• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.07a
• /
• pp.483-483
• /
• 2004

• Archives of Plastic Surgery
• /
• v.37 no.6
• /
• pp.788-794
• /
• 2010

Purpose: The fingertip is the most commonly injured part of the hand and its injury frequently results in avulsion or crushing of a segment of the nail bed and fracture of the distal phalangeal bone. Restoration of a flat and smooth nail bed is essential for regrowth of a normal nail, which is important not only for cosmetic reasons but also for tactile capability of the fingertip. It is also anatomical reduction of the distal phalanx to promote patient's cosmetics and prevent nail bed deformity. Absence or no replacement of the nail plate results in obliterated proximal skin fold. When the avulsed nail plate cannot be returned to its anatomic position or when it is absent, we use a synthetic material for splinting the nail bed and alternative reductional method for distal phalangeal bone fracture, especially, instead of hardwares. Methods: From January of 2006 to June of 2009, a total of ten patients and fourteen fingers with crushing or avulsion injuries of the fingertip underwent using the artificial nails for finger splint. We shaped artificial nails into the appropriate sizes for use as fingernail plates. We placed them under the proximal skin fold and sutured to the fold proximally and to the lateral and medial edges of the nail bed or to the distal fingertip. Our splints were as hard as K-wire and other fixation methods and more similar to anatomic nail plates. Artificial nails were kept in place for at least 3 weeks. Results: No artificial nail related complication was noted in any of the ten cases. No other nail fold or nail bed complications were observed, except for minor distal nail deformity because of trauma. Conclusion: In conclusion, in order to secure the nail bed after injury and reduce the distal phalangeal bone fracture, preparing a nail bed splint from a artificial commercial nail is a cheap and effective method, especially, for crushed or avulsion injuries of the fingertip.

• Korean Journal of Remote Sensing
• /
• v.34 no.6_3
• /
• pp.1399-1414
• /
• 2018

Natural forests are un-manned forests where the artificial forces of people are not applied to the formation of forests. On the other hand, artificial forests are managed by people for their own purposes such as producing wood, preventing natural disasters, and protecting wind. The artificial forests enable us to enhance economical benefits of producing more wood per unit area because it is well-maintained with the purpose of the production of wood. The distinction surveys have been performed due to different management methods according to forests. The distinction survey between natural forests and artificial forests is traditionally performed via airborne remote sensing or in-situ surveys. In this study, we suggest a classification method of forest types using satellite imagery to reduce the time and cost of in-situ surveying. A classification map of natural forest and artificial forest were generated using KOMPSAT-3, 3A, 5 data by employing artificial neural network (ANN). And in order to validate the accuracy of classification, we utilized reference data from 1/5,000 stock map. As a result of the study on the classification of natural forest and plantation forest using artificial neural network, the overall accuracy of classification of learning result is 77.03% when compared with 1/5,000 stock map. It was confirmed that the acquisition time of the image and other factors such as needleleaf trees and broadleaf trees affect the distinction between artificial and natural forests using artificial neural networks.

• The Korean Journal of Ecology
• /
• v.24 no.6
• /
• pp.385-394
• /
• 2001

An attempt to clarify the landscape structure of urban areas was carried out in the greenbelt around Seoul, Korea's metropolis. By means of aerial photographs and a field survey, a vegetation map including land-use pattern was made. Landscape structure was described by analyzing this vegetation map and the results of phytosociological survey. Landscape element types identified were (1) secondary forest, (2) plantation, (3) cultivated field, (4) urbanized area, (5) graveyard, and (6) bare rock. Vegetation units, resulting from the phytosociological analysis, included Quercus mongolica, Q. variabilis, Q. acutissima, Pinus densiflora, Q. aliena, and Alnus japonica communities. Plantations were composed of Robinia pseudoacacia, Populus tomentiglandulosa, P. rigida, Larix leptolepis, P. koraiensis, and Castanea crenata stands. Patches near to human settlements in the lower zones of the mountains were fragmented and small but they became larger towards the higher mountain zones. On the other hand, the number of patches was fewer and their size was larger in Mt. Cheonggye more distant from the principal residential area, larger in size, and higher in elevation compared with the other 2 mountains, Mt. Daemo and Mt. Acha. Floristic composition of Mongolian oak(Q. mongolica) stand distributing in the upper part of each mountain, in which artificial interference is rare, showed a difference among those study areas different in parent rock and disturbance regime. But that of black locust(R. pseudoacacia) stand located in lowland of mountainous area, in which artificial interference is frequent was similar to each other. As the results of analyses on the frequency distribution of diameter classes of major species, dominant landscape elements, Mongolian oak forest showed different responses depending on artificial interference as continuous maintenance and retrogressive succession in the sites far from and near to the residential areas, respectively. On the other hand, black locust stands showed a probability to be restore to the native oak forest through progressive succession.

• Journal of Periodontal and Implant Science
• /
• v.30 no.2
• /
• pp.443-455
• /
• 2000

The aim of periodontal therapy is a removal of a bacterial plaque butthe instrumentation for plaque control has two nature : removal of a bacterial plaque and increase of surface roughness. Complication of instrumentation is enable to damage to the root surface and artificial crown. Therefore this study was conducted to evaluate the effects of repeated instrumentation on the marginal portion of artificial crown. Fifteen proximal surfaces of ten extracted periodontally diseased maxillary first molars were used. The finish line was placed on the root surface, and then the crown was casted and cemented in usual manner. Three kinds of instruments: hand curet, ultrasonic scaler, and ultrasonic curet were used. After instrumentation, final polishing was done with rubber cup and pumice. And surface changes were evaluated by stereomicroscope and scannig probe microscope. Roughness was increased after instrumentation in all groups, and was decreased after polishing except ultrasonic scaler group. Roughness in the ultrasonic scaler group was lower than others, and roughness after polishing in the hand curet group was lower than others. These results indicate that polishing procedure is recommended, because periodontalinstruments increase the surface roughness and induce the irreversible damage to the marginal portion.

• Asian Journal of Turfgrass Science
• /
• v.18 no.1
• /
• pp.29-36
• /
• 2004

The efficient refinement of seed is required to reduce the cost and labor input in artificial propagation of wild plant. This study was carried out to develop methods for collecting and refining tiny seeds from wild plants. For obtaining Phragmites communis seeds, the inflorescence was cut into small fragments using a Straw Cutter and subsequently detached pappus hairs from seed coat by Hammer Mill. The primary refined seeds were passed 1.0 mm sieve. The screened seeds were subjected to Seed Blower with wind speed of 0.25 mㆍsec-1 to collected intact and well-ripen seeds. The seeds of Imperata cylindrica were refined as follows. Inflorescences were cut using a Straw Cutter first. The pappus was removed from cut fragments using a Hammer Mill and subsequently subjected to Seed Scarifier at 500rpm for 60 sec. for further separation. The separated seeds were passed 1.0 mm screen and collected after blowing with Seed Blower of wind speed of 0.15 mㆍsec-1. When the amount of seed was too little to refine with Seed Scarifier and Blower, the procedure was slightly modified from the procedure described above. The crude seed mixture obtained from Hammer Mill step was hand-refined roughly and then immersed into cone. (95%) sulfuric acid for 2 min. and collected floating portion after dilution of sulfuric acid solution 100 times with tap water. The collected seeds were dried and passed 0.149 mm sieve. During seed refining process using mechanical or sulfuric acid treatments, a small portion of damaged seed were evolved, however, the amount was not noticeable as compared to the total amount of collected seeds. Because the germination percentages between hand-refined seeds and seeds refined by above methods were not statistically different, the developed procedures for refining tiny seed of wild plants are helpful to reduce the cost and labor input in artificial propagation of two species.

• Journal of The Korean Society of Integrative Medicine
• /
• v.11 no.2
• /
• pp.1-13
• /
• 2023

Purpose : Along with the rapid development of digital technology, the application of digital healthcare in the medical field is also increasing. According to many experts, increasing the amount of exercise and physical activity is a helpful way to prevent and manage physical problems in modern society. However, a lack of exercise, which is of the lifestyle of modern people, leads to the development of various diseases. This study aimed to examine the effects of digital exercise intervention using artificial intelligence (AI) on the physical abilities of adults whether digital exercise intervention can be a reliable and effective therapeutic option for musculoskeletal disorders in real-world clinical settings. Methods : In this study, exercise was conducted using a digital application to investigate the effects of an AI-based digital exercise intervention on the physical abilities of adults. A total of 13 adults were evaluated, and their physical abilities before and after the exercise intervention were compared. Hand-grip strength, functional leg muscle strength, dynamic balance, and quadriceps muscle strength were assessed. Exercise was performed using a digital application and in a non-face-to-face manner. AI identified the exercise status of each participant and adjusted the exercise difficulty level accordingly. The exercised daily for 4 weeks. Results : A total of 12 participants were analyzed for the final results. Significant improvements were observed in hand-grip strength, functional leg muscle strength (evaluated using the stand-up test), dynamic balance, and straight-gait ability (p<.05), indicating an increase in the overall muscular strength and physical function of the participants. Conclusions : Digital exercise intervention using AI is effective in improving physical abilities related to musculoskeletal function. It can be useful in clinical practice as an effective treatment option for patients with musculoskeletal disorders or muscle weakness.

• Journal of Fashion Business
• /
• v.21 no.4
• /
• pp.144-158
• /
• 2017

Fur garment has long been the conventional symbol for luxury, or conspicuous consumption. However, as fashion items began to diversify as part of overall fashion trend, fur items are now more about individual taste and style than just lavishness. Synthetic fur is especially emerging as a new promising fashion material, with a touch almost like natural fur at an affordable price. Along with the emergence of 'Vegan Fashion' trend, synthetic fur is establishing itself as a popular fashion textile. This study is an attempt to investigate subjective evaluation and physical properties of natural and synthetic furs, whose results will further serve as basic data in developing synthetic fur materials. Sensory and emotional evaluations are carried out on natural and artificial furs. For analysis, factors such as weight, thickness, air permeability, gloss and compressibility were surveyed to observe how they influence the physical properties. According to the subjective evaluation, natural and artificial fur samples do not differ in conspicuous ways in appearance. Experiments on physical properties, specifically warm/cool touch experiment, show that natural fur has a slightly higher warm sensation than artificial fur. Luster analysis by using a microscope revealed that there are subtle qualitative differences between natural and artificial fur. During the subjective evaluation, subjects found it hard to state distinct quantitative differences in luster. A survey as a means of assessing qualitative differences in gloss seems to be necessary to complement the evaluation. Results from this study will potentially serve as resources for diversification of fashion product designs using synthetic fur.

• Korean Journal of Radiology
• /
• v.22 no.11
• /
• pp.1764-1776
• /
• 2021

Objective: This study aimed to validate a deep learning-based fully automatic calcium scoring (coronary artery calcium [CAC]_auto) system using previously published cardiac computed tomography (CT) cohort data with the manually segmented coronary calcium scoring (CAC_hand) system as the reference standard. Materials and Methods: We developed the CAC_auto system using 100 co-registered, non-enhanced and contrast-enhanced CT scans. For the validation of the CAC_auto system, three previously published CT cohorts (n = 2985) were chosen to represent different clinical scenarios (i.e., 2647 asymptomatic, 220 symptomatic, 118 valve disease) and four CT models. The performance of the CAC_auto system in detecting coronary calcium was determined. The reliability of the system in measuring the Agatston score as compared with CAC_hand was also evaluated per vessel and per patient using intraclass correlation coefficients (ICCs) and Bland-Altman analysis. The agreement between CAC_auto and CAC_hand based on the cardiovascular risk stratification categories (Agatston score: 0, 1-10, 11-100, 101-400, > 400) was evaluated. Results: In 2985 patients, 6218 coronary calcium lesions were identified using CAC_hand. The per-lesion sensitivity and false-positive rate of the CAC_auto system in detecting coronary calcium were 93.3% (5800 of 6218) and 0.11 false-positive lesions per patient, respectively. The CAC_auto system, in measuring the Agatston score, yielded ICCs of 0.99 for all the vessels (left main 0.91, left anterior descending 0.99, left circumflex 0.96, right coronary 0.99). The limits of agreement between CAC_auto and CAC_hand were 1.6 ± 52.2. The linearly weighted kappa value for the Agatston score categorization was 0.94. The main causes of false-positive results were image noise (29.1%, 97/333 lesions), aortic wall calcification (25.5%, 85/333 lesions), and pericardial calcification (24.3%, 81/333 lesions). Conclusion: The atlas-based CAC_auto empowered by deep learning provided accurate calcium score measurement as compared with manual method and risk category classification, which could potentially streamline CAC imaging workflows.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.2
• /
• pp.96-103
• /
• 2009

The biodegradability in water of the artificial baits for blue crab pots which were made of intestines of mackerel, tuna and grinded krill were studied. The biodegradability of artificial bait was evaluated with the effective capacity of 10L water tank which was made of acryl pipe at the velocity of 1m/d and hydraulic retention time of 12 hours. For the 23 days operation time, all artificial baits were degraded fast at the early stage of operation time and stabilized within 5 days after start up. The rates of biodegradation were different depending on the raw materials of artificial baits. In terms of degradation rate of organic matter which can be expressed as COD, artificial bait made of tunas intestine showed the fastest degradation rate. On the other hand, in terms of degradation rate of nitrogenous matter which can be expressed as ammonia nitrogen, artificial bait made of mackerels intestine showed the fastest degradation rate. In order to evaluate the effect of artificial bait on marine ecosystem, seawater qualities including SS, COD, DO, nitrogen, phosphorus were determined depending on depth and location during 2 days test operation period. It is apparent that the effect of artificial bait on seawater quality was negligible when comparing seawater quality of test operation area with control area.