• Wind and Structures
• /
• 제29권1호
• /
• pp.43-53
• /
• 2019

Vortex-induced vibration of three circular cylinders (each of diameter D) in an equilateral triangular arrangement is investigated using the immersed boundary method. The cylinders, with one placed upstream and the other two side-by-side downstream, are free to vibrate in the cross-flow direction. The cylinder center-to-center spacing L is adopted as L/D = 2.0. Other parameters include the Reynolds number Re = 100, mass ratio $m^*=2.0$, reduced velocity $U_r=2{\sim}15$ and damping ratio ${\zeta}=0$. Cylinder vibration responses are dependent on $U_r$ and classified into five regimes, i.e. Regime I ($U_r{\leq}3.2$), Regime II ($3.2<U_r{\leq}5.0$), Regime III ($5.0<U_r{\leq}6.4$), Regime IV ($6.4<U_r{\leq}9.2$) and Regime V ($U_r>9.2$). Different facets of vibration amplitude, hydrodynamic forces, wake patterns and displacement spectra are extracted and presented in detail for each regime.

• Steel and Composite Structures
• /
• 제42권4호
• /
• pp.427-446
• /
• 2022

Cutouts in the beams or plates are often unavoidable due to inspection, maintenance, ventilation, structural aesthetics purpose, and sometimes to lighten the structures. Therefore, there will be a substantial reduction in the strength of the structure due to the introduction of the cutouts. However, these cutouts can be reinforced with the different patterns of ribs (stiffener) to enhance the strength of the structure. The present study highlights the influence of the elliptical cutout reinforced with a different pattern of ribs on the stability performance of such stiffened composite panels subjected to non-uniform edge loads by employing the Finite element (FE) technique. In the present formulation, a 9-noded heterosis element is used to model the skin, and a 3-noded isoparametric beam element is used to simulate the rib that is attached around a cutout in different patterns. The displacement compatibility condition is employed between the plate and stiffener, and arbitrary orientations are taken care by introducing respective transformation matrices. The effect of shear deformation and rotary inertia are incorporated in the formulation. A new mesh configuration is developed to house the attached ribs around an elliptical cutout with different patterns. Initially, a study is performed on the panels with different stiffener schemes for various ply orientations and for different stiffener depth to width ratios (d_s/b_s) to determine an optimal stiffener configuration. Further, various parametric studies are conducted on an obtained optimal stiffened panel to understand the effect of cutout size, cutout orientation, panel aspect ratio, and boundary conditions. Finally, from the analysis, it can be observed that the arrangement of the stiffener attached to a panel has a major impact on the buckling capacity of the stiffened panel. The stiffener's depth to width ratio also significantly influences the buckling characteristic.

• 복식문화연구
• /
• 제17권6호
• /
• pp.972-980
• /
• 2009

This study was aimed to develop ume flower image into a competitive fashion culture product image by reinterpreting the image in modern terms, manufacturing patterns and applying them to various items. In terms of method, ume flower petal was used as a motive and developed into a pattern, using Adobe Illustrator 10, a computer design program. Based on the symbolic image and realist form of ume flower, three new basic motives of new figurative image were set using form omission, simplification, overlapping, repetition and graphic elements. Each motive developed transformed patterns through the change, transformation, combination of colors. The repetitive unit of each motive set expressed geometrical patterns and combination of flower patterns using pattern repetition and $45^{\circ}$ repetition technique in combination with the check arrangement using quadrangle, and set the direction of design that would fit for each item of fashion culture products. Also, consistency and practicality were sought in the goods planning composition of each item by applying motive pattern results to the fashion culture goods, such as neckties, scarves, T-shirts that can be consumed in everyday life. It seems that more creative culture goods including ume flowers will be developed by seeing our own cultural elements as well as flower patterns like ume flower with modern trends.

• 교육녹색환경연구
• /
• 제5권2호
• /
• pp.1-13
• /
• 2006

The purpose of this study is to clarify the actual conditions of spatial composition of educational facilities by design process model. This article discuses about the characteristics of the floor plan composition and the site plan patterns of 49 middle and high schools in gyeongnam province. The results of this study are summarized as follows; 1) Comparing to traditional middle and high school facilities, it occurs various types of plane and the area is somewhat expanded in the school with same class size, however, it needs to improve facility standards in its reality to deal with the change of future educational environment actively. 2) Spatial composition of educational facilities should functionally designed considering that the characteristics of design process model. In facilities arrangement of middle and high schools, it shows diverse forms of arrangement from existing uniform straight type, however, most of schools do not being against the simple in their external space. Therefore, it requires an expansion of space siæ and facilities for the change of school life outside class.

• 대한치과의사협회지
• /
• 제50권10호
• /
• pp.616-619
• /
• 2012

The aim of this study was to clarify the arrangement of the zygomaticus major muscle, and to describe morphology of zygomaticus minor muscle. After a detailed dissection, the zygomaticus muscles were observed in 66 embalmed cadavers. It was found that the insertion of zygomaticus major was divided into superficial and deep bands(42/70, 60%). Zygomaticus minor was inserted not only upper lip also alar portion(5/54, 9.2%). The arrangement and insertion patterns of the zygomaticus muscles in this study are expected to provide critical information for understanding or smile pattern and treatment or fold.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1998년도 봄 학술발표회 논문집
• /
• pp.135-139
• /
• 1998

Poly(vinyl acetate) (PVAc) from which atactic poly(vinyl alcohol) (PVA) is derived, is always noncrystalline. This was attributed to the irregular steric arrangement of the acetyl groups in PVAc. However, the X-ray diffraction patterns of atactic PVA, a derivative of PVAc, were found to show distinct crystallinity, and to give an identity period of 2,52 ${\AA}$ along the fiber axis, despite the expectation of an irregular arrangement of the hydroxyl groups in atactic PVA, in the same manner as that of the acetyl groups in PVAc.(omitted)

• KIEAE Journal
• /
• 제2권3호
• /
• pp.11-16
• /
• 2002

Indoor air environment is one of the most important factors that affect resident's health and comfort level. In this paper, the influence of ventilation efficiency with different types of furniture arrangement at breathing zone in a room was analyzed by numerical simulation based on computational fluid dynamics(CFD). The furniture layout of students' bedroom have been classified by three different patterns so that SVE3(scale for ventilation efficiency3) in the rooms was analyzed for air flow distribution. According to the results of the study, SVE3 has the maximum value in spaces between furnitures and each comer of the room. The furniture arrangement influences the ventilation efficiency. It was con finned that ventilation effective in a room is not uniformly distributed as compared the breathing zone with all the area in a room. It means that a study of ventilation efficiency was considered relatively with target zone(a residential or breathing zone) and all the area in a space.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2005년도 춘계학술발표대회 논문집
• /
• pp.283-286
• /
• 2005

A design of Ice Cream Shop is an intended creation activity to increase the sales and profits by planning the space creativity and effectively. Accordingly, it should give the aesthetic and psychological satisfaction by making the space formative as a visual space expressed by a unique identity with a functional convenience. The design of Ice Cream Shop should reflect the changing demands and patterns of a consumption life as a result. Therefore a design plan is required to predict the living and culture. The design process can be divided into a basic planning, basic design and implementation design in large. The details are as follows. When a designer is assigned to the design from a client, he should start his work from surveying the site and arrangement, After arrangement, he sets up basic guidlines, which are called as a basic planning.

• 복식
• /
• 제67권1호
• /
• pp.56-73
• /
• 2017

The purpose of this study is to categorize the lotus patterns of traditional Korean fabrics. This study collected 169 fabrics of Korean lotus flower patterns and then made a list of era, configuration of pattern, type of artifact, findspot and holding institutions. It analyzes the characteristics of 251 kinds of lotus woven on 169 Korean fabrics, 251 kinds of lotus on 169 fabrics divided into Realistic Type, Design Type, and Abstract Type. They consist of 213 kinds of Design Type(84.8%), 21 kinds of Realistic Type(8.4%), and 17 kinds of Abstract Type(6.8%). The largest part of lotus patterns is Design Type. Design Types are subdivided into 14 types. This result contrasted with the conclusion of the research paper about peony patterns in Traditional Korean Textiles. The largest part of peony patterns was Realistic Types. Realistic Types of lotus patterns in Korean textiles are subdivided into 6 types. Korea has more diverse forms and a higher ratio of Realistic Types than China and this can be interpreted to reflect that there is a tendency in Korea to prefer natural patterns. Besides abstract Types are subdivided into 3 types. When the lotus flower patterns of Korea and China are categorized and similar types are compared, there are some unique patterns that appear only in Korea or China. Not only that, similar types display differences in pattern arrangement methods and portrayal among the two countries. If such study results are utilized, they can be grounds for distinguishing the production area of lotus flower textile fabrics when they are newly excavated in the future.

• 건축역사연구
• /
• 제25권4호
• /
• pp.57-64
• /
• 2016

It was believed that Jeongnimsa temple was built after the capital was moved from Gongju to Buyeo. It was confirmed that it was built A.D. $625{\pm}20$ by conducting a paleomagnetic analysis on the fireplace, which was recently found at the bottom of Jungmunji(middle gate). Consequently, it is assumed that the temple was built in the early 7th century unlike the previous point of view. Therefore, this study evaluated if the fireplace at the bottom of Jungmunji was found at the geological stratum representing the Jeongnimsa temple. Moreover, the study examined when the fireplace at the bottom of Jungmunji was constructed on the soil stratum. It is possible that the fireplace was built in the early 7th century as shown in the paleomagnetic analysis. However, when we compared the soil strata of the Jungmunji and the existing five-story stone pagoda, it showed that the ground was prepared differently and they were built over a fairly long period of time. Furthermore, I discovered that there was a wooden pagoda under the five-story stone pagoda by examining the soil strata map. Therefore, previous studies evaluated the arrangement of auxiliary buildings of Jeongnimsa temple and concluded that it was built in the early 7th century. It is hard to determine when the temple was built based on the arrangement of auxiliary buildings, because it takes a long time to build a temple and auxiliary buildings can be relocated during this long construction period. Rather, we have to admit that there are various arrangement patterns through minor changes in buildings from the one pagoda and one main building(Geumdang) arrangement.