• 공업화학
• /
• 제20권3호
• /
• pp.258-265
• /
• 2009

Poly(tetramethylene glycol) (PTMG, Mw = 2000), dicyclohexylmethane-4,4'-diisocyanate $(H_{12}-MDI)$와 4,4'-diphenylmethane diisocyanate (MDI)의 이소시아네이트 혼합물, 그리고 음이온기로서 dimethylol propionic acid (DMPA)를 사용하여 프리폴리머 혼합법으로 음이온성 폴리우레탄 분산체(PUD)를 합성하였다. 프리폴리머의 중화제로서는 triethylamine (TEA)을, 그리고 프리폴리머의 가지연장제로는 ethylene diamine (EDA)를 사용하였다. DMPA의 몰비율과 혼합이소시아네이트에서 방향족 이소시아네이트의 함양이 PUD의 입자크기와 점도변화에 미치는 영향을 연구하였다. 그리고 또한 DMPA의 몰비율과 방향족 이소시아네이트 함양 변화에 따른 PUD 도막의 기계적 성질과 열적 성질에 대해서도 논의하였다. DMPA의 몰비율이 증가할수록 음이온성 PUD의 입자크기와 점도가 감소하였으나, 동일한 DMPA 함량에서는 이소시아네이트 혼합물 중 방향족 이소시아네이트의 함량이 증가 할수록 입자의 크기와 점도가 증가하는 경향을 나타냈다. 혼합 이소시아네이트의 몰비율이 일정할 때 PUD 도막의 인장강도는 DMPA의 함량이 증가함에 따라 증가하였으나, 신장율은 감소하였다. PUD 도막의 열분해 온도에 있어서, DMPA 함량에 대한 영향은 크게 나타났으나, 방향족 이소시아네이트 함양의 영향은 DMPA 함량이 낮은 조건에서는 상대적으로 크지 않았다.

• 한국응용과학기술학회지
• /
• 제27권4호
• /
• pp.461-469
• /
• 2010

Polyurethane adhesive is used in various fields as flexible packaging materials including a food packaging field. Therefore, the purpose of this study is synthesis of polyurethane adhesive which uses aliphatic isocyanate, and compares with aromatic isocyanate. The isocyanates for this test are toluene-2,4-diisocyanate(TDI), hexamethylene diisocyanate(HDI), 4,4-dicyclohexyl ethane diisocyanate($H_{12}MDI$), and isophorone diisocyanate(IPDI). And, the effect of any other diisocyanate are evaluated by several methods as for curing rate test, accelerate weathering test, and peel strength test. The polyurethane adhesive using curing catalyst and HDI has adhesion strength of about 560 g/15 mm between aluminium foil and nylon, about 1,520 g/15 mm between nylon and CPP. Those parameters are similar to polyurethane adhesive with TDI. Also, in case of curing rate, those are similar to TDI type polyurethane adhesive. Moreover, data of ${\Delta}E$ as color variation by QUV tester is equal to 4.12, as 48% against those of TDI type.

• Macromolecular Research
• /
• 제13권5호
• /
• pp.427-434
• /
• 2005

To improve the performance and reduce raw material costs, blocked isocyanates were prepared with mixture of blocking agents in many industries. Three blocked isocyanates (adducts) namely $\varepsilon$-caprolactam/benzotriazole-blocked 4,4'-diphenylmethane diisocyanate (MDI), toluene-2,4-diisocyanate (TDI) and 4,4'-dicyclohexyl-methane diisocyanate ($H_{12}$MDI) were synthesized. Six reference adducts were also prepared by blocking MDI, TDI, and $H_{12}$MDI with $\varepsilon$-caprolactam ($\varepsilon$-CL) or benzotriazole. The reactions were carried out in acetone medium and dibutyltin dilaurate (DBTDL) was used as a catalyst. The progress of the blocking reaction was monitored by IR spectroscopy. De-blocking temperatures (dissociation temperatures) of these adducts were studied using DSC and TGA and the results were correlated. As expected, the thermal analysis data showed that de-blocking temperature of blocked aromatic isocyanates was lower than that of the blocked aliphatic isocyanates. The low de-blocking temperature of blocked aromatic isocyanate could be due to electron withdrawing benzene ring present in the blocked isocyanates. It was also found that benzotriazole-blocked adducts de-blocked at higher temperature compared with $\varepsilon$-CL-blocked adducts.

• 접착 및 계면
• /
• 제7권4호
• /
• pp.53-59
• /
• 2006

The paper highlights technical advances and introduces recent innovations such as smart curing laminating adhesives for flexible packaging with low migration rates of aromatic isocyanates and amines. Latent reactive one-part systems on the basis of surface deactivated solid isocyanates open up new dimensions for heat setting adhesives and waterborne PU dispersions. The new generation of Purmelt Micro Emission adhesives contains less than 0.1% of MDI monomer, thereby drastically reducing the emission of hazardous isocyanate vapors during processing and setting a significantly improved technical standard in occupational safety. Once again, polyurethane adhesives have demonstrated their unique ability to adapt to new process, product, safety and environmental requirements.

• 대한화학회지
• /
• 제20권1호
• /
• pp.59-72
• /
• 1976

수소화붕소아연의 선택환원성을 조사하기 위하여 대표적 유기화합물 54종을 택하여 수소화붕소 아연과 일정한 조건 (THF 용액, 실온, 수소화이온의 농도 : 0.5M, 유기화합물의 농도 : 0.125M)하에서 반응시켜 대략의 반응속도와 정량관계를 알아보았다.

• 한국응용과학기술학회지
• /
• 제19권1호
• /
• pp.25-32
• /
• 2002

Two PU flame-retardant coatings, 2,3-DBPO/N-l00 (DBPON) and 2,3-DBPO/IL (DBPOI), were prepared by curing 2,3-dibromo modified polyester (2,3-DBPO) with isocyanate curing agent Desmodur N-l00 (or Desmodur IL) at room temperature. The physical properties and flame-retardancy of the two coatings were tested and compared. As a result, the pot-life, yellowness index, lightness index difference, $60^{\circ}$ specular gloss, cross-hatch adhesion, viscosity, and accelerated weathering resistance of DBPON were better than those of DBPOI; the fineness of grind of the two coatings were the same; and the drying time, hardness, and abrasion resistance of DBPOI were better than those of DBPON. The flame retardancy of the flame-retardant coatings increased with the content of the flame retarding component, 2,3-dibromopropanoic acid (2,3-DBP); and the LOI values of the two coatings were in a range of $27{\sim}29%$ when the content of 2,3-DBP was 30wt%.

• Elastomers and Composites
• /
• 제58권3호
• /
• pp.121-127
• /
• 2023

The effect of diisocyanate type on the decomposition temperature of polyurethane (PU) hydrolysis was investigated in a subcritical water medium up to 250℃. PU samples were prepared using different types of diisocyanate: two aromatic diisocyanates (4,4'-methylene diphenyl diisocyanate (MDI) and methyl phenylene diisocyanate (TDI)), one unbranched aliphatic diisocyanate (hexamethylene diisocyanate (HDI)), and two cyclic aliphatic diisocyanates (4,4'-methylene dicyclohexyl diisocyanate (H₁₂MDI) and isophorone diisocyanate (IPDI)). The pressure had no effect on hydrolysis in the range of 70-250 bar. The decomposition temperature of the PU samples increased in the following order: TDI-PU (199℃) < H₁₂MDI ≈ IPDI ≈ HDI (218-220℃) < MDI-PU (237℃). This order of increase in temperature is related to the electron-donating ability of the group to connected to the nitrogen of the urethane unit. When the temperature of the (PU + water) mixture reached the specific decomposition temperature, the PU samples hydrolyzed completely within 5 min into primary amine and 1,4-butanediol. The hydrolysis products from MDI-PU and H₁₂MDI-PU were separated into a liquid phase rich in (BD + water) and a solid low phase rich in amine, whereas the products from TDI-, IPDI-, and HDI-PU existed in a single aqueous phase.

• 대한화학회지
• /
• 제21권2호
• /
• pp.108-120
• /
• 1977

수소화붕소리튬-테트라히드로푸란용액의 환원특성에 대한 계통적인 연구가 52가지의 대표적인 작용기를 가진 유기화합물을 가지고 표준조건($0^{\circ}$, 테트라히드로 푸란)에서 대략의 반응속도 및 정량 관계를 알아봄으로서 이루어 졌다.

• 대한화학회지
• /
• 제17권4호
• /
• pp.275-285
• /
• 1973

유기화합물의 선택환원에 필요한 자료를 얻기 위하여 수소화붕소나트륨과 염화알루미늄의 3:1 혼합물의 테트라히드로푸란 용액에서의 환원성을 규명하였다. 49개의 대표적 유기화합물을 골라 이시약과 실온에서 작용하여 대략의 반응속도와 정량관계를 알아보았다. 테트라히드로푸란 용액에서 염화알루미늄 1몰에 수소화붕소나트륨 3몰을 가하면 현탁용액이 생기는데 수소화붕소나트륨 보다는 훨씬 환원성이 강하다. 알데히드와 케톤은 한시간 이내에 빨리 환원되고 아실유도체는 서서히 그러나 카르복시산은 매우 느리게 환원되었다. 에스테르, 락톤, 에폭시드는 수소화붕소나트륨이나 보란보다 훨씬 빨리 환원되었다. 삼차 아미드는 서서히 환원되었으나 일차 아미드는 수소는 발생하지만 환원은 거의 일어나지 않았다. 벤조니트릴은 30분에 환원이 완결되었으나 카프로니트릴은 느리게 환원되었다. 니트로화합물, 이황화물, 술폰등은 이 시약과 반응하지 않으나 아조, 아족시, 옥심기는 서서히 반응하고 이소시안산페닐은 도중단계까지만 환원되었다 올레핀은 쉽게 수소화붕소화 반응을 하였다.

• Bulletin of the Korean Chemical Society
• /
• 제15권10호
• /
• pp.873-881
• /
• 1994

The approximate rate and stoichiometry of the reaction of excess diisobutylaluminum hydride-dimethyl sulfide complex($DIBAH-SMe_2$) with organic compounds containing representative functional group under standardized conditions (toluene, $0{\circ}C$) were examined in order to define the reducing characterstics of the reagent and to compare the reducing power with DIBAH itself. In general, the reducing action of the complex is similar to that of DIBAH. However, the reducing power of the complex is weaker than that of DIBAH. All of the active hydrogen compounds including alcohols, amines, and thiols evolve hydrogen slowly. Aldehydes and ketones are reduced readily and quantitatively to give the corresponding alcohols. However, $DIBAH-SMe_2$ reduces carboxylic acids at a faster rate than DIBAH alone to the corresponding alcohols with a partial evolution of hydrogen. Similarly, acid chlorides, esters, and epoxides are readily reduced to the corresponding alcohols, but the reduction rate is much slower than that of DIBAH alone. Both primary aliphatic and aromatic amides examined evolve 1 equiv of hydrogen rapidly and are reduced slowly to the amines. Tertiary amides readily utilize 2 equiv of hydride for reduction. Nitriles consume 1 equiv of hydride rapidly but further hydride uptake is quite slow. Nitro compounds, azobenzene, and azoxybenzene are reduced moderately. Cyclohexanone oxime liberates ca. 0.8 equiv of hydrogen rapidly and is reduced to the N-hydroxylamine stage. Phenyl isocyanate is rapidly reduced to the imine stage, but further hydride uptake is quite sluggish. Pyridine reacts at a moderate rate with an uptake of one hydride in 48 h, while pyridine N-oxide reacts rapidly with consumption of 2 equiv of hydride for reduction in 6h. Similarly, disulfides and sulfoxide are readily reduced, whereas sulfide, sulfone, and sulfonic acid are inert to this reagent under these reaction conditions.