• Journal of Magnetics
• /
• 제21권4호
• /
• pp.577-585
• /
• 2016

In this paper, model of the axial-flux permanent magnet synchronous generator (AFPMSG) having arc-shaped trapezoidal permanent magnets (PM) is presented. The proposed model reduces the cogging torque and torque ripple, at the expense of lowering the average output torque. Optimization of the proposed model is performed by considering the asymmetric overhang configuration of the PMs, as to make the output torque of the proposed model competitive with the conventional model. The time stepped 3D finite element analysis (FEA) is performed for the comparative analysis. It is demonstrated that the torque ripple of the optimized model is highly reduced as well as average output torque is increased.

• Smart Structures and Systems
• /
• 제34권3호
• /
• pp.145-156
• /
• 2024

Pendulum tuned mass damper with eddy current damping (EC-PTMD) is a promising TMD device for vibration control of structures. Previous study focused primarily on the plate-like configuration of EC-PTMD, which motion of inertial mass is approximately horizontal. However, uneven distribution of damping force, non-constant damping and low energy efficiency will be resulted. This study developed a newly assembled pendulum tuned mass damper with constant eddy current damping (AEC-PTMD) in the form of arc. The proposed AEC-PTMD consists of a rigid suspension with sufficient lateral stiffness to keep inertial mass motion in a plane, the conductor plate fixed on the baseplate, and arc-shaped back iron acted as inertial mass placed on two sides of conductor plate. Meanwhile, the arc-shaped permanent magnets (PMs) are embedded into both sides of back iron to overcome the normal attraction and enhance greater magnetic density. Based on the Biot-Savart Law, the analytical expressions of magnetic flux distribution for arc-shaped PM are derived and assessed. Meanwhile, the effect of ferromagnetic media on magnetic flux distribution of arc-shaped PM is analyzed, which utilized a parameterization formula for the distance from the surface of the PM to a point outside. Further, the 3D finite element model (FEM) of an AEC-PTMD unit is established to evaluate the accuracy of the analytical results. A prototype of the proposed AEC-PTMD unit has been fabricated and laboratory experiments are conducted for the purpose of validating analytical and FEM results. All of these results have a good agreement.

• 소성∙가공
• /
• 제8권2호
• /
• pp.135-142
• /
• 1999

Tube Process(TP) is one of the processes to produce permanent magnets. Advantage claimed for this process is that it can accmplish both densification and anisotropication in one step forming. This process is distinguished from other processes since it uses deformable tube for densification of powder magnets. TP has, however, difficulties in manufacturing permanent magnets from Nd-Fe-B green powder due to folding resulted from large height reduction and localized densification. Therefore, an adequate preform is necessary to reduce folding resulted from large height reduction and localized densification. Therefore, an adequate preform is necessary to reduce folding, lead magnets into almost desired final shape and get uniform densification. In this paper, preform design for TP is carried out without a deformable tube to investigate the behaviour of magnet sinter-forging. Preform design is accomplished to increase the effective magnet area with a near net shape and uniform densification.

• Journal of Magnetics
• /
• 제16권4호
• /
• pp.374-378
• /
• 2011

Axial Field Permanent Magnet (AFPM) generators are widely applied for the small wind turbine because of the higher power density per unit weight than that of the conventional radial field generator. It is caused by the disc shaped rotor and the stator structures. The generally used AFPM generator, AFER-NS generator, is composed of the two side's external rotors and non-slotted stator without stator core. However, the output voltage and the output power are limited by the large reluctance by the long air-gap flux paths. In this paper, the design study of AFIR-S generator having double side's slotted stator core is accomplished to improve the output generation characteristics. The electromagnetic design analysis and the design improvement of the suggested AFIR-S generator are studied. Firstly, the electromagnetic design analysis was done to increase the power density. Secondly, the design optimizations of the rotor pole-arc ratio of permanent magnet are accomplished to increase the output power and to reduce the cogging torque. Finally, the output performances of AFER-NS and AFIR-S generator are compared with each other. For this study, 3D FEA is applied for the design analysis because of three dimensional electromagnetic structures.

• 항공우주시스템공학회지
• /
• 제12권2호
• /
• pp.1-6
• /
• 2018

위성의 자세제어 구동기에 사용되는 직접구동 모터(BLDC Motor)의 영구자석 자속밀도 분포 불균일은 위성 토크 리플을 발생시켜 자세에 지대한 영향을 미친다. 본 논문은 이러한 토크 리플을 줄이기 위해 영구자석의 형상, 배치, 공극에 따른 자속밀도를 이론과 유한요소법 시뮬레이션을 통하여 분석하고 가장 적합한 자석 형상조합을 찾고자 한다. 사각형과 아치형, 단일 자석 배치와 듀얼자석 배치형상의 자속밀도 성능비교를 통해 최적의 자석 배치형상을 구하였으며, 이의 검증을 위해 시제품 모터(Protype Motor) 제작을 통하여 성능을 검증하였다.