• 제목/요약/키워드: area measurement

검색결과 3,996건 처리시간 0.026초

시민과학 활동에 참여한 초등학생들의 과학 관련 정의적 특성 및 측정에 대한 인식 분석 (A Study on Science-related Affective Characteristic and Perception of Measurement of Elementary Students Who Participated in Citizen Science Activities)

  • 신정윤;박상우
    • 한국초등과학교육학회지:초등과학교육
    • /
    • 제39권2호
    • /
    • pp.168-182
    • /
    • 2020
  • This study investigated how elementary students' science-related affective characteristics and their perception of measurement changed following participation in citizen science activities through a GLOBE program. Before and after the activities, test of positive experiences about science (PES) and perception of measurement were conducted with twelve fourth grade students. In addition, the teacher who participated in the GLOBE program with students observed and recorded the students' involvement, conversation and behavior to qualitatively analyze the value of the program and the students' perceptions of measurement. After the end of the program, an open questionnaire was conducted to fill any gaps in these observations. The results showed that citizen science activities had a positive impact on elementary students' science-related affective characteristics. In all areas of PES test, the post-test scores were higher than the pre-test results, and a statistically significant difference was seen in the 'science learning motivation' area. Furthermore, students' perception of the value and meaning of measurements was seen to deepen through ongoing global environmental data measurement activities. And their understanding of various units of measurement and numerous situations in which they might need to make measurements was also elaborated.

브래지어와 허리거들에 있어서 의복압 측정부위 선정에 관한 연구 (Selection of the Measurement Points for the Garment Pressure of the Brassier and the Waist-Nipper)

  • 백윤정;최정화;이경숙
    • 한국지역사회생활과학회지
    • /
    • 제18권3호
    • /
    • pp.445-453
    • /
    • 2007
  • This study was to select the measurement points for the brassier and the waist-nipper. 15 subjects (ages 30-40) were chosen by % body fat to represent various physical types. Subjects put on each garment, brassier and a waist-nipper, in turns. Measurement points in the underwear were selected according to the parts of human body. The characteristics and surface area of each garment was considered carefully when the measurement points were selected. Selected measurement points on a brassier and a waist-nipper were chosen from the anterior midsagittal line, the side-seam line, and the posterior midsagittal line. Three points on the brassier and three points on the waist-nipper were selected as the measurement points. There was a highly significant correlation between % body fat and mean garment pressure. There were no significant relationships between thickness of subcutaneous fat and mean garment pressure by measured parts.

  • PDF

Bluetooth 모듈을 이용한 KWP2000 차량 ECU신호의 원격 계측 (Remote Measurement of the Automobile′s ECU Signals with KWP2000 using Bluetooth Module)

  • 최광훈;권대규;이성철
    • 한국정밀공학회지
    • /
    • 제21권10호
    • /
    • pp.86-93
    • /
    • 2004
  • This paper presents the remote measurement of the ECU signals adopted with KWP 2000 protocol using the wireless communication technique of bluetooth. The bluetooth technology will be the most promising network paradigm which can open the new area in the information technology. Especially, bluetooth module is able to link all the electrical products and personal computers to cellular phone or PDA. This research has a try to design a wireless measurement model of ECU signal based on the car telemery system using bluetooth device. In order to measure the ECU signals, we designed the interface circuits which is able to communicate between the ECU system and the terminal circuits according to the ISO, SAE regulation of communication protocol standard. A microprocessor S3c341 OX is used for the system control and communication of ECU signals. The embedded system software is programmed to measure the ECU signals using the ARM compiler and ANCI C based on Micro/OS-II kernel to communicate between two bluetooth modules using bluetooth stack. The remote measurement of ECU signals using the bluetooth was designed and implemented to evaluate the performance of wireless network to the transmit measurement data. The possibility for the remote measurement of the self diagnosis signals of ECU adopted with KWP2000 protocol verified through the developed systems and algorithms in embedded system.

거들과 올인원의 의복압 측정부위 선정에 관한 연구 (Selection of the Measurement Points for Garment Pressure of the Girdle and the All-in-one)

  • 백윤정;최정화
    • 한국지역사회생활과학회지
    • /
    • 제18권4호
    • /
    • pp.609-616
    • /
    • 2007
  • This study was to select the measurement points of the girdle and the all-in-one. 15 subjects (age 30-40) were chosen by % body fat to represent various physical types. Subjects tried on each garment; a girdle and a all-in-one, in turns. Measurement points in the underwear were selected according to the parts of the human body. The characteristics and the surface area of the each garment were considered carefully when the measurement points were selected. Selected measurement points on the girdle and the all-in-one were chosen from the anterior midsagittal line, the side-seam line, and the posterior midsagittal line. Four points on the girdle and four points on the all-in-one were selected as the measurement points. There was highly significant correlation between % body fat and mean garment pressure. There was no significant relationship between thickness of subcutaneous fat and mean garment pressure by measured parts.

  • PDF

구산동 아파트 재개발 사업의 발파공법 선정 및 주변 가옥에 미치는 발파 진동.소음 영향에 관한 연구 (On the Selected Blasting Method and Measurement of Vibration and Sound Level by Blasting in KU-SAN area.)

  • 강대우
    • 화약ㆍ발파
    • /
    • 제16권3호
    • /
    • pp.16-24
    • /
    • 1998
  • Methods of Rock fragmentation are used rock of housing repair development at KU-SAN DONG area in seoul Youn-Pyong Ku. So, Theorical analyses of the effect of vibration and frequency on structural damage around old housed also discussed. The results can be summarized as follows: 1. A area(Rock area not more than 15m Ku-San Mention) Some Empirical equations were obtained $V=K\{{\frac{D}{W}}1/3\}^{-n}$ where the values for n and K are estimated to be -1.64 and 94 respectively, this values were obtained only theorical analyses. If we have 125g charge this area is impossible blasting operation, so this area must be worked by SRS(Super Rock Splitter) method. 2. B area(Rock area from 15m to 25m in a boundary line from Ku-San Mention) This area charge is about 125g in a delay time by some empirical equation s. So, this area can be blasting operations by small charge. 3. C area(Rock area from 25m to 35m in a boundary line from Ku-San Mention) This area charge is about 500g in delay time by some empirical equation s. So, this area can be blasting operations by middle charge. 4. D area(Rock area more then 35m in a boundary line from Ku-San Mention) This area charge is about 1000g in a delay time by some empirical equation s. So, this area can be blasting operations by middle charge.

  • PDF

Measurement and analysis of tractor emission during plow tillage operation

  • Jun-Ho Lee;Hyeon-Ho Jeon;Seung-Min Baek;Seung-Yun Baek;Wan-Soo Kim;Yong-Joo Kim;Ryu-Gap Lim
    • 농업과학연구
    • /
    • 제50권3호
    • /
    • pp.425-436
    • /
    • 2023
  • In Korea, the U.S. Tier-4 Final emission standards have been applied to agricultural machinery since 2015. This study was conducted to analyze the emission characteristics of agricultural tractors during plow tillage operations using PEMS (portable emissions measurement systems). The tractor working speed was set as M2 (5.95 km/h) and M3 (7.60 km/h), which was the most used gear stage during plow tillage operation. An engine idling test was conducted before the plow tillage operation was conducted because the level of emissions differed depending on the temperature of the engine (cold and hot states). The estimated level of emissions for the regular area (660 m2), which was the typical area of cultivation, was based on an implement width of 2.15 m and distance from the work area of 2.2 m. As a result, average emission of CO (carbon monoxide), THC (total hydrocarbons), NOx (nitric oxides), and PM (particulate matter) were approximately 6.17×10-2, 3.36×10-4, 2.01×10-4, and 6.85×10-6 g/s, respectively. Based on the regular area, the total emission of CO, THC, NOx, and PM was 2.62, 3.76×10-2, 1.63, and 2.59×10-4 g, respectively. The results of total emission during plow tillage were compared to Tier 4 emission regulation limits. Tier 4 emission regulation limits means maximum value of the emission per consumption power (g/kWh), calculated as ratio of the emission and consumption power. Therefore, the total emission was converted to the emission per power using the rated power of the tractor. The emission per power was found to be satisfied below Tier 4 emission regulation limits for each emission gas. It is necessary to measure data by applying various test modes in the future and utilize them to calculate emission because the emission depends on various variables such as measurement environment and test mode.

지형자료의 해상도와 공간보간기법에 따른 다차원 수리모형의 유출 특성 평가 (An Assessment on the Hydraulic Characteristics of a Multi-dimensional Model in Response to Measurement Resolution and Spatial Interpolation Methods)

  • 안정민;박인혁
    • 대한공간정보학회지
    • /
    • 제20권1호
    • /
    • pp.43-51
    • /
    • 2012
  • 수변공간 및 수자원에 대한 효율적 활용 요구가 증대됨에 따라 하천의 수리적인 특성을 보다 정밀하게 모의하고 이를 활용한 의사결정이 필요하다. EFDC 모형은 이러한 의사결정을 지원하기 위한 다차원 수리모형으로 3차원 정밀지형을 활용하여 수체의 수리적인 특성을 분석할 수 있다. 그러나 EFDC 모형의 입력자료로 활용되는 3차원 정밀지형의 경우, 측량간격과 지형보간기법에 의해 많은 영향을 받게 되며 3차원 정밀지형의 변화에 따라 대상 수체의 수리적인 특성이 영향을 받게 된다. 이에 본 연구에서는 다른 측량간격 및 지형보간기법에 따라 도출된 3차원 정밀지형이 EFDC 모형의 모의결과에 미치는 영향을 검토하였다. 연구 대상지역은 낙동강 금호강 유입구간이며, 검토 사상은 2006년 강우사상에 대한 수치모의를 수행하고, 면적-고도 곡선, 수위 및 유속의 모의결과를 비교 분석하였다. 분석결과, 동일한 측량 간격에서는 지형보간기법에 따른 면적고도곡선의 차이는 크지 않았으나, 측량 간격이 160m에서 모든 보간기법에서 차이가 발생하였고 측량간격이 80m 이상이 되면 하상단면의 변화가 발생하였다. 또한, 수위의 경우에 Kriging을 제외한 나머지 기법은 해상도에 따른 차이가 크지 않았고, Kriging은 160m 측량간격에서 다른 기법에 비해 차이가 크게 나타났다. 유속의 경우, 80m 측량간격이상에서 각 보간기법별 차이가 나타나기 시작했으며 160m 측량간격에서 Kriging은 다른 보간기법과 큰 차이를 보이는 것으로 나타났다.

축소형 항공기 모델의 레이다 단면적 분석 및 측정에 대한 연구 (A Study on the Measurement and the Analysis of Radar Cross Section of the Scaled Aircraft Model)

  • 김기중
    • 한국전자통신학회논문지
    • /
    • 제15권6호
    • /
    • pp.1055-1060
    • /
    • 2020
  • 본 연구는 축소형 항공기의 레이다 단면적 분석 및 측정에 대한 연구이다. 사전에 축소형 항공기에 대한 레이다 단면적 특성을 전자기 해석 툴을 사용하여 분석하고 실제 축소형 항공기를 제작하여 무반사실에서 측정하였다. 측정 시 구모델을 사용하여 RCS 특성의 기준 데이터로 적용하여 실제 축소형 모델의 시험 결과 데이터에 적용하였다. 측정 방법은 시간 게이팅을 적용하여 무반사실 내부에서 산란되는 성분에 대한 영향을 제거하여 측정의 정확성을 향상시켰다. 축소형 모델의 RCS 시험 결과는 사전 해석 결과와 같이 초단파 대역에서 상대적으로 RCS 특성이 높게 측정되었다. 향후 본 연구를 통하여 파장이 상대적으로 큰 VHF/UHF 대역 레이다의 표적에 대한 RCS 분석 및 측정에 대한 특성 기술에 활용할 예정이다.

사용자의 디자인 요구 분석에 의한 보육시설 실외놀이환경 디자인 유형화 (Classification of the Playground Environment Design in Child Care Center according to User Needs Analysis)

  • 최목화;변혜령
    • 한국생활과학회지
    • /
    • 제17권4호
    • /
    • pp.661-677
    • /
    • 2008
  • The purpose of this study is to develop the playground environment model for child care center by analyzing user needs of playground environment. To systemize the playground environment design factors and guidelines, we reviewed the previous research, actual measurement and observation were used as the research methodology. And to recognize the needs of users, the survey and picture survey was conducted to the staffs and children. The scope of survey included child care centers in Seoul and Daejeon, ultimately selecting 12 places in Seoul and 13 places in Daejeon. In terms of the survey period, actual measurement was conducted from June of 2006 to February of 2007, survey and picture survey was conducted from August to September of 2006. For analysis, we used SPSS 10.0 to check the frequency and percentage, as well as to perform cluster analysis. The findings of research can be summarized as below: 1. In playground environment, we observed the area of play ground and ground cover, the independence of play area, play equipment, and the composition of play area. The result of observation showed that while playground area varied widely, ground cover, play equipment, and the composition of play area turned out to be identical, regardless of the playground's area. Therefore, in order to classify various playground environments, we categorized them into 5 types, using the number of children and the area of play ground as a category. Type A had large facilities and small playground area. Type B had small sized facilities and large playground area. Type C had medium sized facilities and small playground area. Type D had medium sized facilities but large playground area. Type E had large sized facilities and large playground area. 2. On the other hand, staffs wanted a tunnel, playhouse, comprehensive play equipment, and a maze to be installed as play facilities, and there were requests for adventure play area and carpenter play area. The picture survey to children showed that they wanted equipments that can provide more thrill, adventure and challenge to them than the ones they see now. Therefore, existing child care center play environments must change from the monotonous and identical environments to the ones that can provide diversities, challenges, and adventures. In the contexts of 5 playground types suggested by this research, type B and D, E where the area of playground were larger than the legally required, should include various play areas and install appropriate play equipments and facilities. Type A and C where the area were small, should provide multipurpose play area to attract the various play behaviors of children.

산림과 도심에서의 조망 및 보행활동이 인체의 생리·심리에 미치는 효과 (Physiological and Psychological Effects of Viewing and Walking in Forest and Urban Area)

  • 지경배;김경남;한갑수
    • 한국환경과학회지
    • /
    • 제21권5호
    • /
    • pp.605-611
    • /
    • 2012
  • The purpose of this study is to analyze psychological and physiological effects accordance with viewing and walking in the forest and urban area. In the result of measurement of physiological reactions in nervous system, viewing of the forest had a calming effect on the nervous system by reducing blood pressure and heart rate. The other hand, viewing and walking in the urban area compared to the forest area raised stress by increasing blood pressure and heart rate. In addition, viewing in forest area was effective in stress relief by noticeable reduction of the amylase concentration. In contrast, walking in the urban area was also confirmed an increase of stress by increasing the concentration of the amylase. A viewing and walking in forest area was effective in alleviating depressed on anxiety, anger, fatigue and confusion.