• Journal of Biosystems Engineering
• /
• v.38 no.2
• /
• pp.95-102
• /
• 2013

Purpose: Using a laboratory indented cylinder separator, broken rice separation experiments were conducted and the characteristics of the separation process were studied to provide information for developing a prototype indented cylinder broken rice separator. Methods: Rice (Ilmi variety) milled in a local RPC was used for the experiment. Rice kernels were classified into four groups according to their length l; whole kernels (I > 3.75 mm), semi-whole kernels (2.5 < I < 3.75 mm), broken kernels (1.75 < I < 2.5 mm), and foreign matters (I < 1.75 mm). A laboratory grain cleaner, Labofix '90 (Schmidt AG, Germany) was used for the experiments. Experiments were designed as a $4{\times}4$ factorial arrangement in randomized blocks with three replications. Cylinder rotational speeds (17, 34, 51, 68 rpm) and trough angles (15, 37.5, 60, $82.5^{\circ}$) were the two factors and feed rates (25, 50 kg/h), indent shapes (Us, $S_1$ type), and indent sizes (2.5, 3.75 mm) were treated as the blocks. Two 125 g samples and one 125 g sample were taken at the cylinder outlet and from the trough, respectively. The whole, semi-whole, and broken kernel weight ratio of the samples and feed was determined by a rice sizing device. From these weight ratios, purities, degrees of extraction and coefficient of separation efficiency were calculated. Results: Trough angle, cylinder speed, and their interaction on the coefficient of separation efficiency were statistically significant. Cylinder speed of 17, 34, and 51 rpm made the most effective separation when the trough angle was $15^{\circ}$ or $37.5^{\circ}$, $60^{\circ}$, and $82.5^{\circ}$, respectively. Maximum values of coefficient of separation efficiency were in the range of 60 to 70% except when the indent size was 2.5 mm and were recorded for the combinations of low cylinder speed (17 rpm) with medium trough angle ($37.5^{\circ}$ or $60^{\circ}$). Indent shape did not appear to make any noticeable difference in separation efficiency. Conclusions: Due to the interaction effect, the trough angle needs to be increased appropriately when an increase in cylinder speed is made if a rapid drop of effectiveness of separation should be avoided. In commercial applications, $S_1$ type indents are preferred because of their better manufacturability and easier maintenance. For successful separation of broken kernels, the indent size should be set slightly bigger than the actual sizes of broken kernels: an indent size of 3.0 mm for separating broken kernels shorter than 2.5 mm.

• Applied Chemistry for Engineering
• /
• v.18 no.5
• /
• pp.475-482
• /
• 2007

The thermal and optical properties of glucose penta(cholesteryloxycarbonyl)alkanoates (CAGLn, n = 2~8, 10, the number of methylene units in the spacer) were investigated. All the CAGLn formed monotropic cholesteric phases with left-handed helical structures. CAGLn with n = 2 or 10, in contrast with CAGLn with $3{\leq}n{\leq}8$, did not display reflection colors over the full cholesteric range, suggesting that the helical twisting power of the cholesteryl group highly depends on the length of the spacer joining the cholesteryl group to the glucose chain. The isotropic-cholesteric transition point ($T_{ic}$) decreased with increasing n and showed no odd-even effect. The plot of transition entropy at $T_{ic}$ against n had a sharp negative inflection at n = 7. The optical pitches (${{\lambda}_m}^{\prime}$ s) of CAGLn with $3{\leq}n{\leq}8$ decreased with increasing temperature. However, the temperature dependence of the ${\lambda}_m$ of the derivatives exhibited pronounced dependence on n. The transitional properties and the temperature dependence of the ${\lambda}_m$ observed for CAGLn were discussed in terms of the differences in arrangement of the cholesteryl groups and the conformation of the molecules.

• Journal of Animal Environmental Science
• /
• v.17 no.2
• /
• pp.107-114
• /
• 2011

This study was designed to determine the effect of season and split-sex feeding on performance, stress and carcass quality of finishing pigs. Two hundred and seventy cross-bred finishing pigs $(82.1{\pm}0.82kg)$ were randomly divided into six groups in 2 seasons (summer and winter) ${\times}$ 3 split-sex feeding (female only, castrated male and mixed) factorial arrangement of treatments. In winter, feed intake and weight gain of finishing pigs were better than summer (p<0.05). Split-sex feeding was affected the feed conversion, feed conversion of finishing pigs were superior in winter and mixed groups. Plasma concentrations of cortisol as a stress indicators was greater in the mixed groups vs female only and castrated male groups. There were no interactions between the season and split-sex feeding in their effects on these blood variables. The season was affected the carcass characteristics and PSE incidence of the finishing pigs, PSE incidence was low in winter and mixed groups. Meat quality did not show any significant difference due to the difference of season and split-sex feeding of finishing pigs. There was no significant difference in the pH, drip loss and meat color of pork loin between the season and split-sex feeding of finishing pigs. In conclusion, the results of this study suggest that we need more precise on-farm management practice in summer and application of split-sex feeding skills to reduce the stress and improve welfare status of finishing pigs.

• Korean Journal of Food Science and Technology
• /
• v.13 no.3
• /
• pp.181-187
• /
• 1981

The changes in the chemical composition of yeast extracts during autolysis and their effect to the sensory quality were studied with baker's yeast, Saccharomyces cerevisiae. The amounts of extracted solids, proteins, amio-N. amino acids, especially glutamic acid, alanine and lysine, increased by the autolysis time up to 48 hrs. The results of sensory evaluation made by the multiple paired comparision test and Duncan's test indicated a significant difference is taste by the time of autolysis. In the profile test, the flavor character notes expressed by the panel were 17 different characters, 11 in aroma and 6 in taste. The character notes and the intensity of flavor changed with the time of autolysis. The sharp and beany flavor of the extracts which was autolyzed for 4 hours turned into meaty and worty flavor by 48 hours of autolysis. A proper arrangement of the flavor characters in the quantitative descriptive chart could provide a weighted value of the flavor grade. The aroma grade index and the taste grade index correlated to the amplitudes of the profile test.

• Journal of KIISE:Computing Practices and Letters
• /
• v.10 no.2
• /
• pp.174-188
• /
• 2004

In the life environment changed with not only the quality and the price of the products but also the material abundance, it is the most crucial factor for the strategy of product sales to investigate consumer's sensibility and preference degree. In this perspective, it is necessary to design and merchandise the products in cope with each consumer's sensibility and needs as well as its functional aspects. In this paper, we propose the Fashion Design Recommender Agent System (FDRAS-pro) for textile design applying collaborative filtering personalization technique as one of the methods of material development centered on consumer's sensibility and preference. For a collaborative filtering system based on textile, Representative-Attribute Neighborhood is adopted to determine the number or neighbors that will be used for preferences estimation. Pearson's Correlation Coefficient is used to calculate similarity weights among users. We build a database founded on the sensibility adjectives to develop textile designs by extracting the representative sensibility adjectives from users' sensibility and preferences about textile designs. FDRAS-pro recommends textile designs to a customer who has a similar propensity about textile. To investigate the sensibility and emotion according to the effect of design factors, fertile designs were analyzed in terms of 9 design factors, such as, motif source, motif-background ratio, motif variation, motif interpretation, motif arrangement, motif articulation, hue contrast, value contrast, chroma contrast. Finally, we plan to conduct empirical applications to verify the adequacy and the validity of our system.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.3
• /
• pp.139-148
• /
• 2015

The purpose of this paper is to induce the ductile behavior of the UHPFRC member after the peak load by using the bundle of longitudinal reinforcing bar as a substitute for steel fiber. Experiments on the flexural behavior of the Ultra High Performance Concrete rectangular beam with the combination of the steel fiber and longitudinal reinforcing bar were carried out. The volume fractions of steel fiber are 0%, 0.7%, 1%, 1.5%, 2% and the reinforcement ratios of longitudinal reinforcing bar which induce the ductile behavior are 0.0036, 0.016, 0.028 and 0.036. 15 UHPC beams were made with the combination of these test factors. Not only steel fiber but also bundle of longitudinal reinforcing bar has the effect to induce ductile behavior of UHPC structural member. The combination of 0.7% volume fraction of steel fiber and 0.028 reinforcement ratio showed the most economic combination. The relationship of load-deflection, strain variation of the concrete and the crack pattern indicate the usefulness of the bundle of the longitudinal bar which has small diameter with close arrangement each other.

• Journal of Animal Science and Technology
• /
• v.53 no.2
• /
• pp.133-138
• /
• 2011

Two experiments were conducted to determine the effects of supplementing different levels of kaolin (Exp. 1) and effects of age of layers and levels of kaolin (Exp. 2) on the performance, egg and shell quality parameters of laying hens. In Exp.1, 64 laying hens of 58 wks age were randomly allotted to 4 treatments of 16 hens in each. Dietary treatments were basal diet supplemented with 0.0, 0.2, 0.4 and 0.6% kaolin. In Exp. 2 96 laying hens were divided into 6 groups of 16 hens each in a 2 ${\times}$ 3 factorial arrangement (two different ages, 30 and 58 wk and three levels of kaolin, 0.0, 0.2 and 0.4%). In both the experiment there were linear decreases in feed intake (P<0.001), improvement in FCR (P<0.05), and egg production (P<0.05), with increasing dietary kolin level. Supplementation of kaolin had no effect on the egg and shell quality parameters in both experiments. Thus, it is concluded that kaolin may improve performance, and 0.2% level showed the best laying performance.

• Korean Journal of Acupuncture
• /
• v.20 no.3
• /
• pp.35-47
• /
• 2003

Objective : The purpose of this study was to investigate the significance of the Oriental medical treatment using He-Ne laser with low energy intravascular Laser Irradiation of Blood(ILIB) through the superficial venules. Methods : The investigation of details connected with the superficial venules in the literature is performed. The investigation of details connected with the pricking blood techniques through the superficial venules in the literature is performed. The classification of the pricking blood techniques through the superficial venules by the blood-letting puncture methods in the literature is performed. The arrangement of domestic clinical treatises on the effectiveness of medical treatment using He-Ne laser with low energy ILIB through the superficial venules is performed. The consideration on the methodology for the improvement of the clinical effectiveness of He-Ne laser with low energy ILIB through superficial venules is performed. Results and Conclusions : The superficial venules are small arteries, veins and capillaries in the superficial region of the human body. In the pricking blood techniques, there are the blood-letting puncture using the implement of acupuncture to the Jing points, Extra points and superficial blood vessels and the acupuncture using the Hirudo. The methods of the blood-letting puncture are classified into the venous blood-letting puncture, the pricking , the picking out white fiber-like substances from the subcutaneous tissue, the cluster needling, the scattered needling, the blood-letting puncture of the tready collateral branch of the large channel and the blood-letting puncture of skin. The He-Ne laser with low energy ILIB through the superficial venules belongs to the Oriental medical treatment as the method of the blood-letting puncture in the vein of cubital fossa. The He-Ne laser with low energy ILIB has an effect on hyperfibrinogenemia, hyperlipidemia, speech and motor dysfunction in the case of cerebral infarction, headache, dizziness, pain and numbness. It is considered that fundamental research on the biological change of the human body, the experimental animal and the unicellular animal, and research on the effectiveness and the safety, and the development of He-Ne laser with low energy ILIB of an effective wavelength range are necessary.

• Journal of Technologic Dentistry
• /
• v.6 no.1
• /
• pp.31-86
• /
• 1984

The educational purpose of a junior college is believed to be to effectively train and produce professional workers equipped with the knowledge and skills required in various technical fields of modern society. Since dental technology takes its share of an important role through the enhancement of people's health and the construction of a whlfare society, the prosthodontia department is imposed with a great responsibility to train highly skilled, responsible dental technicians who will meet the social demands. To attain this goal, those who are in charge of the training and education should place emphasis on the development of better educational programs. In other words, the present curriculum which is lacking in many comprehensive aspects, is not satisfactory to provide the students with the required know-how and qualities. As is known, a currculum is the detailed guidance to the efficient operation of an educational program, and that of dental technology is not an exception. In addition, dental technology requires very detailed programs in training, because it requires both diversified and comprehensive application of serveral different fields. The following are the main points to be taken into consideration in developing an effective curriculum for this department. 1. The curriculum should be gradually expanded so that the fundamental subjects will contain principal theories which can be directly applied to the specified majoring subjects. 2. An effective arrangement of time tables should be provided so that basic practice and experiments can be conducted in direct connection with the leatures on the basic theories. 3. For a creative and up-to-date curriculum to help cope with the problems in achieving the aims of technological development and scientific education, intensive and extensive studies should be done on the curricula developed in the advanced countries. 4. The specific majoring subjects should be rearranged to contain new theories which are beneficial to dental technology. As an institution which is spearheaded for ondustrial-educational cooperation, the Junior collegeis role demands that the department should make every possible effect to cultivate highly-skilled technicisns. The following suggestions are made to help work out an ideal curriculum. 1. The basic theory subjects should be selected with consideration toward closely related majoring subjects. 2. The curriculum should be efficiently operated to effectively relate theories with experiments. 3. Subject importance must be rearranged ; It has been found that the ideal proportion of cultural, elective and required subjects is 20%, 20% and 60% respectively. 4. The credit allotments should be reconsidered: The total credits required for completion should preferably be 80; 16 for the cultural and the elective subjects respectively and 48 for the required subject. 5. A Commissioned education system should be formalized for strengthening industrial educational cooperation. 6. Experiments and practice should be intensified with the support of improved laboratory facilities. 7. The training period should be expanded form the present two years to three of four years, in order to produce more highly qualified technicians.

• Korea journal of population studies
• /
• v.29 no.1
• /
• pp.57-70
• /
• 2006

Patterns and changes of marriage have drawn much attention as they have been pointed out a key factor of low fertility. Nonetheless, systematic studies on marriage have been quite limited. This study, using recent nationwide survey on marriage and fertility, attempts to explain whether and how intention of marriage would differ between never married men and never married women. The logit regression analysis reveals that the likelihood of planning marriage between both sexes are still different even after controlling demographic characteristics, economic status, household and family background, and attitudes toward sex and premarital cohabitation. Furthermore, important factors affecting the likelihood of planning marriage turns out to be different between men and women. For instance, men with a job is more likely than men without a job to plan marriage. However, for women, the effect of having a job is not found. Such result, with other sex differential effects of living arrangement and attitudinal variable, suggests that the mechanism through which men and women transit from singlehood to marriage would differ. More attention on gender differential should be paid in developing conceptual arguments and conducting empirical analysis regarding marriage and its related topics.