A field soil highly contaminated with petroleum hydrocarbons (JP-8 and diesel fuels) was employed for its remediation by a lab-scale thermal desorption process. The soil was collected in the vicinity of an underground storage tank in a closed military base and its contamination level was as high as 4,476 ppm as total petroleum hydrocarbon (TPH). A lab scale directly-heated low temperature thermal desorption (LTTD) system of 10-L capacity was developed and operated for the thermal treatment of TPH contaminated soils in this study. The desired operation temperature was found to be approximately $200-300^{\circ}C$ from the thermal gravimetric analysis of the contaminated field soils. The removal efficiencies higher than 90% were achieved by the LTTD treatment at $200^{\circ}C$ for 10 min as well as at $300^{\circ}C$ for 5 min. As the water content in the soils increased and therefore they were likely to be present as lumps, the removal efficiency noticeably decreased, indicating that a pre-treatment such as field drying should be required. The analysis of physical and chemical properties of soils before and after the LTTD treatment demonstrated that no significant changes occurred during the thermal treatment, supporting no needs for additional post-treatments for the soils treated by LTTD. The results presented in this study are expected to provide useful information for the field application and verification of LTTD for the highly contaminated geo-environment.
The frequency and size of typhoon and local severe rainfall are increasing due to the climate change and the damage also increasing from typhoon and severe rainfall. The flood forecasting and warning system to reduce the damage from typhoon and severe rainfall needs forecasted rainfall using radar data and short-term rainfall forecasting model. For this reason, this study examined the applicability of short-term rainfall forecast using translation model with weather radar data to point out that the utilization of flood forecasting in Korea. This study estimated the radar rainfall using Least-square fitting method and estimated rainfall was used as initial field of translation model. The translation model have verified accuracy of forecasted radar rainfall through the comparison of forecasted radar rainfall and observed rainfall quantitatively and qualitatively. Almost case studies showed that accuracy is over 0.6 within 4 hours leading time and mean of correlation coefficient is over 0.5 within 1 hours leading time in Kwanak and Jindo radar site. And, as the increasing the leading time, the forecast accuracy of precipitation decreased. The results of the calculated Mean Area Precipitation (MAP) showed forecast rainfall tend to be underestimated than observed rainfall but the correlation coefficient more than 0.5. Therefore it showed that translation model could be accurately predicted the rainfall relatively. The present results indicate that possibility of translation model application of Korea just within 2 hours leading forecasted rainfall.
Kim, Myung-Seob;Oh, Ju-Taek;Kim, Eung-Cheol;Jung, Dong-Woo
Journal of Korean Society of Transportation
/
v.26
no.4
/
pp.173-184
/
2008
Development of an accident estimation model based on accident data can be made after accident occurrences. However, the taking of historical accident data is not easy, and there have been differences between real accident data and police-reported accident data. Also, another difficult shortcoming is that historical traffic accident data better consider driver behavior or intersection characteristics. A new method needs to be developed that can predict accident occurrences for traffic safety improvement in black spots. Traffic conflict decision techniques can acquire and analyze data in time and space, requiring less data collection through investigation. However, there are shortcomings: as existing traffic conflict techniques do not operate automatically, the analyst's opinion could easily affect the study results. Also, existing methods do not consider the severity of traffic conflicts. In this study, the authors presented traffic conflict decision criteria which consider conflict severity, including opposing left turn traffic conflict and cross traffic conflict decision criteria. In order to test these criteria, the authors acquired three signalized intersection images (two intersections in Sungnam city and one intersection in Paju) and analyzed the acquired images using image processing techniques based on individual vehicle tracking technology. Within the analyzed images, level 1 conflicts occurred 343 times over three intersections. Some of these traffic conflicts resulted in level 3 conflict situations. Level 3 traffic conflicts occurred 25 times. From the study results, the authors found that traffic conflict decision techniques can be an alternative to evaluate traffic safety in black spots.
Research trend about nonpoint pollution source(NPS) that have studied since 1980 was divided into 4 categories: 1) runoff characteristics of NPS, 2) treatment technique, 3) LID and green infrastructure(GI), 4) management practices and policy. This study reviews them and recommends the future research direction. The research on runoff characteristics of NPS until 2010 was mainly carried out. But recently, many researchers has been conducting studies on technology development, effect evaluation and field application. Providing best measures on NPS should be tried to conduct studies that many fields such as society, geography, meteorology and environment are fused. But it has not been enough yet. Because the cause material and optimum measures of NPS are different from each other regionally, it is considered that it needs studies to prepare measures and guidelines with regional characteristics rather than a uniform measures and guidelines by the central government. In addition, more comprehensive studies must be carried out to establish rules and regulations to manage NPS not only by government sector but also the private sector.
Transactions of the Korean Society of Mechanical Engineers A
/
v.37
no.12
/
pp.1573-1579
/
2013
To test the performance of nuclear fuels, coolant needs to be circulated through the test rig installed in the test loop. Because the pressure and temperature of the coolant is 15.5 MPa and $300^{\circ}C$ respectively, coolant sealing is one of the most important processes in fabricating a nuclear fuel test rig. In particular, 15 instrumentation cables installed in a test rig pass through the pressure boundary, and brazing is generally applied as a sealing method. In this study, an induction brazing system has been developed using a high frequency induction heater including a vacuum chamber. For application in the nuclear field, BNi2 should be used as a paste, and optimal process variables for Ni brazing have been found by several case studies. The performance and soundness of the brazed components has been verified by a tensile test, cross section test, and sealing performance test.
Journal of the Korean Association of Geographic Information Studies
/
v.18
no.1
/
pp.105-119
/
2015
A case study to test the open API service functions of Geographic Information Open Platform(Vworld) for Environmental Impact Assessment was carried out for improving the function of Environmental Impact Assessment Geographic Information System(EIAGIS) which is one of Environmental Impact Assessment Supporting System(EIASS) used for current Environmental Impact Assessment. Followings are the summary of the study. First, utilization of EIAGIS was low since DB renewal was limited and the quality of 2D based topographic information was low. A new service which could respond to practitioners' needs could be developed to use a open API service of Vworld provided by the Ministry of Land, Infrastructure and Transport to make up those disadvantages. EIASS with Vworld could provide a consulting service from the beginning stage of business plan and make improvements of confidence as well as fast agreements since both consultation agencies and assessment agencies are using a same program during Environmental Impact Assessment process with customized information.
Journal of Korea Technical Association of The Pulp and Paper Industry
/
v.30
no.3
/
pp.38-45
/
1998
Soil and water contamination caused by the abundant use of agricultural chemicals including herbicides and fertilizers draws public concerns since these chemicals may pollute the agricultural lands as well as the food products grown on these lands. As a method to reduce the use of agricultural chemicals mulching with thin plastic film has been commonly practised for many years. Although use of the plastic film for mulching is very effective in preventing the growth of weed, it is almost impossible to remove all of the plastic film from the agricultural land and the remaining film eventually contaminates the soils. Therefore, it is very imperative to develop a mulching material that decomposes completely to prevent soil pollution problems and to enhance the competitive edge of domestic agriculture. Mulch papers are believed to have many positive characteristics in preventing problems caused by the plastic mulch film since it decomposes completely after use. However, the basis weight of mulch papers needs to be reduced to improve its handling properties and to reduce the raw material costs of pulps. In this paper the possibilities of using domestic old corrugated containers in producing mulch papers were examined. Also use of unbleached softwood kraft pulps and dry strength additives were exploited along with two-layered sheet forming technology in decreasing the basis weight of the mulch paper. Results showed that reduction of 20g/$m^2$ of basis weight of mulch paper was possible by the appropriate raw material selection and application of strength resin. To use the mulch papers in paddy fields, however, further research to improve its durability should be pursued.
In geo-spatial information system building and operation, metadata is one of the crucial factors. Therefore, international and domestic organizations or associations for standardization have developed and distributed geo-based standard metadata to meet public demands. However, because metadata is composed of complicated elements and needs XML storage and management, individual organization which implement and operate practical application system is inclined to define and use its own metadata specifications. In this study, metadata extraction program, that metadata elements are directly extracted from geo-based file formats was developed to easily utilize standard metadata such as ISO/TC 19115, TTAS.KO-10.0139 and TTAS.IS-19115, and those elements are processed into XML. Furthermore, geo-based images sets are applied to another metadata of ISO/TC 19115-2. As well, metadata transformation is needed due to inconsistent or non-corresponding definition among standard metadata; in this program, transformation modules are also implemented to interoperable uses between standard metadata specifications. Widely used data formats are dealt with in this program, but extension for other formats and other metadata specifications is possible, and it is expected that availability of standard metadata is increased, through this kind of development.
This study was conducted to evaluate the effects of weed control and lodging reduction in the cultivation of buckwheat. The effect of weed control was significant. In the herbicide plot, nevertheless, grain yield and plant height were more decreased than habitual and vinyl mulching plots. Therefore, the application of herbicide was considered unnecessary in buckwheat cultivation having short growth period. In the habitual plot, dominant weed species are Digitaria sanguinalis, Erigeron annuus, E. canadensis, Setaria viridis, and Stellaria alsine var. undulata. On the effect of plant dwarf agent, C.C.C. and TIBA, plant height became shorter than habitual plot but the grain yield decreased. The latter tip pinching time, the less in grain yield which indicate tip pinching is ineffective in grain yield and lodging reduction. Among the wild species and cultivars of Fagopyrum, F. urophyllum was differentiated into xylem and phloem tissues indicating woody plant. Stem hardness of this species was the hardest as 625,110,000 dyne/cm$^2$which is at least 3.5 times harder than F. esculentum cv. Suwon #12. Therefore, it needs that the woody habitat gene of F. urophyllum is transfered into other cultivars in buckwheat breeding strategy.
The purpose of this study examined the feasibility and efficacy of a senior center-based diabetes self-management program applying action research approach. The cyclical action research method was applied for this study: plan, act, evaluate, and reflect in delivering three waves of the intervention program. Three waves of a 12 weeks-length small group diabetes self-management program were offered during the period of 15 months in a senior center in Seoul. Planning of $2^{nd}$ and $3^{rd}$ wave program were based on reflection of $1^{st}$ and $2^{nd}$ program evaluation respectively. Among the 46 participants, 93.48% (N=43) completed the program. The quantitative evaluation showed statistically significant improvement in HbA1C(p<.001), fasting plasma glucose(p<.001), BMI(p=.016), waist circumference(p=.001), systolic blood pressure(p=.036), diabetes self-management behavior(p<.001) and health knowledge(p=.008). Qualitative data revealed that individual management was very helpful in empowering and adhering for own diabetes care for the participants. Participants reported high satisfaction towards the program with mean satisfaction score of 65.12. Application of the Diabetes Self-management program with action study strategy was successful in community setting for improving participants' subjective and objective outcomes. Action research method guides the practitioner to tailor the program to respond for the participants and field needs.
이메일무단수집거부
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.