• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.spc1
• /
• pp.73-76
• /
• 2006

This study was carried out to investigate the change yield and grain quality in rice caused by damages of brown planthopper (Bph) on major agronomic traits at the ripening stage. A major agronomic traits such as culm length, panicle length, number of panicle and number of grain per panicles was no-significant difference compared hopperburn area (HBA) and moderately damaged area (MDA) by brown planthopper with non-damaged area (NDA). but, the ripeing ratio and yield in HBA and MDA was significantly decreased. The perfect rice of brown rice in HBA and MDA was also lowered than the NDA and the immatured grain among imperfect rice in damaged area by BPH was significantly increased than in the NDA. Among the traits related with palatability of cooked rice, the amylose content was not affected by damage of brown planthopper, whereas, the protein content was significantly increased in the HBA and MDA. additionally, Peak viscosity in HBA and MDA is lower than the NDA, and setback was increased. In most cases, there was negative on yield and grain quality by the damage of brown planthopper at the ripening stage. Thus, the rice product harvested in damaged area should be separated with that in non damaged area for grain market quality of milled rice.

• Journal of Environmental Health Sciences
• /
• v.47 no.2
• /
• pp.131-143
• /
• 2021

Objectives: This study aims to investigate the atmospheric concentration of polycyclic aromatic hydrocarbons (PAHs) and volatile organic compounds (VOCs) and the urinary concentration of biomarkers in residents near the Shinpyeong·Jangrim Industrial Complex to compare them with those of residents in a control area. Methods: Hazardous air pollutants (PAHs and VOCs) were measured in an exposure area (two sites) and a control area (one site). Urine samples were collected from residents near the industrial complex (184 persons) and residents in the control area (181 persons). Multiple linear regression analysis was used to identify which factors affected the concentration of PAHs and VOCs metabolites. Results: The average atmospheric concentration of PAHs in Shinpyeong-dong and Jangrim-dong was 0.45 and 0.59 ppb for pyrene, 0.15 and 0.16 ppb for benzo[a]pyrene, and 0.29 and 0.35 ppb for dibenz[a,h]anthracene. The average atmospheric concentration of VOCs was 1.10 and 0.99 ppb for benzene, 8.22 and 11.30 ppb for toluene, and 1.91 and 3.05 ppb for ethylbenzene, respectively. The concentrations of PAHs and VOCs in residents near the Shinpyeong·Jangrim Industrial Complex were higher than those of residents in the control area. Geometric means of urinary 2-hydroxyfluorene, 1-hydroxypyrene, methylhippuric acid, and mandelic acid concentrations were 0.45, 0.22, 391.51, and 201.36 ㎍/g creatinine, respectively. Those levels were all significantly higher than those in the control area (p<0.05). In addition, as a result of multiple regression analysis, even after adjusting for potential confounding factors such as gender and smoking, the concentration of metabolites in urine was high in residents near the Shinpyeong·Jangrim Industrial Complex. Conclusion: The results of this study show the possibility of human exposure to VOCs in residents near the Shinpyeong·Jangrim Industrial Complex. Therefore, continuous monitoring of the local community is required for the management of environmental pollutant emissions.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.134-134
• /
• 2022

Mungbean is used for not only seed but sprout, so, consumption of mungbean has been on the rise in Korea. Life cycle of mungbean tends to be short among Legume. For that reason, Mungbean can be harvested for various cropping system and season per regions and farmers regardless of sowing date and harvesting date. So, Prior research is needed about growth characters and life cycle of mungbean per sowing period. Mungebean cultivar 'Dahyun' and 'Sanpo' supplied by Korea Agriculture Technology Promotion Agency(KOAT) is cultivated in wagner pot. Sowing period is proper time of seeding in Jeollanam-do and Gyeongsangnam-do that is major cultivation region of mungbean in korea from early May to mid July every 2 weeks. Length at maturity stage tends to increase from early May(sowing date: 4^th May) to early July(sowing date: 5^th July), but after that, It tends to decrease from mid July(sowing date: 19^th July). Number of branches and nods shows a similar trend. Length of pod has no tendency and no difference per sowing date. Number of pod per plants has also no tendency per sowing date. Test plots sowing in late May has the most number of pods.(Sanpo 22.9pods, Dahyun 16.8) Number of seeds per pod tends to increase to late May and Test plots sowing in mid July has the most number of seed per pod. In case of sowing at early May, Days of emergence is 7d. its summation of temperature is 132.2℃. After that, it tends to decrease to mid June. After mid June, Days of emergence is fixed to 3d. Average temperature growing up in this season, Summation of temperature from sowing to emergence takes the lowest point in test plots sowing in mid June.(Sanpo 88.6℃, Dahyun 88.6) Days of flowering tends to fasten from early May to mid July. Two cultivar shows same level. Days of maturity tends to fasten to mid June, after that tends to slow. In case that many research results about growth characters and life cycle mungbean per sowing period are drawn, it is expected that it result in increase of cultivation area and income of farmer.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.515-518
• /
• 2005

LiDAR(Light Detection and Ranging) with digital aerial photograph can be used to measure tree growth factors like total height, height of clear-length, dbh(diameter at breast height) and crown projection area. Delineating crown is an important process for identifying and numbering individual trees. Crown delineation can be done by watershed method to segment basin according to elevation values of DSMmax produced by LiDAR. Digital aerial photograph can be used to validate the crown projection area using LiDAR. And tree height can be acquired by image processing using window filter$(3cell\times3cell\;or\;5cell\times5cell)$ that compares grid elevation values of individual crown segmented by watershed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1085-1088
• /
• 2007

A new DC-DC converter was designed for gate driver circuit using low temperature poly-Si TFT technology. To achieve high efficiency and small area, we proposed a cross-coupled type DC-DC converter which converts 5V of input voltage to 9V of output voltage and supplies 120$\mu$A of current to load. Its efficiency is 92.9% and the area is reduced as much as 19% compared to the previously reported latch type DC-DC converter.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.1206-1211
• /
• 2010

Soil-cement, a hardened mixture of Portland cement, soil, and water that contain sufficient durability, has been widely utilised in Seoul urban construction sites to retain lateral earth pressures or reinforce grounds. However, little information has been reported about the strength characteristics of soil-cement constructed in Seoul urban area. In this study, we performed a number of unconfined test to the soil-cements mixed from soils sampled in 3 sites in Seoul urban area. Results indicate that unconfined strengths and optimum cement amounts of soil-cements are highly dependent on the proportion of coarse-grain particles of mixed soils. Furthermore, changes of unconfined strengths with curing time are diverse with respect to mixing conditions.

• Korean Journal of Metals and Materials
• /
• v.48 no.3
• /
• pp.241-247
• /
• 2010

In order to develop the vacuum distillation process of magnesium alloy scrap, a fundamental study on the evaporation behavior of magnesium alloy (AM50) scrap melt was carried out. Melt temperature, pressure, reaction time, and initial specific surface area of melt were considered as experimental variables. The evaporation rate of magnesium increased with the increase of melt temperature and initial specific surface area of melt, and with the decrease of the pressure. The activation energy of magnesium evaporation reaction calculated by an Arrhenius plot decreased with the decrease of the pressure and with the increase of the initial specific surface area of melt. An empirical equation was derived for the evaporation rate of magnesium from AM50 alloy melt.

• Asian Journal of Atmospheric Environment
• /
• v.11 no.4
• /
• pp.235-253
• /
• 2017

This study was conducted for analyzing the contribution factors on ozone concentrations and its long term trends in each major city and province in Korea through several statistical methods such as simple linear regression, generalized linear model, KZ-filer, correlation matrix, Kringing method, and cluster analysis. The overall ozone levels in South Korea have been consistently increasing over the past 10 years. The ozone concentrations in Seoul, the biggest city in Korea, are the lowest in all areas with the highest increasing ratio for $95^{th}%$ ozone. It is thought that the active photochemical reaction could affect the higher ozone concentration increase. On the other hand, the ozone concentrations in Jeju are the highest in Korea with the highest increasing ratio for $5^{th}%$, $33^{th}%$, and $50^{th}%$ ozone. It is also thought that the weak $NO_x$ titration could be the reason of higher ozone concentrations in Jeju. In case of Jeju, transport related factors is the major factor affecting the ozone trend. Thus, it is assumed that the variation of ozone trend of Asian region affecting the ozone trend in Jeju, where domestic ozone photochemical reaction is less active than urban area. It is thought that the photochemical reaction plays the role of increasing of ozone concentrations in the urban area, even though the LRT affected on the increase of ozone concentrations in non-urban area.

• Journal of the Mineralogical Society of Korea
• /
• v.29 no.1
• /
• pp.23-34
• /
• 2016

Tsogttsetsii area, an intrusive complex associated with Cu porphyry mineralization, is located in the Gurvansaikhan island arc terrane of the Central Asian Orogenic belt, Southern Mongolia. We performed a reconnaissance survey in Tsogttsetsii area. Cu mineralization in Tsogttsetsii area is porphyry Cu type related with alkali granite intruded in Permian. Mineralogical and textural properties of the ores and associated minerals were analyzed using X-ray diffraction, thin section petrography, and Scanning electron microscopy-Energy dispersive spectroscopy (SEM-EDS). Ore minerals identified in polarizing microscope are magnetite, pyrite and bornite. Propylitic alteration zone occurs broadly in the area where malachite occurrences are shown to be spread intensively in alkali granite area. Quartz, sericite, chlorite and epidote were observed in the alteration zone samples. As results of XRD and SEM-EDS analysis, samples of copper oxides were composed mainly of malachite, cuprite and small amounts of quartz. Average and maximum Cu contents of samples collected from malachite occurrences area are 759 ppm and 6190 ppm, respectively. The characteristics of mineralization in Tsogttsetsii area is similar to Oyu Tolgoi Cu-Au (Mo) deposit and Tsagaan Suvarga Cu-Mo deposit which are 56 km south and 120 km northeast from Tsogttsetsii area, respectively. Characteristics of the study area, such as the geology, tectonic environment, lithology, mineralization, and alterations of the rocks within the survey area, resemble the characteristics of other porphyry deposits. Therefore further exploration including Induced Polarization (IP) survey for identifying subsurface orebody is required.

• Journal of Environmental Impact Assessment
• /
• v.22 no.5
• /
• pp.455-466
• /
• 2013

The aim of this study is to seek application plans of National Ecosystem Survey database based on comparison and examination of feasible analysis methods for distribution characteristics of alien plants. In order to set up a correlation analysis method between alien plants and environmental factors, we had reviewed the 3rd National Ecosystem Survey guide book and consequently, two kinds of analysis method were tested. One was 1/25,000 scale map boundary based analysis and the other was representative mountain area based analysis. In this study we restricted the research area to select reliable surveyed database from whole "2011 National Ecosystem Survey flora database" according to two major criteria. First, an area defined by 1/25,000 scale map boundary and representative mountain area where the number of surveyed flora records should be within top 20%. Second, land cover map should also be built up inside that area. As a result, 25 map boundaries and 25 representative mountain areas were extracted to be analyzed. To limit a boundary for every representative mountain area we had analyzed distribution of environmental factors around that area by manual inspection with SPOT-5 remote sensed satellite image then designated 3km buffer zone from each alien plant location in that area. After then, naturalized index (NI) and urbanized index (UI) was calculated and correlations analysis was carried out. With the result of correlation analysis by map boundary only agricultural land area showed significant value of r (0.4~0.6, correlated) and the rest of factors did not. In the case of representative mountain area, the result showed that agricultural land, road and forest area showed significant value of r (0.6~0.8, highly correlated) which was corresponding to existing researches. Therefore, representative mountain area based method is preferable when using the alien plants database of National Ecosystem Survey for species distribution analysis. And also, considering the way of database utilization is strongly suggested at the first stage of survey planning for promoting active use of national ecosystem survey database.