• The Journal of Engineering Geology
• /
• v.3 no.2
• /
• pp.101-114
• /
• 1993

GIS technique was applied to identify the regional hydrologic units for groundwater exploitation and recharge analysis in a study area. The technique was very effective to identify the potential areas for groundwater exploitation, and for groundwater management & land use planning. GIS database of environmental resources was complied from a variety of sources and scales as the foundation for analysis, including digitizing and scanning of hardcopy maps. A DEM(Digital Elevation Model) was used to dassify slopes, and identify problematic drainage system. Quantitative analysis of environmental resources helps us to develop the scoring system of GIS model, which evaluates each resource in relation to the others and reflects the relative importance of each resource. ARC4NFO was used to construct digital database, and the cartographic simulation techniques were applied in order to create new maps.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.51 no.5
• /
• pp.242-248
• /
• 2002

It is important to develop new effective technologies to increase the interruption capacity and to reduce the size of a UB(Gas Circuit Breakers). Major design parameters such as nozzle geometries and interrupting chamber dimensions affect the cooling of the arc and the breaking performance. But it is not easy to test real GCB model in practice as in theory. Therefore, a simulation tool based on a computational fluid dynamics(CFD) algorithm has been developed to facilitate an optimization of the interrupter. Special attention has been paid to the supersonic flow phenomena between contacts and the observation of hat-gas flow for estimating the breaking performance. However, there are many difficult problems in calculating the flow characteristics in a GCB such as shock wave and complex geometries, which may be either static or in relative motion. Although a number of mesh generation techniques are now available, the generation of meshes around complicated, multi-component geometries like a GCB is still a tedious and difficult task for the computational fluid dynamics. This paper presents the CFD program using CFB-CAD integration technique based on Cartesian cut-cell method, which could reduce researcher's efforts to generate the mesh and achieve the accurate representation of the geometry designed by a CAD tools.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.4
• /
• pp.567-572
• /
• 1998

The crystalline structure of $LaTi_{0.8}V_{0.2}O_3$ solid solutions, prepared by arc-melting palletized mixtures of predried $La_2O_3,\;V_2O_3,\;TiO_2$, and Ti, was investigated by transmission electron microscopy and computer image simulation. Computer image simulations were performed by the multislice method for a wide range of sample thickness and defocusing value. The structure of $LaTi_{0.8}V_{0.2}O_3$ was determined as a $GdFeO_3$-type orthorhombic $(a\approx5.58{\AA},\;b\approx7.89{\AA},\;and\;c\approx5.58{\AA})$ with a space group $P_{nma-}$. No evidence of ordering of Ti and V atoms in $SaTi_{0.8}V_{0.2}O_3$ was found.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1678-1682
• /
• 2009

IRWMS(Integrated Real time Water Management System)은 우리나라의 수자원 운영환경에 부합하도록 하천유역에 수자원 통합관리 개념을 도입한 실시간 물관리 의사결정지원 시스템이다. 국내 기술로 개발하여 실무에 적용함으로써 수자원 이용 효율을 극대화하고 선진국 수준의 수자원 관리기술을 확보하기 위한 방안으로 개발되어졌다. 이러한 물관리 시스템 구축을 위해서는 통합 유역에 적합한 모형의 선택과 이수, 치수, 수질 관리 모델의 통합 방안, 해당 유역특성을 반영한 시스템 구성 방법, 각각의 모형의 입,출력 자료의 관리 및 실무에 적용하기 용이한 GUI 구성 등을 고려하여야 한다. 물관리 시스템은 GIS 기반의 해석모형과 웹기반의 정보, 지식 전달 시스템, 수문자료 관리를 위한 DB시스템 등으로 구성되어져 있으며 SOBEK, RIBASIM, MIKE BASIN, WEAP 등 다양한 물관리 시스템들은 각각의 개발 시기나 쓰임에 따라 해석모형과 DB의 사용유무 등 여러 기능들을 차별화하여 구성하고 있다. RIBASIM(RIver BAsin SIMulation)의 경우 다양한 해석모형 들을 각각의 과정에 따라 사용하고 있으며 CMT(Case Management tool), CAT(Case Analysis Tool)라 불리는 기능들을 통하여 각각의 과정을 순차적으로 진행하고 분석하고 있으며 자사의 수문DB관리 프로그램, 수질, GIS도구 등과 연동하여 사용되고 있다. MIKE BASIN의 경우 ArcGIS의 EXTENSION으로 강력한 GIS기능과 비쥬얼한 화면 구성을 그 특징으로 가지고 있다. IRWMS는 강우유출모형과 댐군 저수지 연계 운영모형, 수질모형으로 구성되어져 있으며 DB와의 연동을 통하여 실시간으로 의사결정자들이 의사결정을 지원하며 실무진 중심의 GUI구성을 통하여 실용성을 중심에 두었다. IRWMS는 금강, 낙동강의 구축사례에서 보듯이 실시간 운영으로 수자원 관리 실무진의 사용에 그 주안점을 두었지만 차후 범용화와 상기에서 언급한 여러 국내외 시스템들의 장점을 받아들인다면 각각의 유역특성에 맞는 다양한 활용으로 수자원기술의 선진화에 크게 기여를 할 것이다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.2
• /
• pp.303-312
• /
• 2009

In this paper, we design and fabricate a disk sector antenna fed by CPW fur UWB communications. Also, we insert a rectangular slit on the arc-edge of the disk sector antenna. Then, the antenna has the directivity of E-면. In order to design the antenna, the input impedance is matched with the feed line of $50{\Omega}$ as varying the physical antenna parameters, which are the radius, the flare angle of disk sector, the length of ground, and the length of ground comer near by feed tine. Dimension of the antenna designed for UWB communication is $72mm{\times}26mm$ and bandwidth through computer simulation is $3{\sim}13GHz$. From the measured results, the bandwidth is $1.98{\sim}11GHz$. Return loss and gain of the fabricated antenna are -50.38dB, 1.34dBi at 3.5GHz, -12.27dB, 3.35dBi at 5.5GHz, -23.2dB, 3.8dBi at 8GHz and -16.17dB, 5.2dBi at 10GHz, respectively.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.3
• /
• pp.245-253
• /
• 2008

A precise description of the material is a key point to obtain reliable results when using wave propagation codes. In the case of multipass welds, the material is very difficult to describe due to its anisotropic and heterogeneous properties. Two main advances are presented in the following. The first advance is a model which describes the anisotropy resulting from the metal solidification and thus the model reproduces an anisotropy that is correlated with the grain orientation. The model is called MINA for modelling anisotropy from Notebook of Arc welding. With this kind of material model1ing a good description of the behaviour of the wave propagation is obtained, such as beam deviation or even beam division. But another advance is also necessary to have a good amplitude prediction: a good quantification of the attenuation, particularly due to grain scattering, is also required as far as attenuation exhibits a strong anisotropic behaviour too. Measurement of attenuation is difficult to achieve in anisotropic materials. An experimental approach has been based both on the decomposition of experimental beams into plane waves angular spectra and on the propagation modelling through the anisotropic material via transmission coefficients computed in generally triclinic case. Various examples of results are showed and also some prospects to continue refining numerical simulation of wave propagation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.8
• /
• pp.94-102
• /
• 2002

Since it would be almost impossible to recover and/or repair the satellite in space once it has been launched, a detailed analysis and design, manufacturing using the high quality workmanship, and qualification and acceptance tests in space-simulation environments are necessary for all satellite components prior to launch. Even though these efforts arc made, the failure can still occur. Therefore, redundancy should be considered in the satellite design for continuous operations in preparation for part or equipment failure. In this paper, the reliability analysis of the transponder, which is a payload of Communications & Broadcasting Satellite being developed by ETRI, was performed and compared for various design cases with different redundancies to find the optimal design. The optimal design has been finalized by investigating how the redundant components are composed from the viewpoint of technical performance measures, such as reliability, cost, schedule, and mass.

• Journal of Korean Ophthalmic Optics Society
• /
• v.4 no.2
• /
• pp.1-16
• /
• 1999

Differential equations and its numerical solution program using Turbo-C were formulated to describe the radical distribution and average displacement amplitude of vibrating dehydrated contact lens(HEMA) driven by sinusoidal or rectangular pressure. The natural resonant frequency of the lens diaphram(thickness 0.08mm, diameter 14mm, curvature radius 8mm) was measured to be 5730 Hz from the extrapolation of frequency vs addedmass to the diaphram curve. The Young's modulus of the lens was measured to be $4{\times}10^9$ Pa with altering the original shape. The effect of parameters such as thickness, effective radius, damping coeff., amplitude of driving pressure on the vibration characteristics was illustrated by the computer simulation of the derived program. When the frequency of driving pressure coincides with the integral multiple of fundamental resonance frequency of the lens the wave pattern changes from arc to bell-shape along the radial position of the diaphram. If this happens to the contact lens on the cornea in vivo, it might create the feel of pull of the lens due to the increased rise of central part of the lens.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.661-667
• /
• 2002

Welding-induced buckling distortion is one of the most problematic concerns in both design and fabrication of welded thin-plate structures. This paper deals with experimental and numerical results of the welding-induced longitudinal and/or buckling distortion occurring in welding of 6mm-thick AH36 high strength steel plates. Effects of the heat input and the plate size on the distortion were experimentally evaluated for square plates. Bead-on-plate welding was performed with the submerged arc welding process along the middle line of plate specimens. Experimental results showed that the longitudinal distortion made a single curvature in the plate, and the distortion magnitude along the weld centerline was proportional to the heat input and the plate size. The experimental results were used to examine the validity of the numerical simulation procedure for welding-induced distortion where the longitudinal distortion mode and magnitude were numerically quantified. Three-dimensional, large deformation, welding simulations were performed for selected weld models. Numerical results of the distortion mode and magnitude were in a good agreement with experimental ones. Depending on the presence of halting the distortion growth during the cooling cycle of welding, the condition discriminating buckling distortion from longitudinal distortion was established. Eigenvalue analyses were performed to check the buckling instability of tested plates with different sizes subjected to different heat inputs. The perturbation load pattern for the analysis was extracted from longitudinal inherent strain distributions. Critical buckling curve from the eigenvalue analyses revealed that the buckling instability is manifested when plate size or heat input increases.

• Journal of IKEEE
• /
• v.2 no.1 s.2
• /
• pp.15-23
• /
• 1998

In this paper, distributed mixer is studied at microwave frequency. The circuit of distributed mixer composed of gate 1,2, drain transmission lines, matching circuits in input and output terminal, DGFET's. For impedance matching of input and output port at higher frequency, image impedance concept is introduced. In distributed mixer, a DGFET's impedances are absorbed by artificial transmission line, this type of mixer can get a very broadband characteristics compared to that of current systems. A RF/LO signal is applied to each gate input port, and are excited the drain transmission line through transcondutance of the DGFET's. The output signals from each drain port of DGFET's added in same phases. We designed and frabricated the distributed mixer, and a conversion gain, noise figure, bandwidth, LO/RF isolation of the mixer are shown through computer simulation and experimentation.