• Journal of Ecology and Environment
• /
• 제42권3호
• /
• pp.111-119
• /
• 2018

Background: Juniperus chinensis L. populations are distributed locally on several areas including coastal cliffs which are difficult to access in the central eastern Korea. Wild populations inhabit relatively barren environments such as rocky areas and cliffs, which are very sensitive to even minor environmental disturbances including artificial interventions and natural disturbances, and thus demonstrate great fluctuations in the population size and density. This study aims to analyze the genetic diversity, differentiation, and genetic structure of each population in order to provide useful data required to establish a substantial conservation strategy of J. chinensis. Results: The genetic diversity of J. chinensis at the population level (P = 78.7%, h = 0.282, S.I. = 0.420) was somewhat higher compared with those measured in the same genus, Juniperus. The genetic differentiation degree among nine populations established naturally in central eastern Korea was 11.50% and that among sub-populations within the same area was 5.52%. On the other hand, genetic variation of individuals within the populations was 82.93%. But frequency of the main allele was different among loci. In particular, fixation of allele frequency and occurrence of rare allele in the highly isolated population suggest a likelihood that genetic drift would occur in populations of this plant. As the result of analysis on the genetic structure of nine populations, nearby populations and isolated populations tended to form separate clusters from each other as the hypothetical number of clusters (K) increase. Conclusions: This result implies that if the population size of J. chinensis is reduced due to environmental change and artificial and/or natural disturbances in the future, it could affect negatively on the genetic diversity of the plant species. In order to maintain and conserve genetic diversity of J. chinensis, ecological network, which can help genetic exchange among the local populations, should be prepared, and conservation strategies in situ as well as ex situ are also required with continuous monitoring.

• Reproductive and Developmental Biology
• /
• 제32권2호
• /
• pp.127-133
• /
• 2008

The objective of this study was two folds: to investigate the relationship between paternal identification rate and sperm quality parameters such as motility and sperm chromatin structure assay after heterospermic insemination; to see if mutual complement between tests and development of useful technique to enhance the fertility in artificial insemination. In individual boar's fertilizing ability, 3 high fertility boars showed significantly high fertility (p<0.05) compared to 3 low fertility boars, but there was no difference in litter size between two groups. Sperm motility test in pooled and individual semen using computer assisted sperm analysis (CASA) revealed that no significant difference among boars. The high fertile boar showed tendency of low %Red (High red fluorescence/green+red fluorescence) in sperm chromatin structure assay (SCSA) but paternal identification rate from piglets did not differ after heterospermic insemination. The correlation coefficient between individual or pooled semen function test and farrowing rates were well correlated as follows: %Red with litter size (r= - 0.53, p=0.03); %Red with paternal identification rates (r=-0.51, p=0.03); paternal identification rates with litter size (r=0.57, p=0.02). These results indicate that sperm chromatin structure assay and sperm quality parameter test in pooled semen are useful method to predict and evaluate the fertilizing capacity after heterospermic insemination in boars.

• Smart Structures and Systems
• /
• 제13권3호
• /
• pp.453-471
• /
• 2014

The fault diagnosis of rolling element bearings has drawn considerable research attention in recent years because these fundamental elements frequently suffer failures that could result in unexpected machine breakdowns. Artificial intelligence algorithms such as artificial neural networks (ANNs) and support vector machines (SVMs) have been widely investigated to identify various faults. However, as the useful life of a bearing deteriorates, identifying early bearing faults and evaluating their sizes of development are necessary for timely maintenance actions to prevent accidents. This study proposes a new two-layer structure consisting of support vector regression machines (SVRMs) to recognize bearing fault patterns and track the fault sizes. The statistical parameters used to track the fault evolutions are first extracted to condense original vibration signals into a few compact features. The extracted features are then used to train the proposed two-layer SVRMs structure. Once these parameters of the proposed two-layer SVRMs structure are determined, the features extracted from other vibration signals can be used to predict the unknown bearing health conditions. The effectiveness of the proposed method is validated by experimental datasets collected from a test rig. The results demonstrate that the proposed method is highly accurate in differentiating between fault patterns and determining their fault severities. Further, comparisons are performed to show that the proposed method is better than some existing methods.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 춘계학술대회
• /
• pp.161-162
• /
• 1997

It is very useful to perform the surgery simulation before implanting TAH(Total Artificial Heart} in a patient. The space of chest and the shape of vessels are different from patient to patient. So, It is desirable to customize a TAH design to the anatomy structure of a patient. Several studies are performed to visualize and explain the 3D structure of heart. These studies are performed using 2-dimensional ref or mated images and simple measurement. Anatomy structure of a human heart is not so simple. It is 4dimensional structure ; 3-dimensional plus time, heart beating. 3-dimensional reconstruction schemes of medical images developed for about 10 years are usually categorized into two types of rendering technique ; surface rendering and volume rendering. Volume rendering is preferable in medical image processing field because this technique can be applied without considering the complexity of geometry and change of field of interest. The usable space in the chest of patient can be measured by 3D volume matching of patient trunk and TAH model. This space changes with time. In this research we have developed the 4-dimensional volume match program of patient and TAH model. 3-dimensional rendered set of volumes along time were used to simulate TAH fitting trial. The quantitative measurement from this simulation could be applied to customize TAH design.

• Wind and Structures
• /
• 제32권2호
• /
• pp.127-142
• /
• 2021

Wind load acting on a standalone structure is different from that acting on a similar structure which is surrounded by other structures in close proximity. The presence of other structures in the surrounding can change the wind flow regime around the principal structure and thus causing variation in wind loads compared to a standalone case. This variation on wind loads termed as interference effect depends on several factors like terrain category, geometry of the structure, orientation, wind incident angle, interfering distances etc., In the present study, a three building configuration is considered and the mean pressure coefficients on each face of principle building are determined in presence of two interfering buildings. Generally, wind loads on interfering buildings are determined from wind tunnel experiments. Computational fluid dynamic studies are being increasingly used to determine the wind loads recently. Whereas, wind tunnel tests are very expensive, the CFD simulation requires high computational cost and time. In this scenario, Artificial Neural Network (ANN) technique and Support Vector Regression (SVR) can be explored as alternative tools to study wind loads on structures. The present study uses these data-driven approaches to predict mean pressure coefficients on each face of principle building. Three typical arrangements of three building configuration viz. L shape, V shape and mirror of L shape arrangement are considered with varying interfering distances and wind incidence angles. Mean pressure coefficients (Cp mean) are predicted for 45 degrees wind incidence angle through ANN and SVR. Further, the critical faces of principal building, critical interfering distances and building arrangement which are more prone to wind loads are identified through this study. Among three types of building arrangements considered, a maximum of 3.9 times reduction in Cp mean values are noticed under Case B (V shape) building arrangement with 2.5B interfering distance. Effect of interfering distance and building arrangement on suction pressure on building faces has also been studied. Accordingly, Case C (mirror of L shape) building arrangement at a wind angle of 45º shows less suction pressure. Through this study, it was also observed that the increase of interfering distance may increase the suction pressure for all the cases of building configurations considered.

• 한국토양비료학회지
• /
• 제33권5호
• /
• pp.361-368
• /
• 2000

가축분 퇴비제조시 악취발생을 저감하고 부숙을 촉진시킬수 있는 인공제올라이트의 적정 첨가량을 구명하고자 폭 6m, 길이 70m, 높이 1.5m인 퇴비제조장에서 에스컬레이터식 교반기로 원료 대비 인공제올라이트를 0, 0.5, 1, 3, 5% (V/V)첨가 후 1일 1.2m씩 전진하면서 1차발효 과정중 온도, 수분함량, 단위 시간당 가스발생 농도, 그리고 비료성분함량의 변화를 분석한 결과는 다음과 같다. 가축분 퇴비원료에 인공제올라이트를 첨가하면 무처리 대비 최고온도가 $2{\sim}11^{\circ}C$높았고 후기에도 온도상승효과가 있었으며, 퇴비더미중 함수율도 낮아졌다. 퇴비더미에서 발생되는 암모니아 가스 농도는 퇴비화 개시6일째 최고치를 나타내고 이후 점차 낮아졌으며, 메탄가스는 퇴적 초기에 발생이 많다가 이후 점차 낮아졌다. 인공제올라이트 첨가량이 많을수록 퇴비더미에서 발생되는 암모니아와 메탄가스 발생량이 적었다. 인공제올라이트 처리로 퇴비중 질소함량은 증가되고 유기물 함량은 낮아져 유기물 대비 질소함량비가 30이하로 낮아지는 소요일수가 무처리 대비 7일 이상 단축되었다.

• 대한기계학회논문집B
• /
• 제28권4호
• /
• pp.371-381
• /
• 2004

Numerical simulation of $CO_2$ addition effects to fuel and oxidizer streams on flame structure has been conducted with detailed chemistry in H$_2$-O$_2$ diffusion flames of a counterflow configuration. An artificial species, which displaces added $CO_2$ in the fuel- and oxidizer-sides and has the same thermochemical, transport, and radiation properties to that of added $CO_2$, is introduced to extract pure chemical effects in flame structure. Chemical effects due to thermal dissociation of added $CO_2$ causes the reduction flame temperature in addition to some thermal effects. The reason why flame temperature due to chemical effects is larger in cases of $CO_2$ addition to oxidizer stream is well explained though a defined characteristic strain rate. The produced CO is responsible for the reaction, $CO_2$＋H=CO＋OH and takes its origin from chemical effects due to thermal dissociation. It is also found that the behavior of produced CO mole fraction is closely related to added $CO_2$ mole fraction, maximum H mole fraction and its position, and maximum flame temperature and its position.

• 한국진공학회지
• /
• 제6권S1호
• /
• pp.1-15
• /
• 1997

Titanium oxide films were prepared by ion beam enhanced deposition where the films were synthesized by deposition titianium atoms and simultaneously bombarding with xenon ion beam at an energy of 40 keV in an $O_2$ environ,ent. Structure and composition of titanium oxide films were investigated by X-ray Doffractopm (XRD) Ritjerfprd Backscattering Spectroscopy (RBS) and X-ray Diffraction(XRD) Rutherford Backscattering Spectroscopy (RBS) and X-ray photoelectron spectroscopy (XPS) The results show that thestructure of the prepared films exhibit a rutile phase structure wit high(200) orientation and the O/Ti ratio of the titanium oxide films was about 2:1 XPS anlysis shows that $Ti^{2+},Ti^{3+}\;and\;Ti^{4+}$ chemical states exist on the titanium oxide films. the blood compatibility of the titanium oxide films was studied by measurements of blood clotting time and platelet adhesion. The results show that the anticoagulation property of titanium oxide films improved significantly and better than that of LTI-carbon which was widely used to fabricate artificial heart valve.

• Earthquakes and Structures
• /
• 제10권4호
• /
• pp.757-768
• /
• 2016

In the past decades, effect of near field earthquake on the historical monuments has attracted the attention of researchers. So, many analyses in this regard have been presented. Tunnels as vital arteries play an important role in management after the earthquake crisis. However, digging tunnels and seismic effects of earthquake on the historical monuments have always been a challenge between engineers and historical supporters. So, in a case study, effect of near field earthquake on the historical monument was investigated. For this research, Finite Element Analysis (FEM) in soil environment and soil-structure interaction was used. In Plaxis 2D software, different accelerograms of near field earthquake were applied to the geometric definition. Analysis validations were performed based on the previous numerical studies. Creating a nonlinear relationship with space parameter, time, angular and numerical model outputs was of practical and critical importance. Hence, artificial Neural Network (ANN) was used and two linear layers and Tansig function were considered. Accuracy of the results was approved by the appropriate statistical test. Results of the study showed that buildings near and far from the tunnel had a special seismic behavior. Scattering of seismic waves on the underground tunnels on the adjacent buildings was influenced by their distance from the tunnel. Finally, a static test expressed optimal convergence of neural network and Plaxis.

• 설비공학논문집
• /
• 제21권10호
• /
• pp.537-544
• /
• 2009

On account of the technological development, intelligent building is on increasing where the artificial regulation on indoor environment is possible, thence the concern about those facilities such as water-supply facility, water-heater and drainage facility has becomes higher. However, due to diversification and complicated system of the facility-equipments, the noise generating from such facility equipment is gradually becoming a problem, and since especially equipment noises arising at the machine room frequently infringe into the resident's pleasant living environment with the complex types of an air-borne sound and a structure-borne sound, it is becoming the civil complaint. On such viewpoint, this Study ever observed the characteristics of noise generating from various facility-equipments in the building, and intended to evaluate the facility-noises by use of the valuation index such as PSIL, N, NC, NR. As result of, the facilities noise which happens in the machine room makes normal conversation very difficult due to high sound pressure level. Based on such data, this study is willing to present it as an essential material for establishment an efficient measure against the facility-noises arising at machine room hereafter.