• 한국지진공학회논문집
• /
• 제12권1호
• /
• pp.79-87
• /
• 2008

구조물의 내진 성능 평가는 구조물에 가해진 지진력에 대한 변위요구와 같은 구조물의 성능 평가를 필요로 한다. 증분동적해석(IDA)은 지진하중에 대한구조물의 성능 평가를 위해 최근에 알려진 해석 방법이다. 이 방법은 구조물의 탄성 단계에서부터 항복, 파단에 이르기까지 지반가속도의 증가 수준에 따른 구조물의 전체 거동을 파악할 수 있는 방법이다. 대부분의 구조물들은 강한 지진을 받을 경우, 비선형 거동의 변형이 예상된다. 여러 가지 비선형해석법 가운데 구조물의 내진역량을 계산하기 위한 가장 정확한 방법은 비선형 시간이력해석(NRHA)이긴 하나 많은 시간과 노력이 요구되고 있다. 따라서 구조물의 비선형 거동을 보다 간편하게 예측하기 위한 정확하고 실용적인 비선형 약산해석법에 관한 연구들이 활발히 진행되고 있다. 비선형 모드중첩법(UMRHA)은 pushover곡선으로부터 구한 등가단자유도계를 비선형 시간이력해석 또는 응답스펙트럼을 이용하여 구조물의 비선형 응답을 구할 수 있는 방법이다. 직접스펙트럼해석법(DSA)은 pushover 해석으로부터 구조물의 선형 진동주기와 항복강도를 구한 다음, 반복계산 없이 비선형 응답을 직접 산정하는 약산법이다. 본 연구에서는 내진성능의 증분동적해석을 위한 비선형 약산법의 정확성과 신뢰성을 비교 검토한다.

• 한국유체기계학회 논문집
• /
• 제15권1호
• /
• pp.21-26
• /
• 2012

In this investigation, the aerodynamic performance evaluation of a 1MW class blade has been performed with the purpose of the verification of target output and its clear understanding of flow field using CFD commercial code, ANSYS FLUENT. Before making progress of CFD analysis the HERACLES V2.0 software based on blade element momentum theory was applied for confirmation of quick and approximate performance in the preliminary stage. The blade was designed to produce the target output of a 1MW class at a rated wind speed of 12m/s, which consists of five different airfoils such as FFA W-301, DU91-W250, DU93-W-210, NACA 63418 and NACA 63415 from hub to tip. The mechanical power by CFD is approximately 1.195MW, which is converted into the electrical power of 1.075MW if the system loss is considered to be 0.877.

• Journal of Communications and Networks
• /
• 제11권3호
• /
• pp.240-247
• /
• 2009

The results of performance analysis by adopting the channel scenarios characterized as Weibull fading for an multicarrierdirect sequence-coded division multiple access (MC-DS-CDMA) system are proposed in this investigation. On the other hand, an approximate simple expression with the criterion of bit error rate (BER) versus signal-to-noise ratio (SNR) method is derived for an MC-DS-CDMA system combining with maximal ratio combining (MRC) diversity based on the moment generating function (MGF) formula of Weibull statistics, and it associates with an alternative expression of Gaussian Q-function. Besides, the other point of view on the BER performance evaluation of an MC-DS-CDMA system is not only the assumption of both single-user and multi-user cases applied, but the phenomena of partial band interference (PBI) is also included. Moreover, in order to validate the accuracy in the derived formulas, some of the system parameters, such as Weibull fading parameter (${\beta}$), user number (K), spreading chip number (N), branch number (L), and the PBI (JSR) values, etc., are compared with each other in the numerical results. To the best of author's knowledge, it is a brand new idea which proposes the evaluation of the system performance for an MC-DS-CDMA system over the point of view with Weibull fading channel.

• 한국정보처리학회논문지
• /
• 제5권4호
• /
• pp.951-958
• /
• 1998

본 논문에서는 퍼지생성규칙을 표현한 퍼지페트리네트에서 사용할 수 있는 후진추론 알고리즘을 제안한다. 퍼지페트리 네트워크표현은 근사추론 시스템을 모형화하거나 퍼지추론엔진을 구현하는데 사용할 수 있다. 본 논문이 제안한 알고리즘은 단순히 min과 max 게산만을 하는 기존의 알고리즘과는 달리 퍼지생성규칙의 전제부와 결론부에 퍼지개념의 유무에 따라 적절한 믿음값평가함수을 사용하여 보다 더 인간적인 추론을 한다. 후진추론 알고리즘은 목표노드에서 시작노드까지의 후진추론 통로를 구한 후에 믿음값평가함수를 이용하여 목표노드의 믿음값을 구한다.

• 한국지진공학회논문집
• /
• 제5권4호
• /
• pp.9-16
• /
• 2001

본 연구의 목적은 지진에 의한 비보강 조적조의 거동을 평가하는 것이다. 효율적인 평가를 위하여 유사동적해석법을 사용하였다. 저층의 비보강 조적조에 대하여 지진하중에 의한 지반-구조물의 상호작용에 따른 영향을 평가하기 위하여 단단한 지반에 놓여진 구조물과 연약한 지반에 좋여진 구조물을 비교하였다. 그 결과 연약한 지반위에 놓인 구조물의 층 전단력과 밑면 전단력이 상대적으로 증가하는 것으로 나타났다. 또한 현재 사용되고 있는 내진기준에 주어진 약산식에 따라 해석을 수행할 경우 연약한 지반에 놓인 건물이 경우 전단력을 과소평가 할 수 있는 것으로 나타났다.

• 한국경영과학회지
• /
• 제31권3호
• /
• pp.63-79
• /
• 2006

In this study we consider a CONWIP system in which the processing times at each station follow a Coxian distribution and the demands for the finished products arrive according to a compound Poisson process. The demands that are not satisfied immediately are either backordered or lost according to the number of demands that exist at their arrival Instants. For this system we develop an approximation method to calculate performance measures such as steady state probabilities of the number of parts at each station, proportion of lost demands and the mean number of backordered demands. For the analysis of the proposed CONWIP system, we model the CONWIP system as a closed queueing network with a synchronization station and analyze the closed queueing network using a product-form approximation method. A recursive technique is used to solve the subnetwork in the application of the product-form approximation method. To test the accuracy of the approximation method, the results obtained from the approximation method are compared with those obtained by simulation. Comparisons with simulation show that the approximation method provides fairly good results.

• 한국식품영양학회지
• /
• 제14권6호
• /
• pp.596-604
• /
• 2001

Twelve varieties of Korean rice and ten varieties of Japanese rice were selected. After being milled. they were analyzed about various physicochemical properties such as moisture, protein and amylose, a -amylase activity, gelatinization properties. And after being cooked with proper amount of water texture and other physical properties were measured by Texturometer, Tensipresser and Rheolograph-micro. Finally the sensory evaluation test was carried out. The results were as follows. 1. In case of protein contents, amylose contents and $\alpha$-amylase activity, Korean rice had a slightly higher value than Japanese As a consequence. Korean rice showed a little stronger hardness and a little weaker stickiness compared with Japanese rice. 2. Amylose contents showed very high correlation with other physicochemical properties and peak viscosity and gelatinization temperature of RVA, the ratio of stickiness to hardness( -Hl/Hl ) of Texturometer and the tan $\delta$(the ratio of dynamic loss to dynamic viscoelasticity) of Rheolograph-micro showed high correlation with other analyzed properties. 3. The ( -/+)work balance of low compression test(25% ) of Tensipresser analysis(texture analysis on the surface of cooked rice) and tan f of Rheolograph-micro showed very high correlation with sensory evaluation results. By using this parameters as major independent variables, some trials to derive high confidence multiple regression equations were accomplished. By the equations it would be possible to make an approximate pre-estimate of eating quality for unknown japonica rice.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.5-8
• /
• 2003

This paper presents a methodology to be able to select an appropriate RP system that suits the end use of a part. Evaluation factors used in process selection include major attributes such as accuracy, roughness, strength, elongation, part cost and build time that greatly affect the performance of RP systems. Crisp values such as accuracy and surface roughness are obtained with a new test part developed. The test part is designed with conjoint analysis to reflect users' preference. The part cost and build time that have approximate ranges due to cost and many variable parameters are presented by linguistic values that can be described with triangular fuzzy numbers. Based on the evaluation values obtained, an appropriate RP process for a specific part application is selected by using the modified TOPSIS(Technique of Order Preference by Similarity to Ideal Solution) method. It uses crisp data as well as linguistic variables, and each weight on the alternatives is assigned by using pair-wise comparison matrix. The ranking order helps the decision making of the selection of RP systems.

• 대한토목학회논문집
• /
• 제13권3호
• /
• pp.163-172
• /
• 1993

본 문은 Lade의 Single surface 구성모델의 변형율 예측 능력을 평가하기 위해 백마강모래를 사용, 등방압축시험과 배수삼축시험을 반복 시행하여 모델에 필요한 각 토질매개변수값을 다수 구하여 통계처리 하였다. 그리고 1계근사법을 이용하여 이 구성모델의 변형율 예측능력을 확률론적으로 평가하였다. 그 결과 변동계수와 상관계수를 효과적으로 이용하여 토질매개변수의 수를 줄일 수 있을 것으로 기대되며 변동계수가 0.51 이하로서 이 구성모델의 변형율 예측 능력은 확률론적으로 매우 안정된 구성모델임을 알았다.

• 대한화장품학회:학술대회논문집
• /
• 대한화장품학회 1992년도 자외선 차단 화장품의 SPF에 관한 심포지움(대한화장품학회)
• /
• pp.5-26
• /
• 1992

Many methods of in vitro SPF evaluation have been developed in order to measure SPF of sunscreen products. In this study, we compared two spectrophotometric in vitro measurements using the skin cast made of Luviset CAP- $X^{R}$ resin and Transpor $e^{R}$ tape as substrate with two in vivo measurements using guinea pig and human. And we also observed the radiation reaching on the earth's surface in Seoul for one year and the change of the primary skin irritancy along the change of SPF value. According to the our research, the first, in vivo measurement using guinea pig had the close agreement with SPF measurement using human and showed the tendancy that guinea pig SPF was lower than human SPF. The second, there was the good relationship between in vitro SPF by using Transpor $e^{R}$ tape and in vivo SPF, and it is possible to predict human SPF from Protection Index(PI) by using tape. The third, it is thought that SPE 20 is reasonable value because of UV intensity in Seoul and the primary skin irritancy of higher SPF than 25. So we propose that it is important to distinguish the sunscreen product having higher than approximate 25 from the category of general cosmetics including lower SPF sunscreen product.oduct.