• Korean Journal of Food Science and Technology
• /
• v.35 no.5
• /
• pp.865-870
• /
• 2003

The effects of storage atmosphere on the physicochemical and organoleptic properties of Asian pears (Pyrus pyrifolia Nakai cv. Niitaka) were investigated. The pears were stored at $0^{\circ}C$ for up to 8 months under CA conditions (3 kPa $O_2$＋1 kPa $CO_2$, 1 kPa $O_2$+5 kPa $CO_2$, 1 kPa $O_2$+1 kPa $CO_2$) controlled by a static system or air (21 kPa $O_2$+0 kPa $CO_2$). CA conditions retarded the loss of weight, flesh firmness, organoleptic properties (appearance, aroma, sweetness, texture), and the development of injuries in the fruits during storage. Low $O_2$ plus high $CO_2$ conditions maintained the highest flesh firmness. In addition, low $O_2$ reduced injuries more than the other conditions. Skin color (lightness, chroma, hue), soluble solids, titratable acidity, pH and vitamin C were unaffected by storage atmosphere.

• Korean Journal of Food Science and Technology
• /
• v.35 no.1
• /
• pp.84-91
• /
• 2003

The effects of different dehydration conditions for the removal of ginkgo nut inner coat on peeled ginkgo nuts were examined using physical and sensory methods. Dehydration of ginkgo nuts at $90^{\circ}C$ for 120 min resulted in greater hardness, lightness (L), redness (a), yellowness (b), and firmness. Higher roasted flavor and larger holes were observed with dehydration at $150^{\circ}C$ for 30 min and greater cooked ginkgo flavor and green color with dehydration at $120^{\circ}C$ for 50 min. Based on these findings, dehydration at $120^{\circ}C$ for 50 min was determined as the adequate hot air dehydration condition for the removal of ginkgo nut inner coat. Ginkgo nuts stored at $25^{\circ}C$ maintained overall desirability up to 4 weeks. In ginkgo nuts stored at $4^{\circ}C$, all sensory desirabilities evaluated were reasonably high until 60 days of storage; desirability of appearance decreased moderately at 80 days of storage, and appearance became very undesirable at 180 days. Ginkgo nuts stored at $-18^{\circ}C$ showed little changes until 10 months of storage, but slight decreases in overall desirability, flavor, and texture were noted at 12 months.

• Applied Biological Chemistry
• /
• v.30 no.2
• /
• pp.109-117
• /
• 1987

Three rice varieties of Akibare (japonica), Milyang 30 (indica) and Taebaeg (indica) were investiated for sensory and physical qualities of cooked rices during storage at the temperature range of $4^{\circ}C$ and $70^{\circ}C$ for 25 hours. The qualities studied were sensory attributes of odor, taste and appearance which were evaluated by multiple comparison method. The other properties were size of rice granule and separation Property of individual cooked rices in water. The sensory results showed that all of the descriptions except moldy odor and oily taste were scored higher values for cooked rices of Akibare than those values of Milyang 30 and Taebaeg. It was found that storage of cooked rices at various temperatures resulted a significant decrease in most of sensory qualities except moldy odor and oily taste which were rather increased. The quality change was more affected at storage at low temperature, particularly at $4^{\circ}C$, than at higher temperatures. The property of individual separation of cooked rices in water for freshly cooked rices showed that Akibare was separated 44.4% after 1 minute shaking while Milyang 30 and Taebaeg had the higher separation value of 53.1%, and 51.0%, respectively. This characteristic was noticeably reduced after 3 hours storage and then steady increased during further storage. It was also found that the separation percent was generality increased as the storage temperature increased from $4^{\circ}$ to $70^{\circ}C$.

• Elastomers and Composites
• /
• v.34 no.2
• /
• pp.156-176
• /
• 1999

Rubber chemicals such as accelerators, antidegradants, vulcanizing agents, processing agents and retarders are very important to the production and protection of tires and rubber goods. The use of accelerators and antidegradants are evaluated in various tire components. This paper will focus on how to vulcanize tires economically and maintain the physical properties of each tire component without severe degradation due to oxygen, heat and ozone. Also, new non-nitrosoamine accelerators and non-staining antiozonants will be discussed. Lastly, the future requirements of antidegradants and accelerators in the tire industry will be reviewed. Tires have been vulcanized with Sulfenamides as primary accelerators and either Guamdine's or Thiurams as secondary accelerators to achieve proper properties at service conditions. However, interior components such as the carcass can be vulcanized with Thiazoles as a primary accelerator to cure faster than the external components. Using the combination of Sulfenamide with secondary accelerators in a tire tread compound and the combination of a Thiazole and Guanidine in a carcass compound will be presented with performance data. Uniroyal Chemical and another Rubber Chemical Manufacturer have developed, "Tetrabenzyl Thiuram Disulfide," (TBzTD) as a non-Nitrosoamine accelerator, which could replace Nitrosoamine generating Thiurams. This new accelerator has been evaluated in a tread compound as a secondary accelerator. Also, Flexsys has developed N-t-butyl-2-benzothiazole Sulfenamide (TBSI) as a non-Nitrosoamine accelerator which could replace 2-(Morpholinothio) -benzothiazole (MBS), a scorch delayed Sulfendamide accelerator. TBSI has been evaluated in a Natural Rubber (NR) belt skim compound vs. MBS. An optimum low rolling resistant cure system has been developed in a NR tread with Dithiomorpholine (DTDM). Also, future requirements for developing accelerators will be discussed such as the replacement of DTDM and other stable crosslink systems. Antidegradants are divided into two different types for use in tire compounds. Internal tire compounds such as apex, carcass, liner, wire breaker, cushion, base tread and bead compounds are protected by antioxidants against degradation from oxygen and heat due to mechanical shear. The external components such as sidewall, chafer and cap tread com-pounds are protected from ozone by antiozonants and waxes. Various kinds of staining and non-staining antioxidants have been evaluated in a tire carcass compound. Also, various para-phenylene diamine antiozonants have been evaluated in a tire sidewall compound to achieve the improved lifetime of the tire. New non-staining antiozonants such as 2, 4, 6-tris-(N-1, 4-dimethylpentyl-p-phenylene diamine) 1, 3, 5 Trizine (D-37) and un-saturated Acetal (AFS) will be discussed in the tire sidewall to achieve better appearance. The future requirements of antidegradants will be presented to improve tire performance such as durability, better appearance and longer lasting tires.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.5
• /
• pp.61-69
• /
• 2024

The Geonjae Old House Garden of Asan Oeam Village contains historical and academic values as a major element of the village's landscape, along with the village's feng shui geographical conditions and artificial roads that pass through the village, which represent the village. Although some have been maintained over a long period of time, many of them have been lost, disturbed, and distorted. The main houses of Oeam Village had traditional gardens, but the garden of the Geonjae Old House is a place where different garden cultures coexist in one place due to the creation of Japanese-style gardens in Japanese colonial era. This study predicts the past through genetic analysis of the garden of the Geonjae Old House, and establishes a restoration plan for the garden of the Geonjae Old House through historical restoration of the results. In addition, the purpose of this study is to suggest a way to avoid damage in restoring the original form of cultural properties as much as possible and to facilitate the preservation and management of cultural properties. As a result of contrast with past photographs and on-site evidence, it was found that the garden of the Geonjae Old House has a different shape from its previous appearance due to repeated distortion and damage. In addition, it was possible to suggest a restoration method that could reproduce the appearance of the past through genetic analysis.

• The KIPS Transactions:PartA
• /
• v.11A no.5
• /
• pp.365-372
• /
• 2004

Recently, the studies for mesh simplification have been increased according to the application area of the complicate 3D mesh models has been expanded. This paper introduces a novel method for mesh simplification which uses the properties of the mesh model in addition to the geometric locations of the model. The information of the 3D mesh model Includes surface properties such as color, texture, and curvature information as well as geometic information of the model. The most of current simplification methods adopt such geometric information and surface properties individually for mesh simplification. However, the proposed simplification method combines the geometric information and solace properties and applies them to the simplification process simultaneously. In this paper, we exploit the extended geometry based quadric error metric(QEM) which relatively allows fast and accurate geometric simplification of mesh. Thus, the proposed mesh simplification utilizes the quadric error metric based on geometric information and the surface properties such as color, normal, and texture. The proposed mesh simplification method can be expressed as a simple quadric equation which expands the quadric error metric based on geometric information by adding surface properties such as color, normal, and texture. From the experimental results, the simplification of the mesh model based on the proposed method shows the high fidelity to original model in some respects such as global appearance rather than using current geometry based simplification.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.12
• /
• pp.1762-1768
• /
• 2016

The objective of this study was to investigate the physicochemical properties of rice flour at different degrees of milling (DOM) and their influence on cooking, color, textural, and sensory properties of rice noodles. Higher DOM flour resulted in higher value of lightness and lower value of yellowness. Transition temperatures of rice flour were not significant, whereas the enthalpy of gelatinization increased with an increase in milling degree. Rice noodles were prepared with rice flours of DOM, and their quality and sensory properties were investigated. Cooking properties of rice noodles were not affected by DOM; however, color values were affected by DOM. In textural properties, values of hardness and chewiness of rice noodles were significantly reduced with an increase in milling degree. The sensory scores for overall acceptability, appearance, and texture were highest in higher DOM noodles (DOM 10% and DOM 12%).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.173-173
• /
• 2010

$Bi_4Ti_3O_{12}$ ($B_4T_3$) is a unique ferroelectric material that has a relatively high dielectric constant, high Curie temperature, high breakdown strength, and large spontaneous polarization. As a result this material has been widely studied for many applications, including nonvolatile ferroelectric random memories, microelectronic mechanical systems, and nonlinear-optical devices. Several reports have appeared on the use of Mn dopants to improve the electrical properties of $B_4T_3$ thin films. Mn ions have frequently been used for this purpose in thin films and multilayer capacitors in situations where intrinsic oxygen vacancies are the major defects. However, no systematic study of the optical properties of $B_4T_3$ films has appeared to date. Here, we report optical data for these films, determined by spectroscopic ellipsometry (SE). We also report the effects of thermal annealing and Mn doping on the optical properties. The SE data were analyzed using a multilayer model that is consistent with the original sample structure, specifically surface roughness/$B_4T_3$ film/Pt/Ti/$SiO_2$/c-Si). The data are well described by the Tauc-Lorentz dispersion function, which can therefore be used to model the optical properties of these materials. Parameters for reconstructing the dielectric functions of these films are also reported. The SE data show that thermal annealing crystallizes $B_4T_3$ films, as confirmed by the appearance of $B_4T_3$ peaks in X-ray diffraction patterns. The bandgap of $B_4T_3$ red-shifts with increasing Mn concentration. We interpret this as evidence of the existence deep levels generated by the Mn transition-metal d states. These results will be useful in a number of contexts, including more detailed studies of the optical properties of these materials for engineering high-speed devices.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.12
• /
• pp.53-58
• /
• 2015

Engineers should take great care of characterizing the engineering properties of mudrock, because the uncemented mudrock can be considered as a hard rock in appearance. Therefore, the mudrock samples obtained from the cut slope in Gyeongki-do were tested to evaluate the strength characteristics of uncemented mudrock in this study. The performed tests are index properties, slake durability, and swelling tests for the classification of the mudrock for engineering practice. To evaluate the effect of water on the engineering properties of the uncemented mudrock, resonant column, triaxial compression and direct shear tests with various water contents were performed. With the increasing water contents, stiffness at very small to small strain region and the cohesion value of the strength parameters decrease. Based on the test results, engineers should take great care of evaluating the engineering properties of uncemented mudrock.

• Journal of the Korean Home Economics Association
• /
• v.37 no.7
• /
• pp.29-43
• /
• 1999

The purpose of this study was to develop disposable diapers for the elderly in need by experimenting with wearing disposable diapers and analyzing the properties of materials of these diapers. The diapers were of two different types: one was a panty type for the elderly who were bed ridden, and the other was a pad type for the elderly who had incontinence. The subjects for the wearing test of the panty type were forty who were bed ridden, and there were forty subjects for the wearing test of the pad type who had incontinence. The disposable diapers for these experiments were chosen from those already found in the market place. Four panty types and three pad types were selected. From these experiments for the disposable diapers, the first prototypes were developed, and the second prototypes were proposed by experimenting with the first prototypes. The first panty prototype was designed to improve absorbing power, and we added waist rubber bands to prevent evacuation from back leaking and a frontal tape to prevent waistline film from tearing. The first pad prototype was designed to improve absorbing power also, and we added side rubber bands to prevent the side leaking and an adhesive tape on the fore part of the bottom to prevent the diapers from moving, and made the outline of the back area curved and thin to help hide the diaper from detection thus making the wearer feel better. From these test cases and analyzing the properties of materials with the first prototypes, we gained some success, but several points on further improvements were proposed to refine the final prototypes. The second panty prototype we proposed was to make 1he length longer, especially in the crotch area to prevent excess leaking and to fit the body more snugly. Also, the second pad prototype was proposed to reduce the total thickness of the diaper, and to improve the feeling and appearance.