• Asian-Australasian Journal of Animal Sciences
• /
• v.2 no.1
• /
• pp.1-6
• /
• 1989

Nutritive values and fermentation rates of rice straw treated with 3% anhydrous and 3% aqueous ammonia were evaluated both in vitro and sheep metabolism trials. Daily gain, feed efficiency and feed cost per gain were also determined with growing Holstein bulls fed anhydrous and aqueous ammonia treated rice straw. Crude protein was increased 2.4 fold and NDF was decreased 6.5%, but ADF and cellulose were not different between untreated and ammonia treated rice straw. An average of 35.5% of total added ammonia-N retained in the rice straw and other 64.5% was not retained in the rice straw. Ammonia treatment increased in vitro DM, NDF, ADF and cellulose digestibilities by 44.8%, 43.3%, 49.4% and 42.4%, respectively, and fermentation rates by 63.3%, 132.4%, 49.4% and 42.4%, respectively. In sheep metabolism trials, DM digestibilities of rice straw treated with anhydrous and aqueous ammonia were increased 22% and 36%, respectively, and digestible DM intakes by 48% and 70%, respectively in sheep fed anhydrous and aqueous ammonia treated rice straw over untreated rice straw. Rumen ammonia and blood urea were considerably higher in sheep fed ammonia treated rice straw than sheep fed untreated rice straw. Daily gain of Holstein bulls was increased 20.8% and 29.9% and rice straw intakes were increased 28.4% and 44.3% in anhydrous and aqueous ammonia treated rice straw over untreated rice straw. Feed conversion was improved 9.5% and 10.3% and feed cost/gain was reduced 7.1% and 9.2% respectively in anhydrous and aqueous ammonia treated rice straw group as compared with untreated rice straw group.

• New & Renewable Energy
• /
• v.6 no.4
• /
• pp.6-14
• /
• 2010

Pretreatment of cellulosic biomass is necessary before enzymatic saccharification and fermentation. Extrusion is a well established process in food industries and it can be used as a physicochemical treatment method for cellulosic biomass. Aqueous ammonia soaking treatment at mild temperatures ranging from 60 to $80^{\circ}C$ for longer reaction times has been used to preserve most of the cellulose and hemicellulose in the biomass. The objective of this study was to evaluate the effect of extrusion treatment on aqueous ammonia soaking method. Extrusion was performed with miscanthus sample conditioned to 2mm of particle size and 20% of moisture content at $200^{\circ}C$ of barrel temperature and 175rpm of screw speed. And then aqueous ammonia soaking was performed with 15%(w/w) ammonia solution at $60^{\circ}C$ for 1, 2, 4, 8, 12 hours on the extruded and raw miscanthus samples respectively. In the combined extrusion-soaking treatment, most compositions removal occurred within 1~2 hours and on a basis of 1 hour soaking treatment values, cellulose was recovered about 85% and other compositions, including hemicellulose, are removed about 50% from extruded miscanthus sample. The combined extrusion-soaking treated and soaking only treated samples were subjected to enzymatic hydrolysis using cellulase and ${\beta}$-glucosidase. The enzymatic digestibility value of combined extrusion-2 hours soaking treated sample was comparable to 12 hours soaking only treated sample. It means that extrusion treatment can shorten the conventional long reaction time of aqueous ammonia soaking. The findings suggest that the combination of extrusion and soaking is a promising pretreatment method to solve both problems for no lignin removal of extrusion and long reaction time of aqueous ammonia soaking.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.179.1-179.1
• /
• 2011

Pretreatment of cellulosic biomass is necessary before enzymatic saccharification and fermentation. The objective of this study was to evaluate the effect of combined aqueous ammonia-dilute sulfuric acid treatment on cellulosic biomass. Miscanthus was pretreated using aqueous ammonia and dilute sulfuric acid solution under high temperature and pressure conditions to be converted into bioethanol. Aqueous ammonia treatment was performed with 15 %(w/w) ammonia solution at $150^{\circ}C$ of reaction temperature and 20 minutes of reaction time. And then, dilute sulfuric acid treatment was performed with 1.0 %(w/w) sulfuric acid solution at $150^{\circ}C$ of reaction temperature and 10 minutes of reaction time. The compositional variations of this combined aqueous ammonia-dilute sulfuric acid treatment resulted in 68.0 % of cellulose recovery and 95.7 % of hemicellulose, 81.3 % of lignin, 89.1 % of ash removal respectively. The enzymatic digestibility of 90.5 % was recorded in the combined pretreated Miscanthus sample and it was 14.7 times higher than the untreated sample. The ethanol yield in the Simultaneous Saccharification and Fermentation was 90.4 % of maximum theoretical yield based on cellulose content of the combined pretreated sample and it was about 98 % compared to the ${\alpha}$-cellulose ethanol yield.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.9
• /
• pp.798-802
• /
• 1996

The photochemical decomposition of aqueous ammonia in the absence (saturated with argon) and the presence of O2 (saturated with air or oxygen) has been investigated using 184.9 nm UV light. The decomposition of ammonia depended on the concentration of oxygen in the solution. With increasing the concentration of oxygen, the decomposition of ammonia diminishes. Hydrazine is found the major product from the irradiation. In the presence of oxygen, hydrogenperoxide was also produced. The product yields depended also on the concentration of oxygen in the solution. The initial quantum yield of the products and of the ammonia decomposed were determined. Probable reaction mechanisms for the reaction were presented from the products analysis.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.3
• /
• pp.555-561
• /
• 2008

In air stripping of ammonia from the aqueous solution, a new removal model was presented considering the equilibrium principles for the ammonia in aqueous solution and between the aqueous and air phase. The effects of pH, temperature and airflow rate on the ammonia removal were evaluated with the model. In addition, the saturation degree of ammonia in air was defined and used to evaluate the effect of each experimental factor on the removal rate. As pH (8.9 to 11.9) or temperature (20 to 50 oC) was increased, the overall removal rate constants in all cases were appeared to be increased. Our presented model shows that the degrees of saturation were about the same (0.45) in all cases when the airflow condition remains the same. This result indicates that the effect of pH and temperature were directly taken into consideration in the model equation. As the airflow increases, the overall removal rate constants were increased in all cases as expected. However, the saturation degree was exponentially decreased with increasing the airflow rate in the air phase (or above-surface) aeration. In the subsurface aeration the saturation degree remains a constant value of 0.65 even though the airflow rate was increased. These results indicate that the degree of saturation is affected mainly by the turbulence of the aqueous solution and remains the same above a certain airflow rate.

• Journal of Photoscience
• /
• v.6 no.4
• /
• pp.177-181
• /
• 1999

The photochemical transformation of carbon monoxide in aqueous ammonia solution has been investigated at 25${\pm}$0.1$^{\circ}C$ using 184.9 nm UV light. Amination and carbonylation processes were carried out by irradiating the aqueous ammonia solution saturated with carbon monoxide, and the formation of formamide, urea, hexamethylenetetramine, formaldehyde, glyoxal and hydrazine was observed. The formation of hydrazine was affected by the presence of ammonia, and the formation of carbonyl compounds such as formaldehyde and glyoxal was influenced by the presence of carbon monoxide. The formation of formamide, urea and hexamethylenetetramine was affected by both ammonia and carbon monoxide. The initial quantum yields of the products were determined and probable mechanisms for the photochemical reaction were presented on the basis of product analysis.

• Korean Chemical Engineering Research
• /
• v.49 no.3
• /
• pp.292-296
• /
• 2011

Liberation of fermentable sugars from lignocellulosic biomass is one of the key challenges in production of cellulosic ethanol. Aqueous ammonia cleaves ether and ester bonds in lignin carbohydrate complexes. It is an effective swelling reagent for lignocellulosic biomass. The aqueous ammonia pretreatment selectively reduces the lignin content of biomass. However, at high temperatures, this process solubilizes more than 50% of the hemicellulose in the biomass. Here we conducted a SAA(Soaking in Aqueous Ammonia) process by moderate reaction temperatures at atmospheric pressure using various lignocellulosicbiomass. The optimum condition of this process was 15 wt% of aqueous ammonia at 50 of reaction time during 72 hr. The delignification was up to 60% basis on initial biomass and the enzymatic digestibility was 60-90% for agricultural biomass, respectively.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.114.1-114.1
• /
• 2011

Bioenergy production from lignocellulosic biomass and agriculture wastes have been attracted because of its sustainable and non-edible source. Especially, canola is considered as one of the best feedstock for renewable fuel production. Oil extracted canola and its agriculture residues are reuseable for bioethanol production. However, a pretreatment step is required before enzymatic hydrolysis to disrupt recalcitrant lignocellulosic matrix. To increase the sugar conversion, more efficient pretreatment process was necessary for removal of saccharification barriers such as lignin. Alkaline pretreatment makes the lignocellulose swollen through solvation and induces more porous structure for enzyme access. In our previous work, aqueous ammonia (1~20%) was utilized for alkaline reagent to increase the crystallinity of canola residues pretreatment. In this study, significant factors for efficient soaking in aqueous ammonia pretreatment on canola residues was optimized by using the response surface method (RSM). Based on the fundamental experiments, the real values of factors at the center (0) were determined as follows; $70^{\circ}C$ of temperature, 17.5% of ammonia concentration and 18 h of reaction time in the experiment design using central composition design (CCD). A statistical model predicted that the highest removal yield of lignin was 54% at the following optimized reaction conditions: $72.68^{\circ}C$ of temperature, 18.30% of ammonia concentration and 18.30 h of reaction time. Finally, maximum theoretical yields of soaking in aqueous ammonia pretreatment were 42.23% of glucose and 22.68% of xylose.

• Journal of the Korean Institute of Gas
• /
• v.20 no.2
• /
• pp.49-57
• /
• 2016

Aqueous ammonia is widely used in household cleaners, fertilizers and denitrification process. It is usually treated in concentrations from 10 % to 30 %, and release accidents have occurred frequently. In this study, we developed a simplified estimating method and equation to calculate threat zone easily in case of emergency due to release accident of aqueous ammonia. We calculated the consequence distance for toxic endpoints of aqueous ammonia(concentration 10 % ~ 30 %) at different puddle areas($1m^2{\sim}500m^2$) using the ALOHA program. Based on the result, we analyzed the relationship between concentration and puddle area with the threat zone and created the equation.

• Korean Chemical Engineering Research
• /
• v.53 no.4
• /
• pp.417-424
• /
• 2015

In this study, the pretreatment of Helianthus tuberosus residue had been performed. The two-stage pretreatment on flow-through process were applied in the interests of increase of sugar production yield on enzymatic saccharification. The delignification by aqueous ammonia and the fractionation of hemicellulose by sulfuric acid solution as pretreatment solution were confirmed for effects of enzymatic saccharification. Two-stage pretreatment process was performed using aqueous ammonia and sulfuric acid. The first step was performed with aqueous ammonia for 40 min at $163.2^{\circ}C$ and the second step was performed with sulfuric acid solution for 20 min at $169.7^{\circ}C$. And then, the first step was performed with sulfuric acid solution and the second step was pretreated with aqueous ammonia. At this time, the glucose production was 30.7 g and the glucose yield was 72.4% in the first step process with aqueous ammonia. And, the glucose production was 20.9 g and the glucose yield was 49.3% in the first step process with sulfuric acid solution.