• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2000년도 춘계 학술대회 논문집 통권 3호 Proceedings of the 2000 KSRS Spring Meeting
• /
• pp.49-54
• /
• 2000

Conventional methods for measuring winds provide wind velocity observations over limited area and time period. The use of satellite imagery for measuring wind velocity overcomes some of these limitations by providing wide area and near condinuous coverage. And its accurate depiction is essential for operational weather forecasting and for initialization of NWP models. GMS-5 provides full disk images at hourly intervals. At four times each day - 0500, 1100, 1700, 2300 hours UTC-a series of three images is received, separated by thirty minutes, centered at the four times. The current wind system generates winds from sets of 3 infrared(IR) images, separated by an hour, four times a day. It also produces visible(VIS) and water vapor(WV) image-based winds from half-hourly imagery four times a day. The derivation of wind from satellite imagery involves the identification of suitable cloud targets. tracking the targets on sequential images, associating a pressure height with the derived wind vector, and quality control. The aim of this research is to incorporate imagery from other available spectral channels and examine the error characteristics of winds derived from these images.

• 한국소음진동공학회논문집
• /
• 제14권7호
• /
• pp.632-638
• /
• 2004

In order to evaluate the effect of blasting vibration in buildings and it's resident located around blasting construction field in urban area, blasting vibration characteristics were measured by the vibration level, vibration velocity. The 250g and 750g of charged powder were used at the apartment and at the ground, respectively. In the measurement of the ground, 2 (perpendicularity) axis was the highest value in vibration level, but vertical direction was the highest value at 25 m point and longitudinal direction was the highest value at 50 m point in vibration velocity. The amount of measurement was high value when measuring point is higher than blasting source, while that of measurement was low value when measuring point is lower than blasting source. In the measurement of the apartment, Z axis was the highest value in vibration level, but in vibration velocity transverse direction was the highest value at ground, was vertical direction at 1st floor, was longitudinal direction at 3rd floor and was vertical and longitudinal direction at 5th floor. The vibration level and the vibration velocity of 50 m point showed higher correlation value than 25 m point at the ground, but those of 25 m point showed higher correlation value than 50 m point at the apartment.

• 비파괴검사학회지
• /
• 제28권1호
• /
• pp.1-8
• /
• 2008

본 연구는 내압과 압축이 동시에 작용하는 오링의 변형 거동을 측정하기 위한 시험 기법을 개발하기 위함이다. 오링변형측정치구는 고압에서도 변형되지 않으며 오링변형측정치구 내의 두 곳에 홈을 파서 각각의 홈 안에 오링을 장착하도록 설계하였고 내압에 의한 오링의 압출 길이를 측정하기 위해 1 mm 및 0.1 mm의 압출 틈을 제작하였다. 오링의 변형 형상을 정확히 측정하기 위하여 선속경화현상 보정, 히스토그램 분석 및 불감대 영역 보정을 실시하였으며, 계면반응함수와 선확산함수를 이용하여 오링의 변형 길이를 측정하였다. 전산화 단층촬영은 22.3%의 압착상태에서 0, 1.378, 4.902, 9.804, 15.692 MPa의 압력을 가하여 실시하였으며, 각각의 압력에서 오링의 확장 지름, 접촉 길이 및 압출 길이를 측정하였다. 전산화 단층촬영의 측정 결과를 검증하기 위하여 유한요소법으로 오링의 변형 형상을 해석하였고, 수치해석법으로 실제 오링의 면적과 전산화 단층촬영에서 얻은 오링의 면적을 상호 비교하였다.

• 마이크로전자및패키징학회지
• /
• 제30권3호
• /
• pp.88-93
• /
• 2023

고대역폭 메모리(HBM)에 대한 수요가 증가하고 직경이 더 큰 웨이퍼의 핸들링 기술이 발전함에 따라 본딩 웨이퍼의 두께 균일성에 대해 신뢰성을 확보할 수 있는 측정 방법이 요구되고 있다. 본 연구에서는 300mm 웨이퍼를 대상으로 웨이퍼의 전 영역에 대해 TTV를 측정할 수 있는 모듈을 설계 제직하고, 측정 모듈의 설계를 바탕으로 발생할 수 있는 측정 오차를 분석하였으며, 웨이퍼의 처짐과 척의 기구적 오차를 고려한 모델 해석을 통해 예측된 기울기 값에 따른 측정 오차를 추정하였다. TTV 측정 모듈은 웨이퍼 지지를 위한 센터 척과 리프트 핀을 활용하여 웨이퍼의 전체 영역에 대해 측정이 가능하도록 하였다. 모달 해석을 통해 모듈의 구조적 안정성을 예측하였으며, 구동부와 측정부 모두 100Hz 이상의 강성을 갖는 것을 확인하였다. 설계된 모듈의 측정 오차를 예측한 결과 두께 1,500um의 본딩 웨이퍼를 측정할 경우 예측된 측정 오차는 1.34nm로 나타났다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1990년도 춘계학술대회
• /
• pp.43-46
• /
• 1990

Modern society is prevailed a lot of allergies. So, the allergy test is very important. There are many kinds of allergy test. A doctor usually uses skin allergy test among many allergy tests. However, little standadization and objectivity of grading-standard has been established in the skin allergy test. A measurement of the reaction area has been a major objective to perform skin allergy test. Recently, a doctor's method is to measure the reaction area after drawing a line that represents the reaction area on the skin. But this method differs slightly from the real reaction area and individual doctor's measurement is different, because the edge of the reaction area is obscure. In this paper, we propose a algorithm which is able to detect vague edges using the fuzzy set. The algorithm that detects the line and curve is proposed first. Here, the maximum value is calculated by comparing the membership function of the line and curve seperately. We also encode the direction of the line and curve by using 8-direction code. Then, we calculate the reaction area by measuring the pixels which are inside the reaction area. And finally the Allergy grade is decided by grading-standard, and we accomplish faster, the 80re accurate and objective allergy grade decision.

• 한국환경과학회지
• /
• 제5권1호
• /
• pp.7-14
• /
• 1996

Two experiments were conducted to evaluate breathing zone air quality in Taegu, using automatic analyzers for four air quality standards($SO_2$, $NO_2$, CO, and $O_3$). First, air target compounds were measured for 8 to 12 hours in each of two commercial areas and five residential areas. Second, air target compounds were hourly measured for 24 hours in each of two commercial areas, two residential areas, and an industrial complex area. Based on the first experiment the breathing zone air was more polluted in the commercial area as compared to the residential area, while the second experiment showed that the breathing zone air was polluted rather in the residential are3 as compared to the commercial area. The second experiment also indicated that there was some variation of breathing zone air concentration with time and measuring sites. Diurnal variation of breathing zone air concentrations was consistent with previous studies which measured at building height. The highest breathing zone air concentration was shown in Seongseo industrial complex area. An unusual finding of this study was that $SO_2$ concentration in the breathing zone air of Bisandong, a typical residential area of Taegu, was higher than that of other residential areas, even higher than that of Seongseo industrial complex area.

• 대한인간공학회지
• /
• 제26권1호
• /
• pp.71-77
• /
• 2007

Shoe's size and shape are determined by the last that takes shape of foot because last is the mold of shoe in development and manufacturing process. Then adaptation between foot and shoe is dependent on the last. In mass shoe production, model size is developed in the first place, other sized lasts are made through the grading process based on model size. The most important factor in grading system is grading deviation that must be same amount induced from foot measuring database. At present, most of the last manufacturing companies in korea using 260mm as a standard foot model size. When length grading deviation is 5mm, the ball girth grading deviation is 3.7mm and the ball width grading deviation is 1.2mm. I verified existing grading system by comparing grading results with foot measuring data. Also, I proposed reasonable grading deviation and application method of grading system. From the analysis of foot measuring database, reasonable grading deviations are 1.22mm in ball width and 0.84mm in ankle height in case of length grading deviation is 5mm. I confirmed that the current grading system is very accurate. When we grade last from 230mm to 290mm by current grading system based on model size 260mm, there is grading error over 1mm in the front outside area of foot. This error level of 1mm is no problem in normal walking shoe's last, but it induces adaptation problems in sports and special purposed shoe's last. Therefore using of three standard model size is recommended in grading men's last for reducing grading deviation error under the level of 1mm. It is specifically described as 235mm in 225-245mm, 260mm in 250-270mm, 285mm in 275-295mm. According to the above recommended grading system, it is enough to measure only three foot sizes in case of foot measuring project for men's last development.

• 대한치과보철학회지
• /
• 제45권5호
• /
• pp.687-695
• /
• 2007

Statement of problem: The proper contact relation between adjacent teeth in each arch plays an important role in the stability and maintenance of the integrity of the dental arches. Proximal contact has been defined as the area of a tooth that is in close association, connection, or touch with an adjacent tooth in the same arch. Purpose: The aim of this study was to develop a digital device for measuring the proximal tooth contact tightness by pulling a thin stainless steel strip (2mm wide, 0.03mm thick) inserted between proximal tooth contact. Material and method: This device consists of measuring part, sensor part, motor part and body part. The stainless steel strip was connected to a stain gauge. The strain gauge was designed to convert the frictional force into a compressive force. This compressive force was detected as a electrical signal and the electrical signal was digitalized by a A/D converter. The digital signals were displayed by a micro-processor. The pulling speed was 8mm/s. Results: For testing reliability of the device in vivo, two healthy young adults (A, B) participated in this experiment. The tightness of proximal tooth contact between the second premolar and the first molar of mandible (subject A) and maxilla (subject B) was measured fifteen times for three days at rest. We double-checked the accuracy of the device with a Universal Testing Machine. Output signals from the Universal Testing Machine and the measuring device were compared. Regression analysis showed high linearity between these two signals. In vivo test, no significant differences were found between measurements. Conclusion: This device has shown to he capable of producing reliable and reproducible results in measuring proximal tooth contact. Therefore, it was considered that this device was appropriate to apply clinically.

• 항공우주기술
• /
• 제6권1호
• /
• pp.74-82
• /
• 2007

일정한 샘플링 시간 T마다 발생되는 반작용 휠 타코 펄스의 개수를 세어 구동기의 회전 속도를 측정하는 M 방식은 구현이 간단하고 측정 시간이 일정하다는 장점이 있으나, 저속에서 속도 측정의 해상도가 나빠진다는 단점이 있다. 그에 반해, 펄스와 펄스 사이의 시간 간격을 측정하는 T방식은 저속에서 정밀한 속도를 측정할 수 있으며 측정에 따른 시간 지연이 적다는 장점이 있다. 그러나 이 방법 역시 실제 구현 시 나눗셈이 필요하고 속도 측정 시간이 속도에 따라 가변되는 문제점이 있다. 현재 산업계에서는 전동기의 속도를 측정하기 위하여 M방식과 T방식을 조합한 M/T방식이 널리 사용되고 있지만, 현재 위성 분야에서는 M방식과 T방식중 하나만을 사용하고 있는 실정이다. 그럼으로, 저궤도 위성에서 핵심 구동장치로 사용되는 반작용 휠의 속도를 측정하기 위해서, 기존의 M 방식의 속도 측정방식에 저속에서의 속도 정확도 향상을 위하여 T 방식도 이용해서 속도 측정을 하려한다. 본 연구에서는 이러한 측정 요구조건을 만족할 수 있도록 지상 시험 장비인 위성동역학 시뮬레이터에서 반작용 휠의 모사를 위한 보드 설계를 제시하려 한다.

• Journal of Periodontal and Implant Science
• /
• 제28권2호
• /
• pp.309-320
• /
• 1998

The periodontal health has been evaluated clinically by various epidemiological indices, and in researches by measurement of gingival crevicular fluid. Laser Doppler flowmetry is a reliable and objective method that allows immediate measurement of erythrocyte flux in approximately one cubic mm of the capillary bed without disturbing the tissues. The purpose of the present study was to determine whether human gingival blood flow was different according to measuring area, measuring time, and sex or not. Forty volunteers with good general and periodontal health, aged early twenties and unmarried, were selected. Laser Doppler flowmetry($floLAB^{(R)}$, Moor Instruments Ltd., England) was applied to measure the gingival blood flow of marginal gingiva, interdental papilla, attached gingiva and alveolar mucosa. The blood flow of interdental papilla was measured at 9-10 AM, 1-2 PM, and 5-6 PM. The difference of blood flow according to measuring area and measuring time was statistically analyzed by one way AOVA and Dunkan test, and the difference of blood flow between men and women was statistically analyzed by t-test. (1) Mean blood flow was significantly higher in alveolar mucosa than in the gingiva(p<0.05), and there was no significant difference in blood flow between marginal gingiva and interdental papilla(p>0.1). (2) Mean blood flow was significantly higher at 5-6 PM than at 9-10 AM and 1-2 PM(p<0.05). But there was no significant difference in gingival blood flow between 9-10 AM and 1-2 PM(p>0.1). (3) There was no significant difference in gingival blood flow between men and women(p>0.1). The above results suggest that the measurment of gingival blood flow using laser Doppler flowmetry may be clinically applicable to early determination of gingival inflammation and evaluation of healing status, but further studies are necessary to standardize and simplify the measuring procedure.