• Title/Summary/Keyword: area sampling

Search Result 1,819, Processing Time 0.028 seconds

A Study on Indoor Radon Concentrations in Urban Area (도시 일부지역에서의 실내 라돈농도에 관한 연구)

  • 김순애;백남원
    • Journal of Environmental Health Sciences
    • /
    • v.28 no.2
    • /
    • pp.89-98
    • /
    • 2002
  • This study was taken in general hospital, hotel, shopping center, underground cafe, school, house, for the purpose of investigating the distribution of indoor radon concentration in urban area, by E-PERM which approved U.S. EPA, between August and November 1999. There are two sampling Places were exceed 148 ㏃/㎥(4 pCi/L; U.S EPA remedial level), difference mean is 24.0㏃/㎥ when compared with underground vs. aboveground indoor radon concentration in the same building and ratio is 1.6, so underground area is higher than aboveground (p<0.05). Influencing factors were examined. They related to the location of sampler(detector) open or near the door is lower radon concentration than inside portion, which explains probably open area has better ventilated air and dilutes indoor radon concentration. Temperature has a negative relationship (p<0.05) with indoor radon concentration and relative humidity has a positive (p<0.05) Simultaneously to investigate water radon concentration, collected piped-water and the results were very low, which is the same in piped-water concentration other countries. In conclusion, underground indoor radon concentration is higher than aboveground. Concentration was related to sampling spot, open portion is lower than inside. Higher the temperature, lower the indoor radon concentrations. On the other hand higher the relative humidity, higher the indoor radon concentrations. Indoor radon concentration is influenced by sampling point, temperature, relative humidity.

Estimation of the Number of the Unemployed Using Small Area Estimation Methods (소지역 추정방법을 이용한 실업자 수 추정 사례연구)

  • Kwon, Se-Hyug
    • Survey Research
    • /
    • v.10 no.1
    • /
    • pp.141-154
    • /
    • 2009
  • With the current sampling scheme, the sampling variance is getting larger in producing smaller regional statistics than the designed area, The larger sample size can make the variance reduced but the efficiency of sample survey lower. The desired confidence level of sampling survey can be obtained using the current sample scheme with the same sample size and administrative data. In this paper, the number of the unemployed of 5 regions in Daejon are estimated using small area estimation methods and the CV values in each estimation method is calculated and compared for their estimation efficiency as empirical study. Jackknife method is proposed to estimate the MSE of synthetic estimator and composite estimator more accurately.

  • PDF

Improvement of Detailed Soil Survey Guidance through the New Site Classification System and Reinforcement of Exploratory Soil Survey (조사 대상 부지 신규 분류 체계 제안 및 개황조사 강화를 통한 토양정밀조사 방법 개선 연구)

  • Kwon, Ji Cheol;Lee, Goontaek;Hwang, Sang-il;Kim, Tae Seung;Yoon, Jeong-Ki;Kim, Ji-in
    • Journal of Soil and Groundwater Environment
    • /
    • v.20 no.7
    • /
    • pp.53-60
    • /
    • 2015
  • This study suggested the new site classification system according to land use, type of contamination and contaminants. Because the present site classification system can not cover all the areas, we changed the concept of land use to more detail one and enlarged the concept of other areas to cover all the areas not defined as certain land use. In case of the present industrial area, it was merged as other areas to avoid the confusion with oil and toxic material storage tank farm area. Accident area was separated from other areas and defined as only accident area caused by the mobile storage facility. In addition to classify the sites according to the basic land use, we classify the sites again in lower level according to the type of contamination and contaminants. With this classification system, we proposed different soil sampling strategy with the consideration of the origin of contamination and the interactions between soil and contaminants. We removed the surface soil sample (0~15 cm depth) around above storage tank because it was not a effective sample to assess whether that area contaminated or not. We also proposed to take the deeper soil samples at minimum three sampling points to confirm the depth of contamination in exploratory soil survey. We also proposed to remove the one point of 15 m depth sampling because it is not effective to confirm contaminated soil depth and needs the exhausted labor and cost. Instead of doing this, we added the continuous sampling to uncontaminated subsoil. Soil sampling points and depth in detailed soil survey is determined based on the results of exploratory soil survey. Therefore, effectiveness and reinforcements of exploratory soil survey would play an important role in improving the reliability of detailed soil survey.

SAMPLING ERROR ANALYSIS FOR SOIL MOISTURE ESTIMATION

  • Kim, Gwang-Seob;Yoo, Chul-sang
    • Water Engineering Research
    • /
    • v.1 no.3
    • /
    • pp.209-222
    • /
    • 2000
  • A spectral formalism was applied to quantify the sampling errors due to spatial and/or temporal gaps in soil moisture measurements. The lack of temporal measurements of the two-dimensional soil moisture field makes it difficult to compute the spectra directly from observed records. Therefore, the space-time soil moisture spectra derived by stochastic models of rainfall and soil moisture was used in their record. Parameters for both models were tuned with Southern Great Plains Hydrology Experiment(SGP'97) data and the Oklahoma Mesonet data. The structure of soil moisture data is discrete in space and time. A design filter was developed to compute the sampling errors for discrete measurements in space and time. This filter has the advantage in its general form applicable for all kinds of sampling designs. Sampling errors of the soil moisture estimation during the SGP'97 Hydrology Experiment period were estimated. The sampling errors for various sampling designs such as satedlite over pass and point measurement ground probe were estimated under the climate condition between June and August 1997 and soil properties of the SGP'97 experimental area. The ground truth design was evaluated to 25km and 50km spatial gap and the temporal gap from zero to 5 days.

  • PDF

Determination of the Optimum Sampling Area for the Benthic Community Study of the Songdo Tidal Flat and Youngil Bay Subtidal Sediment (송도 갯벌과 영일만 조하대 저서동물의 군집조사를 위한 적정 채집면적의 결정)

  • Koh, Chul-Hwan;Kang, Seong-Gil;Lee, Chang-Bok
    • The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
    • /
    • v.4 no.1
    • /
    • pp.63-70
    • /
    • 1999
  • The optimum sampling area which can be applied to the benthic community study is estimated from large survey data in the Songdo tidal flat and subtidal zone of Youngil Bay, Korea. A total of 250 samples by 0.02 $m^2$ box corer for the benthic fauna in Songdo tidal flat and 50 samples by 0.1 $m^2$ van Veen grab in Youngil Bay were taken from the total sampling area of 5 $m^2$. It was assumed that the sampling area could contain sufficient information on sediment fauna, if cumulative number of species, ecological indices, and similarity index by cluster analysis reflect the similarity level of 75% to those found at total sampling area (5 $m^2$). A total of 56 and 60 species occurred from Songdo tidal flat and Youngil Bay, respectively. The cumulative curve of the species number ($N_{sp}$) as a function of the sampling area (A in $m^2$ ) was fitted as $N_{sp}=37.379A^{0.257}$ ($r^2=0.99$) for intertidal fauna and $N_{sp}=40.895A^{0.257}$ ($r^2=0.98$) for subtidal fauna. Based on these curves and 75% of similarity to the total sampling area (5 $m^2$), the optimum sampling area was proposed as 1.6 $m^2$ for the intertidal and 1.5 $m^2$ for the subtidal fauna. Ecological indices (species diversity, richness, evenness and dominance indices) were again calculated on the basis of species composition in differently simulated sample sizes. Changes in ecological indices with these sample sizes indicated that samplings could be done by collecting fauna from < 0.5 $m^2$-1.5 $m^2$ on the Songdo tidal flat and from < 0.5 $m^2$-1.2 $m^2$ in Youngil Bay. Changes in similarity level of all units of each simulated sample size showed that sampling area of 0.3 $m^2$ (Songdo tidal flat) and 0.6 $m^2$ (Youngil Bay) should be taken to obtain a similarity level of 75%. In conclusion, sampling area which was determined by cumulative number of species, ecological indices and similarity index by cluster analysis could be determined as 1.5 $m^2$ (0.02 $m^2$ box corer, n=75) for Songdo tidal flat and 1.2 $m^2$ (0.1 $m^2$ van Veen grab, n=12) for Youngil Bay. If these sampling areas could be covered in the field survey, population densities of seven dominant species comprising 68% of the total faunal abundance occurring on Songdo tidal flat and six species comprising 90% in Youngil Bay can be estimated at the precision level of P=0.2.

  • PDF

A Study on the Contents of Soluble Sulfur and Heavy Metals in the Leaves of the Roadside Tree in Seoul Area (서울시내 가로수목의 수용성유황 및 중금속 함량에 관한 연구)

  • 김면섭;이광국
    • Journal of Korean Society for Atmospheric Environment
    • /
    • v.4 no.1
    • /
    • pp.1-12
    • /
    • 1988
  • This study was carried out to measure the contents of soluble sulfur and heavy metals in the leaves of roadside tree at 34 sampling sites of Seoul area from the Sep. 1 to Sep. 30 during 1985 and 1986. The results were as follows; 1. Average contents of soluble sulfur at all sampling sites were; Plantanus orientalis 0.474%, Ginkgobioloba 0.562%, and Salix pseudolasiogyne 0.566%. 2. Correlation between sulfur dioxide concentration in the air and soluble sulfur in the leaves by area were; Green belt area R = 0.985, Residential area R = 0.856, Commercial area R = 0.668, Industrial area R = 0.886. Correlation by species were ; Platanus orientalis R = 0.817, Ginkgobiloba R = 0.771, Salix pseudo-lasiogyne R = 0.824. 3. Correlation between $SO_X$ concentration in the air and sulfur contents in the leaves showed positive significance. 4. Contents of soluble sulfur in the heavy traffic area were higher than that of light traffic area. 5. Heavy metal contents of 1986 were higher than that of 1985; Fe> Mn > Zn > Pb > Cu > Cd > Cr. 6. Lead contents in the leaves of 1986 were; Platanus orientalis 16, 701 ppm, Gingobiloba 21,729ppm, Salix Pseudo-lasiogyne 12.418 ppm.

  • PDF

Effect of Thin Wall Tube on Clay Soil Disturbance during Sampling (점성토 시료추출관이 시료교란에 미치는 영향)

  • Eam, Sung-Hoon
    • Journal of The Korean Society of Agricultural Engineers
    • /
    • v.51 no.5
    • /
    • pp.51-58
    • /
    • 2009
  • The total recovery ratio test on undisturbed clay soil sampling in the field and the finite element method analysis on modified static state of penetration process were conducted for the purpose of deciding the most important factor among the shape factors of thin wall tube. The adhesion between tube wall and soil did not decrease although internal clearance ratio of tube increased within the little change of tube area ratio. The most part of disturbance occurred in the tip of sampling tube during the penetration. The longitudinal displacement was larger than the lateral displacement because soil was confined laterally after being entered into tube, and also the longitudinal displacement was larger in the upper part of the sample tube than in the lower part.

지하수 함양량 추정시 공간상에서의 자료 sampling 방법에 따른 Minimum Entropy Deconvolution의 적용성에 관한 검토

  • Kim Tae-Hui;Kim Yong-Je;Lee Gang-Geun
    • Proceedings of the Korean Society of Soil and Groundwater Environment Conference
    • /
    • 2005.04a
    • /
    • pp.139-142
    • /
    • 2005
  • Kim and Lee(2005) suggested Minimum Entropy Deconvolution(MED) to estimate the temporal sequence of the relative recharge. However this study by Kim and Lee(2005) was just related to the verification of the conceptual approach with MED. In this study, we try to characterize the applicability of MED in the case of spatially heterogeneous recharge (distance from recharge area). Simulated results were recorded with some specific sampling points. Estimated results from this study show higher than 0.8 in cross-correlation with the original recharge sequence.

  • PDF

Redesigning KNSO s Household Survey Sample (통계청 가구부문 조사의 표본설계)

  • 윤연옥;김규영;이명호
    • Survey Research
    • /
    • v.5 no.1
    • /
    • pp.103-130
    • /
    • 2004
  • Main monthly household surveys conducted by Korea National Statistical Office are economically active population survey(EAPS) and household income and expenditure survey(HIES). Samples of these two surveys are redesigned every 5 years based on Census. This paper is about sample redesign of household survey conducted in 2002 based on 2000 Census. Main improvements of 2002 sample redesign are the introduction of rotation sampling system, the expansion of HIES survey area from urban to whole country and the foundation of basement to make small area estimation for the unemployment statistics. Also the number of sample households within a enumeration district(ED) is reduced from 24 to 20. That makes it possible to select more ED samples which provides better precision for EAPS and HIES. To select representative samples for the population, different classification index is used for each metropolitan area and provinces.

  • PDF