• Journal of Broadcast Engineering
• /
• v.9 no.1
• /
• pp.83-90
• /
• 2004

DVB-MHP recommends that NPT(normal play time) be used as the times of stream events. NPT is the local time within an event(TV program). But we found that commercial transport stream (TS) generators and middlewares for DVB-MHP settop boxes are not ready to support the use of NPT by applications. In particular, TS generators do not create NPT reference descriptors needed to reconstruct NPT at the TV receiver. This situation is undesirable because program providers cannot experiment with the idea of synchronized applications. So we have implemented a TS generator that inserts NPT reference descriptors to TS and MyGetNPT API to approximately reconstruct NPT. STC (system time clock) is needed to reconstruct NPT, but Xlets are not allowed to read it. So, we approximate STC by using PCR (program clock reference) and the Java system tune. In this method, the stream generator extrats PCRs from an existing TS and inserts them into null TS packets in the form of MPEG sections, which can be read by Xlets. Because PCRs are displaced into new positions in TS, their values should be adjusted based on the time intervals between the original positions and the new positions. We implemented a synchronized application by using our TS generator and MyGetNPT API, where the task of stream events are to display graphic images. We found that graphic images are displayed where 240 ㎳ from their intended time, where 240ms is a human tolerance for the synchronization skew between graphic image and video.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.9
• /
• pp.40-49
• /
• 2011

Integrating massive components and low-power policies have been actively investigated for system-on-chip designs. But in recent years, finding the optimal interconnection structure among heterogeneous components has emerged as a critical system design issue. Therefore, various simulation tools to model interconnection designs are being developed and performance evaluation of simulation is reflected in the real design. But most of the simulation environments employ traffic generation based on the mathematical probability functions, and such traffic generation cannot fully cover for various situations that may be occurred in the real system. Therefore, the demand for traffic pattern generation based on real applications is increasing. However, there have been few simulators that adopt application-specific traffic generators. This paper proposes a novel traffic generation method in simulating various interconnection structures for multi-processor system-on-chip design. The proposed traffic generation method can generate traffic patterns that can reflect the actual characteristics of the application and evaluate the performance of an interconnection structure under more realistic circumstance than traffic patterns using mathematical probability functions. By comparing the differences between the proposed method and the one based on mathematical probability functions, this paper shows advantages of the proposed traffic generation method.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.1
• /
• pp.45-52
• /
• 2023

The power generation method using expensive diesel has operation problems such as high cost diesel generator and a lack of reserved power due to increase of power demand in some islands, requiring expansion of power generation facilities. To solve this problems, it is necessary to improve the efficiency of power generation facilities through an ORC(Organic Rankin Cycle) system application that uses waste heat as a heat source. Therefore, localized application technology of price competitive and highly reliable ORC power generation system is needed, and optimization technology of generators is having great effect, so this study performed two generator designs to get a high-efficiency generator with an optimized 30kW output. The comparison of simulation data for two designed models showed that a generator with SPM factor of 46.2% had an efficiency of 92.1% and a power ouput of about 23.2kW based on 12,000rpm, a generator with SPM factor of 44.46%, had a power output of 27.9kW and efficiency of 93.6% based on above rpm. For the verification of improved design model with SPM factor of 44.46%, the prototype test system with 110kW motor dynamometer was installed and got to the efficiency of 92.08% with conditions of the rated capacity 25kW at 12,000rpm, the test results of prototype generator showed the validity of generator design.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.15 no.4
• /
• pp.561-567
• /
• 1996

As nuclear industry in Korea is being expended, the number of user for radioisotope and radiation generators has being remarkably increased. As a result, radiation shielding problem for radiation safety has rasied as a question of great interest nowaday. In this report, gamma scanning test (GST), one of the nondestructive test methods of radiation shielding material was introduced and the review of the test method and its application were described. In addition for accurate evaluation of the test result, necessary basic equipments for the test and for improvement of the equipment were suggested. If the effective test method described above were widely and properly applied by GST related companies, the technology would be used effectively, as one of the safe nondestructive test for radiation shielding material in future.

• 한국전산유체공학회:학술대회논문집
• /
• 2009.04a
• /
• pp.19-19
• /
• 2009

Dynamic Stall is a flow phenomenon which occurs on the retreating side of helicopter rotor blades during forward flight. It also occurs on blades of stall regulated wind turbines under yawing conditions as well as during gust loads. Time scales occurring during this process are comparable on both helicopter and wind turbine blades. Dynamic Stall limits the speed of the helicopter and its manoeuvrability and limits the amount of power production of wind turbines. Extensive numerical as well as experimental investigations have been carried out recently to get detailed insight into the very complex flow structures of the Dynamic Stall process. Numerical codes have to be based on the full equations, i.e. the Navier-Stokes equations to cover the scope of the problems involved: Time dependent flow, unsteady flow separation, vortex development and shedding, compressibility effects, turbulence, transition and 3D-effects, etc. have to be taken into account. In addition to the numerical treatment of the Dynamic Stall problem suitable wind tunnel experiments are inevitable. Comparisons of experimental data with calculated results show us the state of the art and validity of the CFD-codes and the necessity to further improve calculation procedures. In the present paper the phenomenon of Dynamic Stall will be discussed first. This discussion is followed by comparisons of some recently obtained experimental and numerical results for an oscillating helicopter airfoil under Dynamic Stall conditions. From the knowledge base of the Dynamic Stall Problems, the next step can be envisaged: to control Dynamic Stall. The present discussion will address two different Dynamic Stall control methodologies: the Nose-Droop concept and the application of Leading Edge Vortex Generators (LEVoG's) as examples of active and passive control devices. It will be shown that experimental results are available but CFD-data are only of limited comparison. A lot of future work has to be done in CFD-code development to fill this gap. Here mainly 3D-effects as well as improvements of both turbulence and transition modelling are of major concern.

• Journal of Energy Engineering
• /
• v.14 no.4 s.44
• /
• pp.241-247
• /
• 2005

Heat transfer enhancement and pressure loss penalty caused by three-row winglets built in three-row tube-bundles in an in-line arrangement, are compared between 'common flow up' and 'common flow down' winglet configurations. The 'common flow down' winglet-pairs recommended by the previous researchers bring about $10\%$ to $25\%$ increase in heat transfer enhancement and $20\%$ to $35\%$ increase in pressure loss penalty, in comparison with fin-tube bundles without winglets. For the 'common flow up' winglet-pairs, the spanwise distance between the trailing edges (${\Delta}y$) of winglet pairs was changed and investigated. Two types ot winglet are applied for triangular and rectangular shapes. In the triangular winglets with ${\Delta}y$=5 mm in in-line tube bundles, the heat transfer increased up to $10\%$, and simultaneously the pressure loss decreased by $8\%$ to $15\%$ for the Reynolds number (based on two times channel height) ranging from 300 to 2700, when the 'common flow up' winglets were built in. The performance of fin-tube bundles with triangular winglets is much superior to the rectangular one, because of the smaller pressure-loss penalty.

• Journal of KIISE:Software and Applications
• /
• v.29 no.12
• /
• pp.947-956
• /
• 2002

It is advantageous to use XML in developing user interfaces, since XML is independent from platforms and languages and it is easy to learn and use. The existing XML-based languages do not adopt formal model, and they are developed in ad hoc manner. Moreover, they provide limited facilities to handle user events, and combine user interface components with internal logics. In this paper, we introduce an extended MVP (EMVP) model, which is extended from MVP (Model-View-Presenter), and XUIML, which is a new XML application based on the EMVP to support user interface. XUIML provides useful methods to build user interface, including methods to describe actions on user events, data flows between objects, and internal logics. The XUIML system provides two style editors - text editor and graphic editor. It also provides two code generators. One generates Java source, and the other generate C# code from XUIML document. The XUIML graphic editor allows users to manipulate XML elements directly, and we can gain high productivity with the graphic editor.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.12
• /
• pp.1077-1082
• /
• 2008

To fabricate a multi-layered piezoelectrics/electrodes structure, the piezoelectrics should be sintered at the temperature lower than $950^{\circ}C$ to use the silver electrode, which is cheaper than the electrodes containing noble metals such as Pd and Pt. Therefore, in this study, we modified the composition of $Pb(Zr,Ti)O_3$-based material as $(Pb_{0.98}Cd_{0.02})(Ni_{1/3}Nb_{2/3})_{0.25}Zr_{0.35}Ti_{0.4}O_3$ to lower the sintering temperature and to improve the piezoelectric properties. Small amount of $MnCO_3$, $SiO_2$, and $Pb_3O_4$ were also added to lower the sintering temperature of the ceramic. The prepared raw powders were mixed by using a ball mill for 24 hours. And then the mixed powders were calcinated for 2 hours at $800^{\circ}C$. The calcinated powders were again crushed with the ball mill for 72 hours. The final powders were pressed for making the shape of ${\emptyset}15\;mm$ disk. The disk-type samples were sintered at temperature range of $850{\sim}950^{\circ}C$. The crystal phases of the sintered specimens were perovskite structure without secondary phases. All of the measured electrical properties such as electromechanical coupling coefficients ($k_p$), mechanical quality factors ($Q_m$), and piezoelectric charge constants ($d_{33}$) were decreased with decreasing the sintering temperatures. The electrical properties measured at the sample sintered at $950^{\circ}C$ were 54% of $k_p$, 503 of $Q_m$, and 390 pC/N of $d_{33}$, respectively. These properties were considered to be fairly good for the application of multi-layered piezoelectric generators or actuators.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.4
• /
• pp.1442-1448
• /
• 2017

Recently, electric power systems have been operating with tight margins and have reached their operational limits. Many researchers consider a microgrid as one of the best solutions to relieve that problem. The microgrid is generally powered by renewable energies that are connected through power converters. In contrast to the rotational machines in the conventional power plants, the converters do not have physical rotors, and therefore they do not have rotational inertia. Consequently, a stand-alone microgrid has no inertia when it is powered by the only converter-based-generators (CBGs). As a result, the relationship between power and frequency is not valid, and the grid frequency cannot represent the power balance between the generator and load. In this paper, a superconducting flywheel energy storage system (SFESS) is applied to an inertia-free stand-alone (IFSA) microgrid. The SFESS accelerates or decelerates its rotational speed by storing or releasing power, respectively, based on its rotational inertia. Then, power in the IFSA microgrid can be balanced by measuring the rotor speed in the SFESS. This method does not have an error accumulation problem, which must be considered for the state of charge (SOC) estimation in the battery energy storage system (BESS). The performance of the proposed method is verified by an electromagnetic transient (EMT) simulation.

• Journal of Satellite, Information and Communications
• /
• v.10 no.3
• /
• pp.38-43
• /
• 2015

This paper describes a GPS signal generator that can generate multiple satellite signals in real time at the RF level. It realizes the verified software algorithm on a FPGA. The algorithm models orbits and environmental errors such as ionospheric and tropospheric multipath. The position of a simulated receiver is one of simulation parameters. The hardware which consists of a digital logic board and an analog board can generate 16 simulated satellites signals at the same time. The users can generate spoofing signals and jamming signals as well as satellite signals by using the windows-based control software. In addition, the software provides GIS-based simulation scenarios editing tools. We verified the generator by using commercial receivers. As an application, we configured generators as indoor positioning systems and tested them in a building. To improve the accuracy of indoor systems is our further study.