• Journal of the Korean Wood Science and Technology
• /
• v.35 no.5
• /
• pp.87-92
• /
• 2007

For the safe disposal of the end used CCA treated wood, the biological method was studied. Aspergillus niger has been known to be grown on the fresh wood surfaces even on the CCA treated wood surface. Therefore, in this study we estimated the removal efficacy of heavy metals from CCA treated wood by A. niger. The selected fungi, A. niger adsorbed the heavy metals from CCA solution. A. niger removed 95% of arsenic, 55% of copper, and 23% of chromium. From these results, A. niger appeared to be useful for the removal of chromium, copper, and arsenic from the end used CCA-treated wood and the use of A. niger-alginate could be effective.

• Environmental Engineering Research
• /
• v.21 no.3
• /
• pp.304-310
• /
• 2016

Removal of arsenic (As) from soil aggregates with particle sizes of > 2.0, 2.0-0.25, 0.25-0.053, < 0.053 mm by soil washing of $KH_2PO_4$ and the kinetics of As releasing from soil aggregates were investigated. Effects of $KH_2PO_4$ concentration, ratio of liquid/soil and washing duration on the removal were fully explored. The results showed that the high As removal was obtained in > 2 mm aggregates (48.56%) and < 0.053 mm aggregates (42.88%) under the optimum condition ($KH_2PO_4$ concentration of 0.1 mol/L, and liquid/soil ratio (10 mL/g) for 360 min). 62.82% of As was extracted from aggregates with size less than 0.25 mm. Only 11.88% was contributed by the large aggregates (> 2.0mm). Using $KH_2PO_4$ washing, it was also found that extracted As is mainly in form of either specifically sorbed As or As associated with oxides of Fe and Al. Elovich model can describe the removal process of As more precisely than Two-constant kinetic models. The optimum washing conditions and removal process is also applied to bulk soil. This technique in this study is reliable, cost-effective and offers a great potential for practical application in soil remediation.

• Journal of Soil and Groundwater Environment
• /
• v.18 no.7
• /
• pp.1-11
• /
• 2013

The actively soil pollution by the toxic heavy-metals like the arsenic, cadmium, lead due to the industrialization and economic activity. The uses the electrokinetic remediation of contaminated soil has many researches against the fine soil having a small size in the on going. However, it is the actual condition which the research result that is not effective due to the low surface charge of the particle and high permeability shows in the electrokinetic remediation in comparison with the fine soil in the case of the sandy soil in which the particle size is large. In this research, the electrokinetic remediation and ultrasonic wave fetch strategy is compound applied against the sandy soil polluted by the arsenic, cadmium, and lead removal efficiency of the sandy soil through the comparison with the existing electrokinetic remediation tries to be evaluated. First of all, desorption of contaminants in soil by ultrasonic extraction in the Pre-Test conducted to see desorption effective 5~15%. After that, By conducted Batch-Test results frequency output century 200 Khz, reaction time 30 min, contaminated soil used in experiment was 500 g. Removal efficiency of arsenic, cadmium, lead are 25.55%, 8.01%, 34.90%. But, As, Cd, Pb remediation efficiency less than 1% in EK1(control group).

• Environmental Engineering Research
• /
• v.19 no.2
• /
• pp.145-149
• /
• 2014

Arsenic (As) is one of the heavy metals which causes acute bio-toxicity even at low concentration and has disastrous effect on environment. In some countries, As contamination has become alarming and increasing day by day as consequences of unsustainable management practices. Many existing physical, chemical and biological processes for As removal from water system are not feasible due to techno-economic limitations. The present study highlights the scope of biological strategy for As removal through phytoextraction. Arsenic uptake and accumulation in the biomass of three plant species and their As tolerance abilities have been investigated to develop an efficient phytoextraction system in combination of these plant species. Three non-crop plant species, Pteris vittata; Mimosa pudica, and Eichhornia crassipus were treated with 0-200 mg/L As in liquid nutrient solution for 14 days. P. vittata accumulated total 9,082.2 mg (8,223 mg in fronds) As/kg biomass and Eichhornia total 6,969 mg (4,517 mg in fronds)/kg biomass at 200 mg/L As concentration, respectively. Bioaccumulation factor (BF) and translocation factor (TF) were estimated to differentiate between excluders, accumulators and accumulation in above ground biomass. Pteris and Eichhornia have highest BF (67 and 17) and TF (64 and 3), respectively. In contrast, Mimosa accumulated up to 174 mg As/kg plant biomass which is low in comparison with other two plants, and both BF and TF were ${\leq}1$. This study reveals that Pteris and Eichhornia are As hyperaccumulator, and potential candidates for As removal from water system.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2001.11a
• /
• pp.139-142
• /
• 2001

• Journal of Soil and Groundwater Environment
• /
• v.16 no.2
• /
• pp.6-11
• /
• 2011

In this report, we provide experimental evidence that heavy metal ions could be removed using Pachymeniopsis sp., particularly soluble arsenic in leachate from soil contaminated by arsenic. We performed pilot scale of soil washing process based on our results. The adsorption of arsenic by Pachymeniopsis sp. indicated that it could be described with the Langmuir Model and the maximum adsorption capacity increased with decreasing pH (pH 3: 102.48 mg/g, pH 5: 98.32 mg/g, pH 7: 57.70 mg/g, pH 9: 43.34 mg/g) and increasing temperature (10$^{\circ}C$ : 60.38 mg/g, 20$^{\circ}C$ : 76.39 mg/g, 30$^{\circ}C$ : 112.12 mg/g). Our results revealed that soluble arsenic in leachate was removed from 24.03 mg/L to 0.6 ${\pm}$ 0.1 mg/L by Pachymeniopsis sp. for 48hours on pilot scale of soil washing process.

• Journal of Korean Society on Water Environment
• /
• v.31 no.2
• /
• pp.209-215
• /
• 2015

The purpose of this study is to evaluate the characteristic of the iron oxide carrier for removing arsenic contained in the groundwater. 4 types of iron oxide carrier used in the study is iron oxide coated sand carrier (IOCSC), iron oxide coated zeolite carrier (IOCZC), iron oxide plasticity carrier (IOPC) and platinum iron oxide plasticity carrier (PIOPC). The results of this study, IOPC is showed high arsenic adsorption strength and the maximum amount of adsorption than the IOCC. Based on the results of the arsenic adsorption characteristic, by using IOCC was conducted to column test. As a result, PIOPC is showed a high arsenic adsorption amount than IOPC, it was found that the time required to reach the breakthrough point is also extended. Therefore it is determined that stably compliance with water quality standards enhanced drinking water when using the PIOPC.

• Membrane and Water Treatment
• /
• v.7 no.3
• /
• pp.241-255
• /
• 2016

In this study, the treatability of arsenic (As) contaminated water by direct contact membrane distillation (DCMD) at different delta temperatures (${\Delta}T$) 30, 40 and $50^{\circ}C$ has been investigated. Two different pore sizes ($0.22{\mu}m$ and $0.45{\mu}m$) of hydrophobic membranes made of polyvinylidene fluoride (PVDF) were used. The membrane pore sizes, the operating temperatures, the feed solution As concentration and conductivity have been varied during the experimental tests to follow the removal efficiency and flux behavior. Both membranes tested had high removal efficiency of arsenite (As (III)) and arsenate (As (V)) and all permeates presented As concentration far lower than recommended $10{\mu}g/L$ of world health organization (WHO). As concentration was below detection limit in many permeates. Conductivity reduction efficiency was over 99% and the transmembrane flux (TMF) reached $19L/m^2.h$ at delta temperature (${\Delta}T$) of $50^{\circ}C$ with PVDF $0.45{\mu}m$ membrane. The experimental results also indicated that $0.45{\mu}m$ pore sizes PVDF membranes presented higher flux than $0.22{\mu}m$ pore sizes membranes. Regardless of all operating conditions, highest fluxes were observed at highest ${\Delta}T$ ($50^{\circ}C$).

• Journal of Soil and Groundwater Environment
• /
• v.23 no.1
• /
• pp.85-91
• /
• 2018

Arsenic (As) usually is bound to amorphous iron oxides in the soils, and it can be removed via dissolution of iron oxides. Inorganic acid and chelating agent are widely used to extract As in the soil washing. However, the overall performance is highly dependent on the state of As fractionation. In this study, oxalic acid and inorganic acids (HCl, $H_2SO_4$, and $H_3PO_4$) were applied to enhance the dissolution of iron oxides for remediation of As-contaminated soils. Oxalic acid was most effective to extract As from soils and removal of As was two times greater than other inorganic acids. Additionally, 75% of As bound to amorphous iron oxides was removed by 0.2 M oxalic acid. Arsenic removal by oxalic acid was directly proportional to the sum of labile fractions of As instead of the total concentration of As. Therefore, the oxalic acid could extract most As bound to amorphous iron oxides.

• Resources Recycling
• /
• v.15 no.5 s.73
• /
• pp.38-46
• /
• 2006

The removal of arsenic(V) using four different natural minerals were evaluated. Parameters like contact time, pH, adsorbent dosages, and As(V) concentration were optimized. The kinetics of adsorption was observed to be fast and reached equilibrium within 2h. As(V) adsorption on studied minerals was dependent on pH and followed a pseudo-second-order reaction model. For kaolin, maximum adsorption was found at pH 5.0. Whereas, in case of other three minerals, a pH range of 6.0-7.0 was found to be the best for As(V) adsorption. The maximum adsorption capacity (Q) was calculated by fitting Langmuir equation to the adsorption isotherms obtained under a specified condition. From the slope of best fit, the Q values were calculated to be 2.07, 2.15, 1.95 and 0.86 mg As(V)/g of bauxite, wad, iron ore and kaolin, respectively. Desorption of As(V) from loaded materials was dependent on the type of leaching reagents used. Based on the results, it was found that among the studied natural minerals, wad was the best As(V) adsorbent.