• Textile Coloration and Finishing
• /
• v.27 no.3
• /
• pp.194-201
• /
• 2015

Cotton and silk fabrics were dyed with Houttuynia cordata extract using aqueous ethanol solution and the dyeing and post-treatment conditions were optimized to impart antimicrobial activity to the fabrics. The dried Houttuynia cordata can be extracted at $80^{\circ}C$ for 3 hours using an aqueous ethanol solution containing 70%(w/w) ethanol. For the highest color yields. Both cotton and silk fabrics can be dyed at $100^{\circ}C$ for 60min with 10g/L of NaCl under pH 4. Silk fabrics can be dyed to higher K/S than cotton fabrics. The color fastness properties of the dyed fabrics were good when either citric acid crosslinking or aluminum alum mordanting was carried out as a post treatment. The dyed silk and cotton fabrics with the post treatments showed excellent antimicrobial activity against both Staphylococcus aureus and Klebsiella pneumoniae.

• Korean Chemical Engineering Research
• /
• v.49 no.3
• /
• pp.292-296
• /
• 2011

Liberation of fermentable sugars from lignocellulosic biomass is one of the key challenges in production of cellulosic ethanol. Aqueous ammonia cleaves ether and ester bonds in lignin carbohydrate complexes. It is an effective swelling reagent for lignocellulosic biomass. The aqueous ammonia pretreatment selectively reduces the lignin content of biomass. However, at high temperatures, this process solubilizes more than 50% of the hemicellulose in the biomass. Here we conducted a SAA(Soaking in Aqueous Ammonia) process by moderate reaction temperatures at atmospheric pressure using various lignocellulosicbiomass. The optimum condition of this process was 15 wt% of aqueous ammonia at 50 of reaction time during 72 hr. The delignification was up to 60% basis on initial biomass and the enzymatic digestibility was 60-90% for agricultural biomass, respectively.

• YAKHAK HOEJI
• /
• v.50 no.1
• /
• pp.1-7
• /
• 2006

The purpose of the present study was to formulate the aqueous solution of 1-cyclopent-3-enylmethyl-6(3,5-dimethyl-benzoyl)-5-ethyl-1H-pyrimidine-2,4-dione (CPD), a novel antivirus compound containing pirimidine structure. For this purpose, the effects of various solubilization agents such as cosolvents [ethanol, propylene glycol (PG), polyethylene glycol 300 (PEG 300), polyethylene glycol 400 (PEG 400), glycerin], surfactants (Tween 80, Cremophor$^{(R)}$ RH40, Cremophor$^{(R)}$ EL, Poloxamer 407, Poloxamer 188) and a complexation agent [hydroxypropyl-${\beta}$-cyclodextrin (HPBCD)] , on the solubility of CPD in aqueous solution were evaluated. The solubility of CPD in water was under $1\;{\mu}g/ml$ at $20^{\circ}C$. Cosolvents such as ethanol, PG, PEG 300, PEG 400 and glycerin did not enhance the solubility of CPD at the $0{\sim}40\%$ concentration range. The solubility of CPD was significantly elevated by the addition of cosolvents over the $80\%$ concentration range. On the other hand, tween 80, Cremophor$^{(R)}$ L, Cremophor$^{(R)}$ RH40, and HPBCD showed enhanced effects on the solubility of CPD. The enhanced effects of Poloxamer 407 or Poloxamer 188 on the CPD solubility were less pronounced compared with tween 80, Cremophor$^{(R)}$ L or Cremophor$^{(R)}$ RH40. As a results, tween 80 aqueous solution was selected as an optimum solvent system. The aqueous solutions containing $20\%$ tween 80 were formulated as a dosing solution containing CPD for its intraperitoneal and intrahypodermic administration, respectively, The formular showed physical stability after stored for 7 days at $4^{\circ}C$.

• Journal of Pharmaceutical Investigation
• /
• v.34 no.5
• /
• pp.385-391
• /
• 2004

The purpose of the present study was to formulate the aqueous solution of $20-O-{\beta}-D-glucopyranosyl-20(S)-protopanaxadiol\;(IH-901)$, an intestinal bacterial metabolic derivative from Ginseng protopanaxadiol saponin. For this purpose, the effects of various solubilization agents such as cosolvents [ethanol, propylene glycol (PG), polyethylene glycol 300 (PEG 300), polyethylene glycol 400 (PEG 400), glycerin], surfactants $(Tween\;80,\;Cremophor^{\circledR}\;RH40,\;Cremophor^{\circledR}\;EL,\;Poloxamer\;407,\;Poloxamer\;188)$ and a complexation agent $[hydroxypropyl-{\beta}-cyclodextrin\;(HPBCD)]$, on the solubility of IH-90l in aqueous solution were evaluated. The solubility of IH-901 in water was under $1\;{\mu}g/ml\;at\;20^{\circ}C$. Cosolvents such as ethanol, PG, PEG 300, PEG 400 and glycerin did not enhance the solubility of IH-901 at the 0 - 40% concentration range. The solubility of IH-901 was significantly elevated by the addition of cosolvents over the 80% concentration range. On the other hand, tween 80, $Cremophor^{\circledR}\;EL,\;Cremophor^{\circledR}\;RH40$ and HPBCD showed enhanced effects on the solubility of IH-901. The enhanced effects of Poloxamer 407 or Poloxamer 188 on the IH-901 solubility were less pronounced compared with $Cremophor^{\circledR}\;EL\;or\;Cremophor^{\circledR}\;RH40$. As a results, $Cremophor^{\circledR}$ aqueous solution was selected as an optimum solvent system. The aqueous solutions containing 10% $Cremophor^{\circledR}\;EL$ and 7% $Cremophor^{\circledR}\;RH40$ were formulated as dosing solutions containing 5.0 mg/ml of IH-901 for its intravenous and oral administration, respectively. The formular showed physical stability after stored for 7 days at $4^{\circ}C$.

• Polymer(Korea)
• /
• v.24 no.6
• /
• pp.802-809
• /
• 2000

Counterion-specific helix formation and ion-selective transport of alkali metal chlorides (LiCl, NaCl, KCl, CsCl) were investigated for a poly(L-glutamic acid)(PLGA)/poly (vinyl alcohol)(PVA) blend membrane immersed in aqueous ethanol. The counterion specificity for helix formation of PLG alkali metal salts in the membrane was Li>Na>K>Cs. This specificity is ascribed to a contact ion-pair formation between the PLG carboxyl anion and the bound counterion, which depends on the energy balance between the electrostatic interaction and the desolvation. In aqueous ethanol, an appreciable ion-selectivity was observed for the permeability coefficient, i.e. Li$^{+}{\cdot}$Cl$^{-}$) formation between counterion and coion, and the latter to a specific interaction of diffusing counterions with polymer charges.

• Journal of Food Hygiene and Safety
• /
• v.15 no.1
• /
• pp.36-40
• /
• 2000

This study was carried out to know the active faction of Dryopteris rhizoma on antimicrobial activity against some food spoilage microorganisms. Also, antimicrobial activities were investigated for the aqueous and ethanolic extracts of four herbs such as Teminaliae fructus, Eugeniae flos, Salviae miltior-rhizae radix and Dryopteris rhizoma. Antimicrobial activities of three herbs except for Terminaliae fructus showed higher activities in 75% ethanolic extracts than in aqueous extract. Ethanolic extract of Dryopteris rhizoma showed the highest antimicrobial activity among extracts of four herbs. Antimicrobial activity intensities of solvent fractions of Dryopteris rhizoma extracted by 75% ethanol were order to CHC1$_3$fraction>EtOAc fraction >BuOH fraction>$H_2O$ fraction. The CHC1$_3$, EtOAc and BuOH fractions also inhibited growth of food spoilage microorganisms as the concentration increased, respectively. In case of EtOAc fraction, 1000 ppm of fraction almost inhibited completely the growth of microorganisms tested.

• Journal of Ginseng Research
• /
• v.44 no.1
• /
• pp.44-49
• /
• 2020

Background: Salting-out extraction (SOE) had been developed as a special branch of aqueous two-phase system recently. So far as we know, few reports involved in extracting ginsenosides with SOE because of the lower recovery caused by the unique solubility and surface activity of ginsenosides. A new SOE method for rapid pretreatment of ginsenosides from the enzymatic hydrolysates of Panax quinquefolium was established in this article. Methods: The SOE system comprising ethanol and sodium carbonate was selected to extract ginsenosides from the enzymatic hydrolysates of Panax quinquefolium, and HPLC was applied to analyze the ginsenosides. Results: The optimized extraction conditions were as follows: the aqueous two-phase extraction system comprising ethanol, sodium carbonate, ethanol concentration of 41.51%, and the mass percent of sodium carbonate of 7.9% in the extraction system under the experimental condition. Extraction time had minor influence on extraction efficiency of ginsenosides. The results also showed that the extraction efficiencies of three ginsenosides were all more than 90.0% only in a single step. Conclusion: The proposed method had been successfully applied to determine ginsenosides in enzymatic hydrolysate and demonstrated as a powerful technique for separating and purifying ginsenosides in complex samples.

• Journal of Pharmaceutical Investigation
• /
• v.38 no.6
• /
• pp.373-380
• /
• 2008

In order to develop optimal formulation and iontophoresis condition for the transdermal delivery of levodopa, we have evaluated the effect of two permeation enhancers, ethanol and oleic acid in microemulsion, on transdermal delivery of levodopa. In vitro flux studies were performed at $33^{\circ}C$, using side-by-side diffusion cell and full thickness hairless mouse skin. Current density applied was $0.4\;mA/cm^2$ and current was off after 6 hours application. Levodopa was analysed by HPLC at 280 nm. The o/w microemulsions of oleic acid in buffer solution (pH 2.5 & 4.5) were prepared using oleic acid, Tween 80 and ethanol. The existence of microemulsion regions were investigated in pseudo-ternary phase diagrams. Contrary to our expectation, cumulative amount of levodopa transported from microemulsion (pH 2.5) for 10 hours was similar to that from aqueous solution in all delivery methods (passive, anodal and cathodal). When pH of the micro-emulsion was pH 4.5, cumulative amount of levodopa transported for 10 hours increased about 40% (anodal) to 50% (cathodal), when compared to that from aqueous solution. Flux from pH 4.5 microemulsion showed higher value than that from pH 2.5 in all delivery methods. These results seem to indicate that electroosmosis plays more dominant role than electrorepulsion in the flux of levodopa at pH 2.5. The effect of ethanol on iontophoretic flux was studied using pH 2.5 phosphate buffer solution containing 3% or 5% (v/v) ethanol. Flux enhancement was observed in passive and anodal delivery as the concentration of the ethanol increased. Without ethanol, cathodal delivery showed higher flux than anodal delivery. Anodal delivery increased the cumulative amount of levodopa transported 1.6 fold by 5% ethanol after 10 hours. However, in cathodal delivery, no flux enhancement of levodopa was observed during current application and only marginal increase in cumulative amount transported after 10 hours was observed by 5% ethanol. These results seem to be related to the decrease in dielectric constant of the medium and the lipid extraction of the ethanol, which decrease the electroosmotic flow, and thus decrease the flux. Overall, the results provide important insights into the role of electroosmosis and electrorepulsion in the transport of levodopa through skin, and provide some useful informations for optimal formulation for levodopa.

• Membrane Journal
• /
• v.12 no.4
• /
• pp.255-261
• /
• 2002

Poly(vinyl alcohol) (PVA) membranes crosslinked with poly(acrylic acid-co-maleic anhydride) (PAM) as a polymeric crosslinking agent were prepared to investigate the pervaporation performance for the dehydration separation of aqueous ethanol solution. The characteristics of the resulting membranes crosslinked(x) were analysed by FT-IR and water swelling test. The water swelling decreased with increasing crosslinking agent content. The crosslinked PVA membranes with PAM showed lower water swelling than those of PVA membrane crosslinked with glutaraldehyde and modified PVA membrane. The swelling of water molecules in the crosslinked PVA membranes is more restricted by both chemical crosslinking between PVA and polymeric crosslinking agent chains and physical crosslinking by the entanglement between the PVA and polymeric crosslinking agent chains. For the pervaporation of aqueous ethanol solution through the crosslinked membrane, as the contents of crosslinking agent increased, the separation factor increased while the permeation flux decreased. The separation factor slightly decreased and permeation flux increased with increasing feed water content. As a result it could be considered that PVA-PAM membranes suppressed the plasticization effect even in the range of high water concentration in fled.

• Korean Journal of Food Science and Technology
• /
• v.32 no.3
• /
• pp.570-577
• /
• 2000

A method was presented for determination of bisphenol F(BPF), bisphenol A(BPA), bisphenol F diglycidyl ether(BFDGE) and bisphenol A diglycidyl ether(BADGE) in 3 aqueous-based food simulants (water, 4% acetic acid, 20% ethanol) by reverse-phase high performance liquid chromatography(RP-HPLC)with fluorescence detection and gas chromatography with mass selective detection(GC/MSD). All the calibration lines in the range of $5{\sim}800\;{\mu}g/L$ had correlation coefficients greater than 0.9998 and detection limits of less than $1.2\;{\mu}g$ bisphenols/L. Precision at $200\;{\mu}g/L$ was under 3.1%. Recoveries of bisphenols simultaneously spiked to aqueous food simulants exceeded 95% for BPF and BPA but about 80% for BFDGE and BADGE. However, recoveris of BFDGE and BPADGE respectively spiked increased upto 95%. Detection limits in recovery test were less than $0.40\;{\mu}g$ bisphenols/L. In migration test bisphenols were determined by RP-HPLC coupled with confirmation by GC/MSD. Can coatings of epoxy phenol, modified epoxy, epoxy ester phenol and thermoset vinyl were exposed to the 3 aqueous food simulants. BPF, BFDGE and BADGE were not detected in all the can coatings but BPA was detected in 4% acetic acid and 20% ethanol in all the can coatings except modified epoxy.