• Proceedings of the KIEE Conference
• /
• 2002.11d
• /
• pp.144-146
• /
• 2002

The latest development flow of MCCB(Molded Case Circuit Breaker) is largely separated from which are high capability of interrupting compact of size and multi-ability in functions. As follow of development of industrial system. MCCB which are including communication function and having a ultimate interrupting capability is required in electrical system. to attain an effective limitation of the peak let-through current and the let-through energy, the arc has to move rapidly off the contacts and has to increase the arc voltage which mainly effect to interrupt. In this paper. we made high performance circuit breaker which including current limiting unit which is attached to the main which is simulated by CAE tool that are repulsion force and mechanical dynamics after that we tested and finally selected optimized for circuit breaker.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.317-317
• /
• 2000

The mathematical set-up model was developed to reduce the mechanical property deviation in annealed and slightly rolled steel strip. The mechanical peculiarities of temper rolling process, such as high friction value and non-circular contact arc, Low reduction and non-negligible entry and exit elastic zones as well as central restricted deformation zone are all taken into account. The deformation of work rolls is calculated with the influence function method and arbitrary contact arc shape is permitted. The strip deformation is modeled by slab method and the entry and exit elastic deformation zones are included. The restricted deformation Bone near the neutral point is also considered. It was revealed that the new model has better accuracy than present regression model by statistical analysis with actual mill rolling data.

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1452-1454
• /
• 1997

Properties of flashover in polymer insulators are very important under pollution environments. It is necessary to analyse flashover characteristics whether insulators are still safe or not. A lot of precious information can be got out of polluted polymer insulators through leakage current measurement. The behavior of partial arc discharge leads to flashover directly. It is possible to measure partial arc discharge as leakage current pulses analysis. The shape of histogram reflects degree of pollution, wetting and voltage stress level. It can be expressed by Weibull distribution function.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.69-70
• /
• 2014

In this paper, the 50kw submerged arc welding system has AC/DC durable output power and when AC output power is on, it shows control function on frequency, duty and offset. This system is constructed based on parrallel system, set on modular structure minimize the influence from high power into system. Also, it applied the sequence for optimized welding ability which lead it to increased weld quality.

• Journal of Welding and Joining
• /
• v.7 no.4
• /
• pp.22-29
• /
• 1989

In this paper weld distortion both in butt and fillet welds by flux cored arc welding has been investigated by changing welding parameters such as heat input and plate thickness, and the weld distortion was expressed as a function of welding parameters adopting the inherent strain theory as proposed by Watanabe and Satoh in 1961. As results of the research it is proposed that transverse shrinkage in root pass butt welds in proportional to ln[(Q/t_-tan.theta.] where Q is heat input(cal/mm), t is plate thickness(mm), and 2.theta. is groove angle(degree), and angular distortion .phi.(radian) in one pass of fillet welds has the following relationship: .phi..var.(Q/ $t^{1.5}$)$^{3}$exp[-(Q/ $t^{1.5}$ )$^{2}$3/] These equations provide us with basic tools to predict the amount of weld distortion in welded structures.

• Nuclear Engineering and Technology
• /
• v.51 no.1
• /
• pp.317-324
• /
• 2019

A high energy arcing fault event occurred in the medium-voltage (13.8 kV and 4.16 kV) metalclad switchgears in a nuclear power plant not only affecting switchgear but also connected equipment due to the arc energy. The high energy arcing fault also causes a fire that influences the safety function of the unit. Therefore, from the safety point of view, it is necessary to evaluate the influences of high energy arcing fault events on the safety functions of nuclear power plants. The purpose of this paper is to elaborate the characteristics of high energy arcing faults and propose a high energy arcing fault mitigation scheme for medium voltage networks in nuclear power plants.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10b
• /
• pp.191-196
• /
• 1993

Since the welding process is complex and highly nonlinear, it is very difficult to accurately model the process for real-time control. In this paper, a discrete-time transfer function matrix model for gas metal arc welding process is proposed. Although this linearized model is valid only around the operating point of interest, the adaptation mechanism employed in the control system render this model useful over a wide operating range. A multivariable one-step-ahead adaptive control strategy combined with a recursive least-squares method for on-line parameter estimation is implemented in order to achieve the desired weld bead geometries. Command following and disturbance rejection properties of the adaptive control system for both SISO and MIMO cases are investigated by simulation and experiment.

• Bulletin of the Korean Mathematical Society
• /
• v.24 no.1
• /
• pp.13-17
• /
• 1987

Let S denote the class of nivalent functions normalized so that f(0)=f'(0)-1=0 in vertical bar z vertical bar <1. Let $S_{\alpha}$$^{*}$, -.pi./2<.alpha.<.pi./2, denote the subclass of S that satisfies Re $e^{i{\alpha}}$zf'(z)/f(z).geq.0 in vertical bar z vertical bar <1; then f is called .alpha.-spiral-like and the case .alpha.=0 is the class of normalized starlike functions [6, pp.52]. Let T denote the class of functions f normalized as above and satisfying Im z[Im f(z)]..geq.0 in vertical bar z vertical bar <1; then f is called typically real and T contains those functions of S whose coefficients are real [6, pp.55]. Also, in view of [6, pp.231], let B(.lambda.) be the class of function normalized as above and map vertical bar z vertical bar <1 onto the complement of an arc with radial angle .lambda.(0<.lambda.<.pi./2). The radial angle is meant to be the angle between the tangent and radial vectors to the arc. This note includes a sharp version for Corollary 1 of [2] when f.mem. $S_{\alpha}$$^{*}$ as well as a logarithmic coefficient estimate.nt estimate.

• Spatial Information Research
• /
• v.11 no.3
• /
• pp.275-289
• /
• 2003

This study focused on offering a helpful information for the touring. To develop a tour route guidance tool, it is needed to use a GIS function, which can suggest a possible shortest path based on time and distance. A Traveling salesman problem algorithm, which was developed to solve multi destination problem in network analysis, was used to implement a tour guidance system. This system was developed using ArcObjects programming components within ArcGIS 8.3. Jeju city was selected for the case study to apply the tool and to test the effectiveness of it. This study demonstrated that this tool was considerably effective for finding a probable optimum tour path in the following aspects. First, it can help tourists to select several attractions from numerous tour sites in an area given limited time. Second, tourist can manage time efficiently by organizing their tour courses on the basis of the tool. Third, tourists can reduce the uncertainties that may happen under unexpected situations in unfamiliar places by obtaining specific spatial information using the tool. Fourth, the Graphic User Interface of the tool can be easily used to obtain visual information of spatial data.

• Journal of Welding and Joining
• /
• v.16 no.5
• /
• pp.119-133
• /
• 1998

To implement full automation in pipe welding, it si most important to develop special sensors and their related systems which act like human operator when detecting irregular groove conditions. In this study, an automatic pipe Gas Metal Arc Welding (GMAW) system was proposed to full control pipe welding procedure with intelligent sensor systems. A five-axes manipulator was proposed for welding torch to automatically access to exact welding position when pipe size and welding angle were given. Pool status and torch position were measured by using a weld-pool image monitoring and processing technique in root-pass welding for weld seam tracking and weld pool control. To overcome the intensive arc light, pool image was captured at the instance of short circuit of welding power loop. Captured image was processed to determine weld pool shape. For weld seam tracking, the relative distance of a torch position from the pool center was calculated in the extracted pool shape to move torch just onto the groove center. To control penetration of root pas, gap was calculated in the extracted pool image, and then weld conditions were controlled for obtaining appropriate penetration. welding speed was determined with a fuzzy logic, and welding current and voltage were determined from a data base to correspond to the gap. For automatic fill-pass welding, the function of human operator of real time weld seam control can be substituted by a sensor system. In this study, an arc sensor system was proposed based on a fuzzy control logic. Using the proposed automatic system, root-pass welding of pipe which had gap variation was assured to be appropriately controlled in welding conditions and in torch position by showing sound welding result and good seam tracking capability. Fill-pass welding by the proposed system also showed very successful result by tracking along the offset welding line without any control of human operator.