• Food Science of Animal Resources
• /
• v.26 no.1
• /
• pp.64-69
• /
• 2006

This study was conducted to determine the effect of pH adjustment on physico-chemical characteristics of chicken breast surimi. The chicken breast meat was ground with distilled water, of which pH was then adjusted to 2.5 (T1), 3.0 (T2), 10.5 (T3) and 11.0 (T4) for surimi manufacture, respectively. Water content was higher in order of T4>T1>T3>T2 (p<0.05). Crude protein and crude fat were higher in T3 and T4 compared with T1 and T2 (p<0.05). $L^*$ values, myofibrillar protein and water holding capacity of T2 and T4 were higher than those of T1 and T3 (p<0.05). T4 had the lowest yield among the treatments (p<0.05). T1 was higher in yield and pH, whereas breaking force and deformation were higher in T1 (p<0.05). $a^*$ was higher in order of T3>T2>T4>T1 and $b^*$ was lower in T1 compared with other treatments (p<0.05). In textural properties, the chewiness values of T2 and T3 were higher than those of T1 and T4, the hardness was higher in order of T2>T3>T4>T1 (p<0.05). Cohesiveness and gumminess of T1 showed higher values than those of other treatments (p<0.05). In sensory evaluation, the note for appearance was higher in T2 than other treatments (p<0.05), however other traits were not significantly different (p>0.05). Therefore, the alkaline processing (T4, pH 11.0) would be recommended.

• Culinary science and hospitality research
• /
• v.18 no.4
• /
• pp.243-254
• /
• 2012

The purpose of this study is to rapidly produce a sauce using paprika powder in a short period. The test results of moisture content, pH, salinity, color, texture, reducing sugar, amino-nitrogen, and sensory testing are as follows. The water content of sauce (CON) using paprika powder was 26.31%, whereas 31.58% in SP1, 31.40% in SP2, 30.84% in SP3, and 24.08% in SP4. pH value increased with increasing paprika powder (P<0.001). Salinity ranged from 4.87% to 5.22%, which showed a lower value than that of a former study. In terms of color, SP3 showed the highest L value (28.01), and CON showed the highest a and b values (P<0.001). In textural properties, CON showed the highest hardness of 205.50, whereas SP3 showed the lowest hardness of 106.53. Contrary to the results for hardenss (ED:?) CON showed the lowest adhesiveness which was -704.17, SP3 showed the highest value which was -348.93. SP1, and SP2 showed the highest reducing sugar value (P<0.001), and SP1 and SP4 showed the highest and lowest values of amino-nitrogen, respectively (P<0.001). In the results of sensory tesating, SP2 showed the greatest appearance and flavor, but was not found to be significantly different to any of the others. CON, SP1 and SP2 showed the best texture(P<0.05) and SP2 showed the best interest among them with no significant difference. According to these results, SP2 made with 200g of paprika powder, 150g of soy powder, 600g of grain syrup, 500g of water, and 75g of salt showed the highest sensory interest value and was determined to be the most suitable for making the paprika sauce.

• Journal of the East Asian Society of Dietary Life
• /
• v.19 no.1
• /
• pp.52-61
• /
• 2009

In this study, we evaluated the effects of sesame powder on the fermentation of Baechukimchi, by assessing sensory, physicochemical, and microbiological properties during up to 25 days of fermentation. The Baechukimchi, with various levels [0, 1, 2, 3, 4%(w/w)] of sesame powder, was fermented at $10^{\circ}C$. The product containing the control and 1% sesame powder evidenced the highest scores for appearance and smell. Taste and texture were highest in the 1% and 2% sesame powder, and the overall acceptability was highest in the 2% sesame powder sample. During fermentation, titratable acidity increased while pH gradually decreased. pH was higher in the sample with sesame powder than in the control, and the titratable acidity increased with increasing sesame powder content on day O. Reducing sugar increased sharply during fermentation, and then gradually decreased. In particular, the 2% sesame powder sample maintained the highest content. Total vitamin C was slightly increased at initial fermentation and then steadily decreased. The total polyphenol content and antioxidant effect of the experimental groups with added sesame powder were higher than those of the controls. Additionally, the time required to achieve maximum levels of lactic acid bacteria, as determined by log numbers of cells and total viable cells, were more delayed in the experimental groups with added sesame powder than in the controls. Our results indicated that the Baechukimchi with $1{\sim}2%$ added sesame powder was acceptable.

• Food Science of Animal Resources
• /
• v.25 no.1
• /
• pp.20-25
• /
• 2005

This study was conducted to evaluate the effects of Zizyphus vulgaris supplementation on growth performance, blood cortisol and meat quality characteristics in finishing pigs. The total of thirty-six [Duroc${\times}$Yorkshir${\times}$Landrace] pigs ($91{\pm}2.11$ kg average initial body weight) were used in a 30-days assay. Dietary treatments included 1) CON (basal diet), 2) T1 (basal diet for 15 days and 0.1 % Zizyphus vulgaris for 15 days) and 3) T2 (0.1 % Zizyphus vulgaris for 30 days). The ADG (Average daily gain), ADFI (Average daily feed intake) and ADG/ADFI during the feeding period were not significantly differences among the treatments (p>0.05). Backfat thickness of pigs fed CON was higher than those of T1 and T2 (p<0.05). The appearance rate of A or B carcass grade was in T1 (74%) and T2 (84%) was significantly higher than that in CON (58%) (p<0.05). Pigs fed Zizyphus vulgaris 0.1 % for 30 days tended to decrease on blood cortisol compared with pigs fed CON and T1. But, there was not significantly difference among the treatments (p>0.05). The Hunter's L/sup */ (lightness) value of loin in the pork fed CON was higher than that of loin in the pork fed T1 and T2 (p<0.05). After 7 days, the L/sup */ value of loin in the pigs fed T2 was higher increased than that of pigs fed T1 and CON (p<0.05). However, a/sup */ and b/sup */ values were not affected by dietary Zizyphus vulgaris (p>0.05). There were not found remarkable differences in sensory properties (marbling, firmness and color) among the treatments. The results from the present study suggest that Zizyphus vulgaris could be a effective feed additive to improve meat quality of pigs. However, further research is needed to investigate effects of carcass characteristics.

• Korean Journal of Food Science and Technology
• /
• v.29 no.3
• /
• pp.502-508
• /
• 1997

Rice bran dietary fiber extract, which was obtained after termamyl treatment of defatted rice bran contained $27.3{\sim}30.5%$ protein, $49.7{\sim}54.1%$ insoluble dietary fiber, and $1.9{\sim}2.7%$ soluble dietary fiber. Extrusion decreased the insoluble dietary fiber content but increased the soluble dietary fiber content, while roasting did not. Influence those content. Each mineral element content was depended upon heat processing method. Extrusion increased the water binding capacity and L value, while roasting reduced the water binding capacity and L value. Scanning electron microscopy showed damaged cell walls for extruded sample compared to roasted one which had fully collapsed cell walls. The increase of water absorption, developing time, and stability and the of MTI of wheat flour-dietary fiber extract composites with addition of dietary fiber extract were observed by Farinograph. Rice bran dietary fiber extract had an effect on the bread making resulting in increase of bread weight and color of crumb and crust, and decrease of bread volume and texture. As a result of sensory evaluation, appearance, texture, overall acceptability were significantly different from control but flavor and taste were not different significantly up to 6% level. Heat treated samples had differences in mean values, but not significant differences statistically.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.3
• /
• pp.435-443
• /
• 2011

In this study, we evaluated the effects of harvey powder on the fernentation of Yulmoo Kimchi, by measuring sensory, physicochemical, and microbiological properties during fermentation up to 31 days. The Yulmoo Kimchi, with various levels [0, 0.1, 0.2, 0.3, 0.4% (w/w)] of harvey powder, was fermented at $10^{\circ}C$. The product containing the control evidenced the highest scores for appearance and smell. Taste, carbonated taste, texture and overall acceptability were highest in the 0.1% harvey powder and control. During fermentation, titratable acidity increased while pH gradually decreased. Reducing sugar showed no difference at initial fermentation and then steadily decreased. Total vitamin C was gradually decreased during fermentation and reduced sharply after 10 days, and then almost maintained. Total polyphenol content was the highest in the 0.3% harvey powder on day 0 and maintained in all samples thereafter. Antioxidant effect of the Yulmoo Kimchi with 0.1% harvey powder was shown to be the highest. Also, the time required to achieve maximum levels of lactic acid bacteria, as determined by log numbers of cells and total viable cells, were more delayed in the experimental groups with added harvey powder than in the controls. Our results indicated that the Yulmoo Kimchii with below 0.1% added harvey powder was acceptable.

• Food Science and Preservation
• /
• v.10 no.4
• /
• pp.476-481
• /
• 2003

As its high functional properties to be used as medicine or food, the cultivation of Agaricus mushroom has been expanded and iぉ commercialization required better storage methods that can extend its functional and nutritional value for longer period. We selected drying as the most plausible method to meet such requirement, and several drying conditions were investigated to locate the optimum drying condition that can be used to keep the quality of mushroom. Drying temperature of 50$^{\circ}C$, 60$^{\circ}C$, 100$^{\circ}C$ were selected to trace the drying time required to achieve the moisture content of mushrooms less than 10%. The drying temperature at 50$^{\circ}C$ required 29 hrs of drying time, while 100$^{\circ}C$ required only 10 hrs of drying tune. However, their quality characteristics on the following categories, on the degree of browning and color were investigated to find the optimum drying condition. In addition, sensory evaluation was conducted to evaluate the quality of dried mushrooms produced by each drying condition. The browning of the mushroom was evidently increased as the higher drying temperature was used and 50$^{\circ}C$ drying produced the most desirable quality of all in pileus or stipe. The aeon of browning intensified by drying temperature was comparable to the result of whiteness index value, which resulted lower L values as drying temperature increased. and the 50$^{\circ}C$ drying resulted the most highest L values among all drying samples. As the browning and whiteness results implied, the sensory evaluation result gathered from the present research indicated that the 50$^{\circ}C$ drying was the most favorable drying condition by scoring the most highest average scores on flavors, color, appearance, and overall acceptability conducted by the 10 evaluation panels.

• Food Science and Preservation
• /
• v.20 no.1
• /
• pp.14-22
• /
• 2013

The effects of the initial storage temperature and the PA film packaging on the extension of the shelf-life and the improvement of the postharvest storage quality of muskmelons were studied during their storage. Their storage quality was tested as follows: PA-film-wrapped muskmelons, stored at $2^{\circ}C$ or $7^{\circ}C$ for 30 days after their harvest, were kept at $10^{\circ}C$ for 27 days (total: 57 days). On the fifth day of storage at $10^{\circ}C$ (35th day overall), the weight loss reached 6.4% in the 7-control. However, the 2-PA showed the smallest loss of 2.2%. The soluble solids content and the acidity that were measured before the storage were $10.8^{\circ}Brix$ and 0.26% in all the groups. After 27 days of storage at $10^{\circ}C$ (on the 57th day overall), the values were highest in the 2-PA group with $9.7^{\circ}Brix$ and 0.15%, respectively. Microorganisms were not detected at first; but on the fifth day of storage at $10^{\circ}C$ (35th day overall), their values were 3.87 and 2.68 log CFU/g in the seven-control and the 2-PA, respectively. In other words, the 2-PA was found to be more effective in inhibiting microbial proliferation. In relation to sensory properties such as appearance, flavor, sweetness and chewiness, the 2-PA was superior to the other groups and was found to be most effective in improving the storability of muskmelons. In conclusion, it was found that low-temperature injury and fast storage quality deterioration did not occur in film-wrapped muskmelons that were stored at $2^{\circ}C$ for 30 days after they were harvested.

• Korean Journal of Weed Science
• /
• v.7 no.1
• /
• pp.90-97
• /
• 1987

An attempt was done at the Yeongnam Crop Experiment Station in 1986-'87 to obtain herbicide tolerant variant through cell culture. Immatured rice grain was more rapidly and efficiently formed callus in dehulled rice culture method for both rice cultivar types, Tongil type (Indica/Japonica) and Japonica-type. However, Japonica-type cultivar was generally superior than Tongil-type Cultivar in callus formation. Expression rate of herbicide tolerant variant varied depending upon rice cultivar, plant species and herbicide properties. In case of Nagdongbyeo (Japonica) at the first subculture, 46.3% of total callus pieces appeared as herbicide tolerant variant in herbicide media of CGA142464 and followed by NC-311 (11.6%), Butachlor (7.5%), 2.4-D (2.1%), Quinclorac (0.89%), and Propanil (0.25%), in order. This degree of appearance of herbicide tolerant variants rapidly increased as passage of subculture was advanced. Herbicide tolerant callus hardly regenerated as normal plant even though large variations exhibited among culture media.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.06a
• /
• pp.16-23
• /
• 2000

The increasing functional needs of top-quality printing papers and packaging paperboards, and especially the rapid developments in electronic printing processes and various computer printers during past few years, set new targets and requirements for modern paper quality. Most of these paper grades of today have relatively high filler content, are moderately or heavily calendered , and have many coating layers for the best appearance and performance. In practice, this means that many of the traditional quality assurance methods, mostly designed to measure papers made of pure. native pulp only, can not reliably (or at all) be used to analyze or rank the quality of modern papers. Hence, introduction of new measurement techniques is necessary to assure and further develop the paper quality today and in the future. Paper formation , i.e. small scale (millimeter scale) variation of basis weight, is the most important quality parameter of paper-making due to its influence on practically all the other quality properties of paper. The ideal paper would be completely uniform so that the basis weight of each small point (area) measured would be the same. In practice, of course, this is not possible because there always exists relatively large local variations in paper. However, these small scale basis weight variations are the major reason for many other quality problems, including calender blacking uneven coating result, uneven printing result, etc. The traditionally used visual inspection or optical measurement of the paper does not give us a reliable understanding of the material variations in the paper because in modern paper making process the optical behavior of paper is strongly affected by using e.g. fillers, dye or coating colors. Futhermore, the opacity (optical density) of the paper is changed at different process stages like wet pressing and calendering. The greatest advantage of using beta transmission method to measure paper formation is that it can be very reliably calibrated to measure true basis weight variation of all kinds of paper and board, independently on sample basis weight or paper grade. This gives us the possibility to measure, compare and judge papers made of different raw materials, different color, or even to measure heavily calendered, coated or printed papers. Scientific research of paper physics has shown that the orientation of the top layer (paper surface) fibers of the sheet paly the key role in paper curling and cockling , causing the typical practical problems (paper jam) with modern fax and copy machines, electronic printing , etc. On the other hand, the fiber orientation at the surface and middle layer of the sheet controls the bending stiffness of paperboard . Therefore, a reliable measurement of paper surface fiber orientation gives us a magnificent tool to investigate and predict paper curling and coclking tendency, and provides the necessary information to finetune, the manufacturing process for optimum quality. many papers, especially heavily calendered and coated grades, do resist liquid and gas penetration very much, bing beyond the measurement range of the traditional instruments or resulting invonveniently long measuring time per sample . The increased surface hardness and use of filler minerals and mechanical pulp make a reliable, nonleaking sample contact to the measurement head a challenge of its own. Paper surface coating causes, as expected, a layer which has completely different permeability characteristics compared to the other layer of the sheet. The latest developments in sensor technologies have made it possible to reliably measure gas flow in well controlled conditions, allowing us to investigate the gas penetration of open structures, such as cigarette paper, tissue or sack paper, and in the low permeability range analyze even fully greaseproof papers, silicon papers, heavily coated papers and boards or even detect defects in barrier coatings ! Even nitrogen or helium may be used as the gas, giving us completely new possibilities to rank the products or to find correlation to critical process or converting parameters. All the modern paper machines include many on-line measuring instruments which are used to give the necessary information for automatic process control systems. hence, the reliability of this information obtained from different sensors is vital for good optimizing and process stability. If any of these on-line sensors do not operate perfectly ass planned (having even small measurement error or malfunction ), the process control will set the machine to operate away from the optimum , resulting loss of profit or eventual problems in quality or runnability. To assure optimum operation of the paper machines, a novel quality assurance policy for the on-line measurements has been developed, including control procedures utilizing traceable, accredited standards for the best reliability and performance.