• Korean Journal of Food Science and Technology
• /
• v.5 no.4
• /
• pp.201-205
• /
• 1973

In order to eliminate aflatoxin in foodstuffs, the effects of the treatment by various pH conditions, acid and alkali, and salt on each temperature and time were studied in this experiment and the results were as follows: 1) In the low pH, aflatoxins were much more destroyed than high pH. The destruction of aflatoxins was significantly increased by heat in the same pH levels. 2) BY the treatment of 1.5 and 10% of sodium hydroxide and ammonia, aflatoxins were completely eliminated, but $40{\sim}80%$ of aflatoxins were eliminated by the treatment of 1.5 and 10% of acetic acid, hydrochloric acid and sulfuric acid. 3) By the treatment of aflatoxin in bile acid and artificial gastric juice, aflatoxins were completly eliminated and 75% respectively. 4) By the boiling $(100^{\circ}C)$ for 30 minutes in salt solution, $39{\sim}55%$ of aflatoxins was eliminated and no variation was observed as the concentration.

• Korean Journal of Soil Science and Fertilizer
• /
• v.41 no.3
• /
• pp.177-183
• /
• 2008

Sodium is known to reduce a plant growth and yields. However, the relationships between physiological response of seedling and salinity stress caused by growing media are not well understood yet. We conducted experiments to investigate change of some parameters including Na, EC, moisture content in media under different air temperature ($15^{\circ}C$, $25^{\circ}C$), and the response of fruit-vegetables such as cucumber, oriental melon on saline conditions originated from horticultural substrate. Volumetric moisture content of media at $15^{\circ}C$ was 70%, but at $25^{\circ}C$ was decreased by 45% within 22 hrs, showing below optimal matric potential, approximately. During reaction time, the increase of Na concentration was significantly greater in saline substrate than in control. The decrease rate of Na concentration according to supplying irrigation water was higher in saline substrate than in control. $CO_2$ assimilation rate and transpiration rate of Korea melon grown in low temperature were decreased with a Na/cation ratio in hydroponic solution. Water saturation deficit was also increased significantly at $15^{\circ}C$ as compare to $25^{\circ}C$. Saline stress during nursery stage induced a reduction of seedling quality, growth and cucumber yield. The results suggest that the relationship between uncontrolled Na uptake of seedling from saline substrate and meteological condition is responsible for saline stress.

• Parasites, Hosts and Diseases
• /
• v.35 no.3
• /
• pp.165-170
• /
• 1997

The present study was performed to analyze the infection status of trematode metacercariae in fishes caught from Chunamchosuchi (pond) located in Uichang-gun. Kyongsangnam-do. A total of 130 freshwater fish of 5 species was collected by a fish net and fish traps from November, 1995 to May, 1996. They were examined under a stereomicroscope after artificial digestion with pepsin-HCI solution. A total of 8 species or metacercaria, i. e. Clonorchis sinensis, Echinochnsnw japonicas, Cvathocotwle orientalis, Diplostomun sp.. Metorchis orientalis. Holostephcnw nipponicw, Exorchis oviformis and unidentified echinostome, was detected from them. The metacercariae of C. sinenesis were found in 8/20 (40.0%) Accnthorhodeus Qsmwsi, 20/20 (100%) Cutter breuiccudc, 31/45 (68.9) Cultriculus eigenmanni and 21/25 (84.0%) Pseunorasborc pronga, and the average number of metacercariae detected in each fish species were 1.9, 31.7. I5.3, and 73.0. From the above results, it was confirmed that fresh-water fishes from Chunamchosuchi (pond) were highly infected with metacercariae of avian trematode, i.e. C. orientolis, H. nipponicus. M. oui,entnlis, E. jcponicw and Diplostonum sp., and 4 species of fish. P. parvc, C. breuiccudn, C. eigenmnnni and A. asmussi, were infected with metacaecariae of C. sinensis.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.102-102
• /
• 2018

Electronic industry had required the finer size and the higher performance of the device. Therefore, 3-D die stacking technology such as TSV (through silicon via) and micro-bump had been used. Moreover, by the development of the 3-D die stacking technology, 3-D structure such as chip to chip (c2c) and chip to wafer (c2w) had become practicable. These technologies led to the appearance of HBM (high bandwidth memory). HBM was type of the memory, which is composed of several stacked layers of the memory chips. Each memory chips were connected by TSV and micro-bump. Thus, HBM had lower RC delay and higher performance of data processing than the conventional memory. Moreover, due to the development of the IT industry such as, AI (artificial intelligence), IOT (internet of things), and VR (virtual reality), the lower pitch size and the higher density were required to micro-electronics. Particularly, to obtain the fine pitch, some of the method such as copper pillar, nickel diffusion barrier, and tin-silver or tin-silver-copper based bump had been utillized. TCB (thermal compression bonding) and reflow process (thermal aging) were conventional method to bond between tin-silver or tin-silver-copper caps in the temperature range of 200 to 300 degrees. However, because of tin overflow which caused by higher operating temperature than melting point of Tin ($232^{\circ}C$), there would be the danger of bump bridge failure in fine-pitch bonding. Furthermore, regulating the phase of IMC (intermetallic compound) which was located between nickel diffusion barrier and bump, had a lot of problems. For example, an excess of kirkendall void which provides site of brittle fracture occurs at IMC layer after reflow process. The essential solution to reduce the difficulty of bump bonding process is copper to copper direct bonding below $300^{\circ}C$. In this study, in order to improve the problem of bump bonding process, copper to copper direct bonding was performed below $300^{\circ}C$. The driving force of bonding was the self-annealing properties of electrodeposited Cu with high defect density. The self-annealing property originated in high defect density and non-equilibrium grain boundaries at the triple junction. The electrodeposited Cu at high current density and low bath temperature was fabricated by electroplating on copper deposited silicon wafer. The copper-copper bonding experiments was conducted using thermal pressing machine. The condition of investigation such as thermal parameter and pressure parameter were varied to acquire proper bonded specimens. The bonded interface was characterized by SEM (scanning electron microscope) and OM (optical microscope). The density of grain boundary and defects were examined by TEM (transmission electron microscopy).

• Journal of Biomedical Engineering Research
• /
• v.20 no.2
• /
• pp.221-230
• /
• 1999

A new technique for the preparation of porous polyurethane vascular prostheses was investigated. Synthetic vascular grafts with porous wall have been widely proposed, claiming that strength, suture retention, kink resistance, and other handling properties are improved over those with nonporous solid wall. Related to these facts, the control of pores and compliance match have been very important and interesting issues. Two kinds of polymer sheets were compared. One was the porous PU-sheet made at room temerature by the solvent/non-solvent exchange. And the other was the porous PU-sheet fabricated by thermal phase transition and solvent/non-solvent exchange in the thermal controlled bath. According to the result of the above experiments, polyurethane solution was injected into a mold designed for U-type graft. After freezing at low temperature, solvent was dissolved out with alcohol at < $0^{\circ}C$ and water at room temperature to form porous vessels. The average pore size and pore occupation were easily changed by changing polyurethane concentration and freezing rate. This technique can give a proper pore size for tissue ingrowth, and suitable compliances for matching with arteries and veins. In addition, the fabrication of more complicated shaped vessels such as the U-type vascular grafts is easily controlled by using a mold. This method might give a desired compliact graft for artificial implantaion with the commercially available medical polymers.

• Journal of Life Science
• /
• v.25 no.5
• /
• pp.533-538
• /
• 2015

Four sites and one site were used to analyze fish diversity at the water systems of the Sineun reservoir and the Jeonchon reservoir, respectively. The field experiments were conducted to test the density dependence that could lead to population regulation by artificial inferences and environmental changes. We examined the effects of environmental factors on fish densities using SMATR freeware. It was estimated to be reduced to the density effect at four sites in 2012. Shannon-Weaver indices of the diversity (H’) of the Sineun reservoir were similar to those of the Jeonchon reservoir. Species diversity was in a range of 0.645 to 2.105. The H’ value of the upper region was higher than those of middle and low regions were, and values of richness were lower in downstream than upstream. Using the maximum likelihood solution for the removal estimators of two low regions of the river stations, the estimated migration probabilities from the resident fish to the migrated fish for five species (Cyprinus cuvieri, Carassius auratus, Pseudorasbora parva, Misgurnus mizolepis, and Oryzias latipes) had a mean of 0.623. Especially, migration probabilities from the Jeonchon reservoir to the Sineun reservoir for five species were high (a mean of 0.681). The period of migration was suggested to be about one month because of short geographical distances (50 m). We found no significant difference between the three categories in the distribution of the other four species, indicating the species probability was similar among stations.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.38 no.3
• /
• pp.143-147
• /
• 2005

Relationship between structure and biological activity was performed using the five substance P-related peptides (SPRPs) [mammalian-SP (M-SP), cod-SP (C-SP), trout-SP (T-SP), lungfish-SP (L-SP) and Ranakinin] and four SP analogs [[$His^5$]-SP (5H-SP), [$Gly^5$]-SP (5G-SP), ($Ile^8$)-SP (8I-SP) and ($Trp^8$)-Ranakinin (8W-Ranakinin)]. The circular dichroism (CD) spectra showed that all of the peptides took an unordered structure in buffer solution and artificial liposomes. However, 8W-Ranakinin undergoes conformational changes by being transferred into neutral and acidic liposomes from an unordered structure to more ordered structure. The arterial relaxing effect of the peptides was also studied with guinea-pig aorta (GPA), As a result of the studies, L-SP was about 14-fold more potant than M-SP. The order of potency compared to $EC_{50}$ value was $L-SP{\gg}M-SP>5G-SP{\ge}8I-SP>5H-SP>T-SP$, C-SP, Ranakinin, 8W-Ranakinin.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.6 no.1_2
• /
• pp.76-80
• /
• 1973

Cyclina sinensis is an edible bivalve inhabiting wide tidal flats which are exposed to the air at ebb tide along the western coast of Korea. Over the period of June to September 1971, some specimens from a tidal flat near Inchon were submerged in sea water with various concentrations of ammonium hydroxide added and careful observations were made on their fertilization, early development, and metamorphosis of the larvae. The highest rate of fertilization was demonstrated by individuals treated with 1/1000 normal solution of ammonium hydroxide and their fertilized eggs followed normal development, i.e., two cell stage 1.5 hours after fertilization, blastular stage after 4 hours, and trochophore stage after 6 hours. Within 24 hrs after fertilization C. sinensis larvae have acquired the form of early straight-hinge veliger with the mean prodissoconch I with the length of $110\mu$. It takes seven days to get the umbo stage with the mean shell length of $190\mu$ and twenty days to get the morphosing stage with the mean shell length of $260\mu$. The larvae were cultured to the metamorphosing stage with the shell length of $270\mu$ in the laboratory condition.

• Journal of Aquaculture
• /
• v.16 no.3
• /
• pp.129-134
• /
• 2003

Spawning induction and early growth of the sea urchin, Strongylocentrotus intermedius were studied with the purpose of artificial seedling production. Gonadosomatic index(GSI) of the sea urchin showed the highest value in October, and rapidly decreased in December. It means that October and November is the peak of spawning season of the sea urchin in the latitude. Spawning induction by injection of potassium chloride solution in October has showed 44.0~100.0% reaction rate, and were produced 6,300$\times$10$^4$ eggs. Spawned eggs have shown the fertilization rate of 92.3~98.2% and the hatching rate of 78.2~87.0%. The metamorphosis of larvae after hatching in the seawater temperature of 13.7~17.1$^{\circ}C$ resulted in early eight-armed larvae in 13 days and late eight-armed larvae in 20 days. The collection of progenies was possible in 24~25 days after hatching and collection rate was 18.5~26.1% (mean 22.3%). Test diameter immediately after collection had a mean 350 ${\mu}{\textrm}{m}$. Survival rate and test diameter of juvenile sea urchin after collection were 58.5%, 1.32 mm in 30 days, 27.7%, 3.82 mm in 92 days and 15.6%, 11.70 mm in 181 days, respectively.

• Clinical and Experimental Reproductive Medicine
• /
• v.25 no.2
• /
• pp.123-128
• /
• 1998

Implantation rates remain low following human in vitro fertilization (IVF). Suboptimal culture conditions may limit the ability of embryos to hatch as blastocysts, and artificial opening of the zona pellucida has been proposed as a means to promote subsequent hatching (assisted hatching). In this study, assisted hatching (AH) by zona drilling using acidic Tyrode's solution was performed in 320 patients, due to their age of more than 38 years (group A), the thick zona pellucida (group Z; $ZP\geq0.18{\mu}m$), and failures in implantation more than 3 times in previous IVF-ET trial (group P). This study was designed firstly, to study the effects of AH on the outcomes of IVF-ET according to the indications and secondly, to verify the appropriate application of AH. The results were as follows; 1. There was no difference in pregnancy rate between AH group (26.6%) and non-AH group (26.5%). 2. Assisted hatching (AH) showed significantly higher pregnancy rate of the patients with thick zona pellucid a than those of the patients with age factor and with the history of repeated implantation failure. But in the patients with age factor only, AH resulted in higher pregnancy rate. 3. Interestingly, the patients with complex factors including zona factor (Z: 33.9%; ZA: 30.4%; ZP: 31.6%; ZAP: 21.4%) showed higher pregnancy rates than other complex factors excluding zona factor (A: 24.4%, P: 0%; AP: 10.8%). From these results, AH is more helpful to the patients with thick zona pellucida rather than patients with older age and/or previous repeated implantation failure.