• Title/Summary/Keyword: area-division

Search Result 7,305, Processing Time 0.029 seconds

알칼리 표면개질을 통한 다공성 알루미늄 합금의 하이브리드 기공구조 형성 (The Formation of Hybridized Porous Structure of Al Alloy by Alkali Surface Modification)

  • 서영익;김영문;이영중;김대건;이규환;김영도
    • 한국분말재료학회지
    • /
    • 제16권1호
    • /
    • pp.22-27
    • /
    • 2009
  • To improve the filtration efficiency of porous materials used in filters, an extensive specific surface area is required to serve as a site for adsorption of impurities. In this paper, a method for creating a hybridized porous alloy using a powder metallurgical technique to build macropores in an Al-4 wt.% Cu alloy and subsequent surface modification for a microporous surface with a considerably increased specific surface area is suggested. The macropore structure was controlled by granulation, compacting pressure, and sintering; the micropore structure was obtained by a surface modification using a dilute NaOH solution. The specific surface area of surface-modified specimen increased about 10 times compare to as-sintered specimen that comprised of the macropore structure. Also, the surface-modified specimens showed a remarkable increase in micropores larger than 10 nm. Such a hybridized porous structure has potential for application in water and air purification filters, as well as membrane pre-treatment and catalysis.

저 면적 타원곡선 암호프로세서를 위한 GF(2$^{m}$ )상의 새로운 산술 연산기 (A New Arithmetic Unit Over GF(2$^{m}$ ) for Low-Area Elliptic Curve Cryptographic Processor)

  • 김창훈;권순학;홍춘표
    • 한국통신학회논문지
    • /
    • 제28권7A호
    • /
    • pp.547-556
    • /
    • 2003
  • 본 논문에서는 저 면적 타원곡선 암호프로세서를 위한 GF(2$^{m}$ )상의 새로운 산술 연산기를 제안한다. 제안된 연산기는 바이너리 확장 최대공약수 알고리즘과 MSB(Most Significant Bit) 우선 곱셈 알고리즘으로부터 하드웨어 공유를 통하여 LFSR(Linear Feed Back Shft Register)구조로 설계되었으며, 나눗셈 및 곱셈 모두를 수행 할 수 있다. 즉 나눗셈 모드에서 2m-1 클락 사이클 지연 후 나눗셈의 결과를 출력하며, 곱셈 모드에서 m 클락 사이클 지연 후 곱셈 결과를 각각 출력한다. 본 논문에서 제안된 연산기를 기존의 나눗셈기들과 비교 분석한 결과 적은 트랜지스터의 사용으로 계산 지연시간을 감소 시켰다. 또한 제안된 연산기는 기약다항식의 선택에 어떠한 제약도 두지 않을 뿐 아니라 매우 규칙적이고 묘듈화 하기 쉽기 때문에 필드 크기 m 에 대하여 높은 확장성 및 유연성을 제공한다 따라서, 본 연구에서 제안된 산술 연산기는 타원곡선 암호프로세서의 나눗셈 및 곱셈 연산기로 사용될 수 있다. 특히 스마트 카드나 무선통신기기와 같은 저 면적을 요구하는 응용들에 매우 적합하다.

SATEEC 시스템을 이용한 면적/경사도에 의한 유달률 산정 방법에 따른 유사량 분석 (Analysis of Sediment Yields at Watershed Scale using Area/Slope-Based Sediment Delivery Ratio in SATEEC)

  • 박윤식;김종건;김남원;김기성;최중대;임경재
    • 한국물환경학회지
    • /
    • 제23권5호
    • /
    • pp.650-658
    • /
    • 2007
  • The Universal Soil Loss Equation (USLE) has been used in over 100 countries to estimate potential long-term soil erosion from the field. However, the USLE estimated soil erosion cannot be used to estimate the sediment delivered to the stream networks. For an effective erosion control, it is necessary to compute sediment delivery ratio (SDR) for watershed and sediment yield at watershed outlet. Thus, the Sediment Assessment Tool for Effective Erosion Control (SATEEC) was developed to compute the sediment yield at any point in watershed. In this study, the SATEEC was applied to the Sudong watershed, Chuncheon Gangwon to compare the sediment yield using area-based sediment delivery ratio (SDRA) and slope-based sediment delivery ratio (SDRS) at watershed outlet. The sediment yield using the SDRA by Vanoni, SYA and the sediment yield using the SDRS by Willams and Berndt, SYS were compared for the same sized watersheds. The 19 subwatersheds was 2.19 ha in size, the soil loss and sediment yield were estimated for each subwatershed. Average slope of main stream was about 0.86~3.17%. Soil loss and sediment yield using SDRA and SDRS were distinguished depending on topography, especially in steep and flat areas. The SDRA for all subwatersheds was 0.762, however the SDRS were estimated in the range of 0.553~0.999. The difference between SYA and SYS was -79.74~27.45%. Thus site specific slope-based SDR is more effective in sediment yield estimation than area-based SDR. However it is recommended that watershed characteristic need to be considered in estimating yield behaviors.

여수해만 특정해역의 해상교통시스템 설정에 관한 연구 (A Study on Proposal of the Improved Marine Traffic System for Special Sea Area on Yeosu Bay)

  • 정재용;김철승;정중식;박성현;정대득
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2005년도 춘계학술대회 논문집
    • /
    • pp.205-212
    • /
    • 2005
  • 여수해만의 교통안전특정해역은 1988년에 설정된 이후 선박 입항 척수 및 톤수가 크게 변하는 등 해상교통환경 급격하게 변화된 것에도 불구하고, 통항분리가 되지 않은 채 흘수제약선의 깊은수심항로만 지정되어 있고 흘수제약선 이외의 통항선박들에 대한 항로체계는 미비한 실정이다. 또한 여수해만 입구의 A, B, C, W 묘박지에서 항로로 진입하는 선박과 조업어선 등의 무질서한 운항으로 통항선박의 안전에 지장을 초래하고 있는 실정이다. 본 연구에서는 여수해만 특정해역에 대하여 장래의 교통여건까지 고려하여 도출된 문제점에 대한 개선방안을 강구하는 등 해양사고 예방을 위한 종합적인 해상교통체계 설정에 목적이 있다.

  • PDF

Interannual Variability of Common Squid Fishing Ground in the East Sea derived from Satellite and In-situ Data

  • Kim, Sang-Woo;Ahn, Ji-Suk;Lim, Jin-Wook;Jeong, Hee-Dong;Park, Jong-Hwa
    • 한국환경과학회지
    • /
    • 제22권10호
    • /
    • pp.1363-1371
    • /
    • 2013
  • In this study, we estimate the interannual spatial and temporal distributions of fishing grounds at night in the East Sea based on satellite and in-situ data. We observe that the $15^{\circ}C$ thermal front moves in the north-south direction according to the movement of the warm water (above $18^{\circ}C$) in the Tsushima Warm Current (TWC) area, forcing the cold water area (below $10^{\circ}C$) to either expand or shrink. The interannual variations of sea surface temperature (SST) in winter represented by the indicator SST of $6^{\circ}C$ are consistent with the east-west zonal areas in the central East Sea which represented over $1^{\circ}C$ standard deviation of SST in February during 1990-2000. Annual SST in the fishing grounds of common squid fishing vessels, observed both by fishing vessels and satellites range from 9-$22^{\circ}C$, with the satellite-observed data having a larger range than the fishing vessel-based ones. The interannual distributions of the common squid fishing grounds in the East Sea are mostly concentrated in the TWC area in the southwestern part of the East Sea and in the coast of southern Honshu and Hokkaido in Japan. The interannual distributions of the nighttime fishing vessels are consistent with the catches investigated from the fishing vessel.

WRF-UCM을 활용한 수도권 지역의 열환경 변화 연구: 2000년과 2009년의 비교 (Study on Heat Environment Changes in Seoul Metropolitan Area Using WRF-UCM: A Comparison between 2000 and 2009)

  • 이보라;이대근;남경엽;이영곤;김백조
    • 대기
    • /
    • 제25권3호
    • /
    • pp.483-499
    • /
    • 2015
  • This study examined the impact of change of land-use and meteorological condition due to urbanization on heat environment in Seoul metropolitan area over a decade (2000 and 2009) using Weather Research and Forecasting (WRF)-Urban Canopy Model (UCM). The numerical simulations consist of three sets: meteorological conditions of (1) October 2000 with land-use data in 2000 (base simulation), (2) October 2009 with land-use data in 2000 (meteorological condition change effect) and (3) October 2009 with land-use data in 2009 (both the effects of land-use and meteorological condition change). According to the experiment results, the change of land-use and meteorological condition by urbanization over a decade showed different contribution to the change of heat environment in Seoul metropolitan area. There was about $1^{\circ}C$ increase in near-surface (2 m) temperature over all of the analyzed stations due to meteorological condition change. In stations where the land-use type changed into urban, large temperature increase at nighttime was observed by combined effects of meteorological condition and land-use changes (maximum $4.23^{\circ}C$). Urban heat island (UHI) over $3^{\circ}C$ (temperature difference between Seoul and Okcheon) increased 5.24% due to the meteorological condition change and 26.61% due to the land-use change. That is, land-use change turned out to be contributing to the strengthening of UHI more than the meteorological condition change. Moreover, the land-use change plays a major role in the increase of sensible heat flux and decrease of latent heat flux.

Evaluation of Shiranuhi, a Hybrid of Kiyomi Tangor and Nakano No.3 Ponkan, for Resistance to Citrus Canker in Growth Chamber

  • Myung, Inn-Shik;Hyun, Jae-Wook;Kim, Kwang-Sik;Lee, Seong-Chan;Lim, Han-Cheol
    • The Plant Pathology Journal
    • /
    • 제19권5호
    • /
    • pp.253-256
    • /
    • 2003
  • Citrus canker disease is caused by bacteria Xanthomonas axonopodis .pv. Citri. Shiranuhi cultivar, a hybrid of Kiyomi tangor and Nakano No.3 ponkan was evaluated for resistance to citrus canker based on initiation of disease, percent area of lesion infected and growth rate of bacteria in the leaf under growth chamber condition. Significant differences between susceptible plant and resistant plants were observed in these assays. Resistant plants showed delayed disease symptoms compared to the susceptible plants after spray inoculation of the pathogen. The resistant verities, satsuma, yuzu, and Shiranuhi showed symptoms after six days where as susceptible, mexican lime showed the symptoms just after three days of inoculation. 18 days after inoculation, percent area of lesions developed on leaf and disease severity differed significantly in susceptible and resistant plants, and were ranked as follows: mexican lime > early satsuma =Shiranuhi =yuzu (P <, 0.01). However, 30 days after inoculation, percent area of lesion was further differentiated into resistant and highly resistant plants. That was ranked as follows: sweet orange> early satsuma =Shiranuhi =Kiyomi > yuzu (P < 0.01). These results indicate that host reaction to the bacterial was more distinct when the disease developed for a longer period. Growth rates of a citrus canker bacterium during 16 40 h also were distinct after infiltration into leaves of susceptible and resistant plants, and were ranked as follows: sweet orange> early satsuma =Shiranuhi =Kiyomi =yuzu (P < 0.01). Based on these results, we concluded that Shiranuhi is resistant to citrus canker as compared to Kiyomi, early satsuma, and yuzu.

대면적 미세패턴 롤 금형 가공용 초정밀 롤 선반 개발 (An Ultra-precision Lathe for Large-area Micro-structured Roll Molds)

  • 오정석;송창규;황주호;심종엽;박천홍
    • 한국정밀공학회지
    • /
    • 제30권12호
    • /
    • pp.1303-1312
    • /
    • 2013
  • We report an ultra-precision lathe designed to machine micron-scale features on a large-area roll mold. The lathe can machine rolls up to 600 mm in diameter and 2,500 mm in length. All axes use hydrostatic oil bearings to exploit the high-precision, stiffness, and damping characteristics. The headstock spindle and rotary tooling table are driven by frameless direct drive motors, while coreless linear motors are used for the two linear axes. Finite element method modeling reveals that the effects of structural deformation on the machining accuracy are less than $1{\mu}m$. The results of thermal testing show that the maximum temperature rise at the spindle outer surface is approximately $0.5^{\circ}C$. Finally, performance evaluations of the error motion, micro-positioning capability, and fine-pitch machining demonstrate that the lathe is capable of producing optical-quality surfaces with micron-scale patterns with feature sizes as small as $20{\mu}m$ on a large-area roll mold.

해양도시내 분산전원의 최적 설치점 선정 (Optimal Positioning Algorithm for Distributed Energy Resources near Ocean Side)

  • 박정도;이성환;도근영;성효성;장낙원
    • 한국항해항만학회지
    • /
    • 제33권6호
    • /
    • pp.457-462
    • /
    • 2009
  • 본 논문은 Newton-Rhapson법으로 조류계산을 하여 해양도시내 분산전원의 최적 설치점에 대해 연구하였다. 도시 내에 분산전원을 설치할 경우 대규모 발전소나 송전설비를 추가 건설하지 않고도 효율적으로 필요한 전력을 공급할 수 있는 장점이 있다. 따라서 전 세계적으로 분산전원은 도시 에너지원으로 주목받고 있다. 그러나 도시 내의 전원 설치지점 변경에 따른 전력손실 평가에 대한 연구는 미흡한 실정이다. 따라서 본 논문에서는 분산전원이 주변의 선로에 미치는 전력손실을 최소화 할 수 있도록, 분산전원의 최적 설치지점을 선정하는 방안을 제안한다.

3차원 전기비저항탐사에 의한 카르스트 지역에서의 공동탐지 (Detection of cavities in a karst area by means of a 3D electrical resistivity technique)

  • 박삼규;김창렬;손정술;이명종;김정호
    • 지구물리와물리탐사
    • /
    • 제12권1호
    • /
    • pp.27-32
    • /
    • 2009
  • 이 연구는 한국 남서쪽에 위치한 무안군 용월리의 카르스트 지역에서 지하 공동 탐지를 위하여 3차원 전기비저항탐사의 적용성을 시험한 것이다. 현장 조사지역은 과거에 지반침하가 발생하였으며, 지하 공동은 충적층 하부에 분포하고 있는 석회암내에서 발견된다. 석회암 공동은 대부분 지하수와 점성토로 충진 되어 있기 때문에 주변의 기반암에 비하여 전기비저항이 상대적으로 낮게 나타난다. 이 연구 결과에 의하면 시추공에서 인식되고 있는 공동 분포대가 저비저항대와 일치하고 있으며, 이로부터 3차원 전기비저항탐사가 카르스트 지역에서의 지하 공동을 탐지하고 영상화 하는데 매우 유용함을 입증했다.