving palliative treatment in Malaysia. This study covers patients with incurable, progressive cancer disease receiving palliative treatment in a teaching hospital in Kuala Lumpur, comparing the different components of QoL and correlations with patient satisfaction. A cross-sectional survey using Malay validated SF36 QoL and PSQ-18 (Short Form) tools was carried out between July 2012 -January 2013 with 120 cancer patients receiving palliative treatment, recruited into the study after informed consent using convenient sampling. Results showed that highest satisfaction were observed in Communication Aspect ($50.6{\pm}9.07$) and the least in General Satisfaction ($26.4{\pm}5.90$). The Mental Component Summary ($44.9{\pm}6.84$) scored higher when compared with the Physical Component Summary ($42.2{\pm}7.91$). In this study, we found that patient satisfaction was strongly associated with good quality of life among cancer patients from a general satisfaction aspect (r=0.232). A poor significant negative correlation was found in Physical Component (technical quality, r=-0.312). The Mental Component showed there was a poor negative correlation between time spent with doctor (r=-0.192) and accessibility, (r=-0.279). We found that feeling at peace and having a sense of meaning in life were more important to patients than being active or achieving good physical comfort. More studyis needed to investigate patients who score poorly on physical and mental component aspects to understand their needs in order to achieve better cancer care.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 1999년도 추계학술대회 논문집
• /
• pp.7-11
• /
• 1999

Farmer 모델에 의하여 정의된 망관리 시스템 에이전트의 구성모델을 인터페이스 명세모델로의 매핑에 대하여 서술하였다. 인터페이스 명세모델은 컴포넌트 기반 개발 (Component Based Development)에서 구현과 설계를 구분하기위하여 제시하는 모델로서 본 논문에서는 TMN 에이전트 설계의 예로서 설명하였다. 특히 Farmer 모델에서의 측면의 개념을 반영하기 위하여 측면 인터페이스(Aspect Interface)의 개념을 도입하였다.