• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 춘계학술대회 논문집
• /
• pp.62-67
• /
• 2002

While upwelling regions account for only 0.1% of the ocean surface, they yield over 40% of world's fish catch. Thus it is vary important making upwelling region by various methods. This study was performed to find out basic hydrodynamic characteristics (function, stability..,) of artificial upwelling structures. The hydrodynamic characteristics of artificial upwelling structures can be summarized as follows: 1) The falling velocity of blocks was effected size($l_B$) of blocks than incident current velocity( $V_0$). 2) The falling horizontal distance was reduced as induce of stratification parameters and block' size. 3) Generation of artificial upwelling current was effected by size of structures and incident current. When stratification parameters was about 3.0 and relative height(hs/h) of structures was about $0.125{\sim}0.15$, stable artificial upwelling current was generated in the back-side of structures.

• 한국해양공학회지
• /
• 제21권4호
• /
• pp.21-27
• /
• 2007

The multiplication equipment of marine products with artificial upwelling structures could be useful in the fishing grounds near coastal areas. Artificial upwelling structures could move the inorganic nutrients from the bottom to the surface. Artificial upwelling structures have been used to improve the productivity of fishing grounds. Until now, research on artificial upwelling structures has been related to the distribution of the upwelling region, upwelling structures, and the marine environment. However, little work on the optimum design of the rubber-mound artificial upwelling structures has been done to increase the efficiency of drawing up the inorganic nutrients. This study investigated the optimum cross-section of rubber-mound artificial upwelling structures by means of hydraulic experiments. The hydraulic experiments include the falling test of rubber. Based on the results of the falling test, the relationship between the length of the rubber mound and water velocity, and the relationship between the shape of the rubber and the stratification parameter were established. In addition, the effect of the void ratio of various artificial structures on the stratification parameter was studied. From the experiment, it was found that upwelling could be enhanced when the ratio of structure height to water depth was 0.3 and stratification parameter was 3.0. The upwelling was not improved when the void ratio exceeded 0.43. The optimum size of rubber mounds was determined when the incident velocity was influenced by the mean horizontal length rather than size of block.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 추계학술대회 논문집
• /
• pp.277-282
• /
• 2002

This study was performed to find out basic function of artificial upwelling structures. Generation of artificial upwelling current was affected by size of structures, incident current and porosity. when stratification parameters was about 3.0, relative height(hs/h) of structures was $0.125{\sim}0.15$, stable artificial upwelling current was generated in the back-side of structures. when porosity is lower than 50%, the effect of artificial upwelling structure was to be better than little by little.

• 한국환경복원기술학회지
• /
• 제7권2호
• /
• pp.21-35
• /
• 2004

A questionnaire survey from 200 visitors and 100 residents was carried out to establish the management plan of the artificial structures constructed in valley within Bughansan National Park. According to the result of the survey respondents realized that the valley ecosystem could be damaged by artificial structures, but not pollutants of stream water. About 60 % of the respondents felt uncomfortable by artificial cement constructures and about 22 % was concerned about negative effect of valley ecosystem by the constructures. The results categorized by management body, management system and management cost indicate that the artificial constructures should be managed in terms of the safety and conservation of valley ecosystem.

• 한국수산과학회지
• /
• 제39권spc1호
• /
• pp.132-141
• /
• 2006

Artificial structures have been designed as pilot structures to promote the creation and restoration of tidal flats. However, little information is available as to whether such artificial construction affects the macrobenthic community structure. We monitored the variation of the macrobenthic community structure and species composition near natural and artificial structures (seaweed and a timber fence) on the tidal flats near the Iwon Dike, Korea. In total, 137 macrobenthic species were recorded during this study, predominantly crustaceans (47%), polychaetes (18%), and molluscs (27%). Polychaetes comprised over 50% of the total density, followed by gastropods (38%) and crustaceans (11%). Macrobenthic species composition in the artificial and natural areas, was initially similar, but it differed after 7 months. The gastropod Umbonium thomasi, the most dominant species, was present at both sites in the first month after the start of the experiment, but disappeared at the artificial sites within 7 months, suggesting disturbance by the environmental factors. The number of species and diversity (H') varied significantly within sites at the beginning of the experiment, but no difference was observed after 7 months. Multivariate analysis (multidimensional scaling) revealed significant differences in community structure between the artificial and the natural areas from 7 months after the start of the experiment, except from 18 to 21 months. The community structures were mainly influenced by U. thomasi. Community structure at the artificial sites was affected by environmental variables, such as carbon, COD/IL sulfide, loss of ignition, kurtosis and silt, which changed over time. We observed no significant correlations between environmental variables and the dominant species, except in the case of Spio sp. and Macrophthalmus dilatatus, suggesting that the biological interactions and temporary disturbances such as typhoon, as well as the effects of artificial structures may also be important regulating factors in this system.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.290-293
• /
• 2006

From the hydraulic experiment, it was concluded that upwelling could be enhanced when the relative structure height (the ratio of structure height to water depth) was 0.3 and stratification parameter was 3.0. In addition, the optimum size of rubbers was determined that the effect of the mean horizontal length of block was affected incident velocity than size of block. In the numerical experiment, the relation between the shape of rubber and stratification parameter was verified, ana the hydraulic characteristics of 3-D flow field around the artificial structures were investigated. Phenomena of flow field around the artificial upwelling structures corresponded with the results of hydraulic experiment. The position with maximum velocity in artificial upwelling structure was the center of top of its front side and the slip stream occurred at the inside and behind-bottom of artificial upwelling structures. The velocity of slip stream and early amplitude of velocity were higher in the inside than the behind-bottom.

• Ocean and Polar Research
• /
• 제36권4호
• /
• pp.353-365
• /
• 2014

Artificial islands, installations and structures have been used as a major means for ocean development and management since the early 20th century. The International legal regime to regulate the man-made offshore structures also have evolved and the UN Convention on the Law of the Sea (UNCLOS) acts as a basic international instrument for that purpose. Although the Convention includes more detailed provisions on man-made offshore structures, there are some legal issues regarding jurisdiction of coastal State on the man-made offshore structures in the Exclusive Economic Zone (EEZ) or on the Continental shelf. For this reason, this article begins by reviewing the 1958 Convention on the Continental shelf and the UNCLOS by focusing on the EEZ and the Continental shelf regime governing the man-made offshore structures. It next examines some controversial international legal issues that have emerged from the regulation of man-made offshore structures in the EEZ or on the Continental shelf. This is followed by a review of the Korean domestic laws regulating artificial islands, installations and structures in the EEZ or on the continental shelf. Finally, it closes by summarizing the findings of the above examinations, and suggests some recommendations for future works.

• 한국해양공학회지
• /
• 제34권6호
• /
• pp.436-441
• /
• 2020

Wave field changes resulting from artificial coastal structures constructed in coastal zones have emerged as a major cause of beach erosion, among other factors. The rates of erosion along the eastern coast of Korea have varied mainly owing to the construction of various ports and coastal structures; however, impact assessments of these structures on beach erosion have not been appropriately conducted. Thus, in this study, a methodology to assess the impact of erosion owing to the construction of artificial structures has been proposed, for which a parabolic bay shape equation is used in determining the shoreline angle deformation caused by the structures. Assuming that the conditions of sediment or waves have similar values in most coastal areas, a primary variable impacting coastal sediment transport is the deformation of an equilibrium shoreline relative to the existing beach. Therefore, the angle rotation deforming the equilibrium of a shoreline can be the criterion for evaluating beach erosion incurred through the construction of artificial structures. The evaluation criteria are classified into three levels: safety, caution, and danger. If the angle rotation of the equilibrium shoreline is 0.1° or less, the beach distance was considered to be safe in the present study; however, if this angle is 0.35° or higher, the beach distance is considered to be in a state of danger. Furthermore, in this study, the distance affected by beach erosion is calculated in areas of the eastern coast where artificial structures, mainly including ports and power plants, were constructed; thereafter, an impact assessment of the beach erosion around these areas was conducted. Using a proposed methodology, Gungchon Port was evaluated with caution, whereas Donghae Port, Sokcho Port, and Samcheok LNG were evaluated as being in a state of danger.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2006년도 학술발표회 논문집
• /
• pp.141-148
• /
• 2006

This study describes a generation of artificial earthquake wane compatible with seismic design spectrum. In seismic response analysis of building structures, the input ground accelerations have considerable effect on dynamic characteristics of structures. Therefore, it is important to properly select input ground motions for seismic response analysis. In this paper, the artificial earthquake wave are generated according to previously recorded earthquake waves in past earthquake events. The artificial wave have identical phase angles to the recorded earthquake wane, and their overall response spectra are compatible with seismic design spectrum with 5% of critical viscous damping. Each simulated earthquake wave has a identical phase angles to the original recorded ground acceleration, and match to design response spectra in the range of period from 0.02 to 10.0 seconds. It is concluded that the artificial earthquake waves simulated in this paper ate applicable as input ground motions for a seismic response analysis of building structures.

• Structural Engineering and Mechanics
• /
• 제16권5호
• /
• pp.581-595
• /
• 2003

Since the conventional direct approaches are hard to be applied for damage diagnosis of complex large-scale structures, a two-step approach for diagnosing the joint damage of framed structures is presented in this paper by using artificial neural networks. The first step is to judge the damaged areas of a structure, which is divided into several sub-areas, using probabilistic neural networks with natural Frequencies Shift Ratio inputs. The next step is to diagnose the exact damage locations and extents by using the Radial Basis Function (RBF) neural network with the second Element End Strain Mode of the damaged sub-area input. The results of numerical simulation show that the proposed approach could diagnose the joint damage of framed structures induced by earthquake action effectively and has reliable anti-jamming abilities.