• East Asian mathematical journal
• /
• v.30 no.3
• /
• pp.355-360
• /
• 2014

Let D be a finite digraph with the vertex set V (D) and the arc set A(D). A function f : $V(D){\rightarrow}\{-1,\;1\}$ defined on the vertices of a digraph D is called a bad function if $f(N^-(v)){\leq}1$ for every v in D. The weight of a bad function is $f(V(D))=\sum\limits_{v{\in}V(D)}f(v)$. The maximum weight of a bad function of D is the the negative decision number ${\beta}_D(D)$ of D. Wang [4] studied several sharp upper bounds of this number for an undirected graph. In this paper, we study sharp upper bounds of the negative decision number ${\beta}_D(D)$ of for a digraph D.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.4
• /
• pp.87-92
• /
• 2007

The full automation welding has not yet been achieved partly because the mathematical model for the process parameters of a given welding task is not fully understood and quantified. Several mathematical models to control welding quality, productivity, microstructure and weld properties in arc welding processes have been studied. However, it is not an easy task to apply them to the various practical situations because the relationship between the process parameters and the bead geometry is non-linear and also they are usually dependent on the specific experimental results. Practically, it is difficult, but important to know how to establish a mathematical model that can predict the result of the actual welding process and how to select the optimum welding condition under a certain constraint. In this paper, an attempt has been made to develop an neural network model to predict the weld top-bead height as a function of key process parameters in the welding. and to compare the developed models using three different training algorithms in order to select an adequate neural network model for prediction of top-bead height.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.4
• /
• pp.326-331
• /
• 2000

We have fabricated the field emitter arrays coated with diamond-like carbon (DLC) films that improved the field emission characteristics. The nitrogen doped DLC films are prepared by the filtered cathodic vacuum are (FCVA) tehnique. The activation energy of the nitrogen doped DLC films are derived from electrical conductivity measurements. The silicon field emission arrays (FEAs) were prepared by the VLSI technique. The turn-on field was rapidly decreasing and the emission current was remarkably increasing the DLC-coated FEAs than the non-coated silicon FEAs. In the nitrogen doped FEAs, the turn-on field decreased and the emission current increased with increasing the nitrogen found out the field emission current and the work function of the DLC-coated FEAs was remarkably decreased than that of the non-coated silicon FEAs. As nitrogen doping concentrations are increased the work function of FEAs is decreased and the field emission properties are improved in nitrogen doped DLC-coated FEAs. This phenomenon in due the fact that the Fermi energy level moves to the conduction band by increasing nitrogen doping concentration.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.825-830
• /
• 2004

A numerical analysis based on two-dimensional and three-dimensional incompressible Navier-Stokes equations has been carried out for double-circular-arc (DCA) compressor cascades. Two types of double-circular-arc cascades were used in this analysis. The appropriate turbulence model for compressor analysis was selected among the conventional turbulence models such as Baldwin-Lomax, k-$\varepsilon$ and k-$\varepsilon$ models. The results of current study were compared with available experimental data at various incidence angles. The 2-D and 3-D computational codes based on SIMPLE/PWIM algorithm for collocated grid and hybrid scheme for the convective terms were the main features of numerical tools. As commonly known, turbulence modeling is very important for the prediction of cascade flows, which are extremely complex with separation and reattachment by adverse pressure gradient. For selection of turbulence model, 2-D analysis was performed. And then, k-$\varepsilon$ turbulence model with wall function chosen as the reasonable turbulence model for 3-D calculation was used to increase the efficiency of computation times. A reasonable result of 3-D flow pattern passing through the double-circular-arc cascade was obtained.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2002.10a
• /
• pp.273-276
• /
• 2002

Watershed boundary and stream network can be extracted from DEM(Digital Elevation Model) using GIS software such as ARC/INFO or ArcView Spatial Analyst. However, there exist many errors in the generated watershed boundary and stream network just by operating sink removal function of the present software. This paper present the error reducing method to delineate watershed boundary and generate stream network especially in plane areas by using stream burning techniques known as Fillburn and Agree bum. These preprocessing techniques of DEM dramatically decreased the errors comparing with the results by no-bum DEM.

• Proceedings of the KIPE Conference
• /
• 2014.11a
• /
• pp.109-110
• /
• 2014

신재생에너지의 신뢰성 및 효율의 발전과 함께 컴퓨터 및 각종 디지털 부하의 증가로 인하여, 효과적인 DC 에너지 공급 시스템을 위한 연구가 진행되고 있다. 그중 DC 전원의 경우, 아크 발생과 누설전류 검출이 중요한 문제가 된다. 본 연구에서는 반도체 소자를 사용하여 아크가 발생하지 않게 하는 콘센트에, 누설 감지 감도는 8mA, 감지 시간은 120ms 이내의 누설 전류 검출 기능을 보강한 DC 콘센트를 제안한다.

• Electrical & Electronic Materials
• /
• v.11 no.10
• /
• pp.32-39
• /
• 1998

Electrical breakdown strength of paper-oil and polypropylene/film-oil insulation samples was measured under dc, ac and pulsating voltages. The latter was obtained by superimposing ac upon dc volate and provides an attractive method for a simultaneous testing and assessment of the state of insulation of the various parts of HV apparatus in service. The measurements were carried out over a wide range of the pulsation ratio defined as p=Eac/Edc. The results obtained under pulsating voltages follow colsely an experssion which relates the breakdown strength to the sum of arc tangent and arc cotangent function of the parameter p. The study was carried out using dry paper as well as paper containing various degrees of moisture. The presence of moisture showed a pronounced effect upon the breakdown strength which varied with the pulsation parameter p.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.857-860
• /
• 1999

It is made possible a removal of the preamble for carrier recovery and symbol-timing recovery by storing a burst in memory with low overhead QPSK demodulation and this demodulation method also effects frame efficiency improved by processed synchronization performance. In this paper, we have proposed that new algorithm for arc-tangent look-up table which transform the input I, Q data by phase. This I, Q data plays an important role in demodulation and makes demodulator with low-overhead by storing a burst in memory. To evaluate proposed new algorithm and symbol-timing recovery method, function simulation and timing verification have been done by using synopsys VHDL tool.

• Transactions of Materials Processing
• /
• v.10 no.2
• /
• pp.130-136
• /
• 2001

The mathematical set-up model was developed to reduce the mechanical property deviation in annealed and slightly rolled steel strip. The mechanical peculiarities of skin pass rolling process, such as high friction value and non-circular contact arc, low reduction and non-negligible entry and exit elastic zones as well as central restricted deformation zone are all taken into account. The deformation of work rolls is calculated with the influence function method and arbitrary contact arc shape is permitted. The strip deformation is modeled by slab method and the entry and exit elastic deformation zones are included. The strip restricted deformation zone near the neutral point is also considered. It was revealed that the new model has better accuracy than present regression model by statistical analysis with actual mill rolling data.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.273-275
• /
• 1997

We fabricated the conventional silicon tips coated with a diamond-like carbon (DLC) film. The DLC films are prepared by the filtered cathodic vacuum arc (FCVA) technique. With increasing nitrogen content in DLC film, the work function($\phi$) and the turn-on voltage decrease and the emission current increases. This phenomenon is due to the fact that the Fermi-level moves to the conduction band by increasing nitrogen doping concentration. We have tested on the stability of the DLC film coated silicon tip during 2 hours at 500V.