• Journal of Sensor Science and Technology
• /
• v.13 no.5
• /
• pp.342-349
• /
• 2004

SK (SPR Kinds) index, which can categorize the complicated measurement methods of surface plasmon resonance by simple method, has been proposed and verified. SK index is composed of three digits, where each digit presents the type of immobilized ligand, the type of illumination and the kinds of varying parameter, sequentially. The measurement method of (33#) series among SK indices shows the possibility of the multi-sensing capability, by which the response of 2-dimensional array of immobilized ligands can be detected simultaneously. The proposed possibility of multi-sensing capability has been verified by the modeling that is based on Fresnel reflection model.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.1
• /
• pp.25-31
• /
• 1999

This paper proposes a new wide-band beamforming algorithm which has Gaussian weighting at nested linear array for acoustic measurement. The beamforming is performed one-shot by using all sensors simultaneously, not octave-by-octave. Gaussian weighting of frequency-dependent function is applied to each sensor before time-delay compensation so as to control the frequency receiving band of each sensor. As the results of the simulations, it is confirmed that the proposed algorithm can form the one-shot beams having uniform directivity index and also it can be applied to the broad-band acoustic measurement.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.6
• /
• pp.521-526
• /
• 2010

Gas transmission pipelines are often inspected and monitored using the magnetic flux leakage method. An inspection vehicle known as a "pig" is launched into the pipeline and conveyed along the pipe by the pressure of natural gas. The pig contains a magnetizer, an array of sensors and a microprocessor-based data acquisition system for logging data. This paper describes magnetic flux leakage (MFL) signal processing used for detecting mechanical damages during an in-line inspection. The overall approach employs noise removal and clustering technique. The proposed method is computationally efficient and can easily be implemented. Results are presented and verified by field tests from an application of the signal processing.

• Journal of Sensor Science and Technology
• /
• v.26 no.3
• /
• pp.192-198
• /
• 2017

In this paper, we newly developed a passive transponder for visible light identification (VLID) using ultrasonic wave. The solar cell in the transponder receives the reader light and generates current for supplying power to the transponder circuit. At the same time the solar cell detects the interrogating signal in the visible light from the reader. The transponder recognizes the interrogating signal and generates the responding signal using ultrasonic wave. In experiments, we used 40 kHz ultrasonic wave for the responding signal from the transponder. The maximum read distance was about 3.4 m when the transponder was exposed to the reader light of 24W LED array.

• Journal of Sensor Science and Technology
• /
• v.15 no.5
• /
• pp.347-351
• /
• 2006

A novel surface plasmon resonance sensor, which can measure 2-dimensional array of immobilized ligands without using imaging devices such as CCD, has been proposed. Regular surface plasmon resonance can be directly used due to the insertion of additional layers with different thickness, on which each ligands are immobilized. Surface plasmon resonance signals are separated depending on the thickness of additional layers. The possibility of multi-sensing capability of the proposed surface plasmon resonance sensor has been verified by the modeling that is based on Fresnel reflection model.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.8
• /
• pp.75-82
• /
• 2013

We propose a fiber grating sensor system for condition monitoring of large scale wind turbine blades. For the feasibility test of the proposed sensor system, a down-scaled wind turbine has been constructed and experimented. Fiber grating sensors were attached on a blade surface for distributed strain and temperature measurements. An optical rotary joint was used to transmit optical signals between the FBG sensor array and the signal processing unit. Instead of broadband light source, we used a wavelength-swept fiber laser to obtain high output power density. A spectrometer demodulation is used to alleviate the nonlinear wavelength tuning problem of the laser source. With the proposed sensor system we could measure dynamic strain and temperature profiles at multi-positions of rotating wind turbine blades.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.251-252
• /
• 2006

A development of surface acoustic wave gas sensor to detecting volatile gas has been observed by monitoring output signal as function of time onto the network analyzer. The SAW sensor with a center frequency of 200MHz was fabricated on $42^{\circ}$ S-T Quartz substrates. Using the gas chromatography column has been selectivity. Experimental results, which show the phase change of output signal under the absorption of volatile gas onto sensors, were presented. The proposed sensor has the properties of high sensitivity compare to the conventional SAW gas sensor and chemical selectivity. Thus, it is thought these results are applicable for use in sensor array of an high performance electronic nose system.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.286-288
• /
• 2005

If we are to realize the everyday benefits promised by pervasive computing and context-aware applications, we must first develop the infrastructure to provide contextual location and orientation information through pervasive computing elements. We have implement indoor positioning system to supply orientation information. We have used ultrasound in indoor positioning system for distance and orientation measurements, then propose a set of methods to calculate orientation from an array of well placed ultrasonic sensors operating in the indoor positioning system. We have design and implement a indoor positioning system using a combination of hardware and software and demonstrate end-to-end functionality of the system.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2006.04a
• /
• pp.40-54
• /
• 2006

It's not easy to detect the high quality and functional compounds for control quality of food materials. The electronic nose was an instrument, which comprised of an array of electronic chemical sensors with partial specificity and an appropriate pattern recognition system, capable of recognizing simple or complex odors. It can conduct fast analysis and provide simple and straightforward results and is best suited for quality control and process monitoring in the field of functional foods. Numbers of applications of an electronic nose in the functional food industry include discrimination of habitats for medicinal food materials, monitoring storage process, lipid oxidation, and quality control of food and/or processing with principal component analysis, neural network analysis and the electronic nose based on GC-SAW sensor. The electronic nose would be possibly useful for a wide variety of quality control in the functional food and plant cultivation when correlating traditional analytical instrumental data with sensory evaluation results or electronic nose data.

• Journal of Sensor Science and Technology
• /
• v.24 no.4
• /
• pp.232-238
• /
• 2015

In this paper, we introduce a passive transponder in which an LED is used for both a light transmitter and a receiver, and a solar cell is used for supplying power to the all devices in the transponder. The LED in the transponder operates as a photodetector in the receiving mode, and acts as a light source in the transmitting mode. The current responsivity of the LED detector was measured to be in the order of $10^{-4}A/W$, and the receiving bandwidth with a load resistance of $10k{\Omega}$ was about 10 to 30 kHz. Using the LED for an optical transceiver in a VLID transponder, the detection range was about 70 cm when the transponder was illuminated by the visible light from a $3{\times}3$ LED array in a reader.