• Textile Coloration and Finishing
• /
• v.22 no.1
• /
• pp.28-36
• /
• 2010

The deep black coloration of polyester fabrics was obtained by the physical properties of color and color mixing system. In this experiment, we have measured the absorbance and the reflectance of various disperse dyes for accomplishing the lowest lightness value and uniform reflectance, and new matching algorithm and computer color matching was made. The matching used both isomeric and metameric matching. The color matching of deep black color represented low lightness. Though actual reflectance of dyed polyester fabrics using these matching results was as high as theoretical one, low lightness value($L^*$) and uniform appearance were achieved.

• Journal of Fashion Business
• /
• v.11 no.6
• /
• pp.115-124
• /
• 2007

The cross-section of the polyester filament yarn has been modified to have a variety of shape for aesthetic, added functions and sensitivities, and other purposes. Transparent polyester filament of trilobal cross-section has unique optical properties with high anisotropic reflectivity and transmissivity. The monofilament yarns may be utilized to impart to the fabrics lustrous appearance along with unique color change in case differently dyed yarns are woven together. The color changes of the fabric specimens according to the changes in observation and lighting conditions were analyzed using a CCD camera and an image analysis software. The changes of color/luster of the fabric specimens were measured and analyzed based on RGB, $L^*a^*b^*,\;L^*C^*h,$ and the color distribution within a three-dimensional color space.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.34-37
• /
• 2005

While all-aluminum front end carriers have been frequently used by major foreign auto-makers, the carriers domestically produced are typically hybrid types. It is understood that higher fuel efficiency due to weight reduction can be achieved by using aluminum carriers because of aluminum's light weight. Moreover, aluminum is expected to posess high corrosion resistance and recyling rate. As a first step to enhance feasibility of domestic production of all-aluminum carriers, several carriers made by advanced auto makers are examined and compared. Besides basic characteristics such as appearance and weight, physical properties including composition, strength and elongation are carefully analyzed to obtain critical design and process factors.

• Journal of Welding and Joining
• /
• v.17 no.6
• /
• pp.32-37
• /
• 1999

Since stainless steel plates have good mechanical properties, weldability, appearance and resistance of corrosion, these are traditionally used for vehicles such as the bus and the train. And they are mainly fabricated by spot welding. But fatigue strength of their spot welded joint is considerably influenced by welding conditions as well as geometrical factors. Thus a reasonable and systematic criterion for long life design of spot welded body structure must be established. In this report, strain energy density was analyzed by using 3-dimensional finite element model about the IB-type spot welded lap joint under tension-shear load. Fatigue tests were conducted on them having various thickness, joint angle, lapped length and width. From their results, it was found that fatigue strength of the IB-type spot welded lap joints could be effectively and systematically rearranged by strain energy density at the edge of nugget.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.5
• /
• pp.27-35
• /
• 2008

In order to determine the most appropriate recycling line to treat old corrugated container (OCC) to substitute unbleached kraft pulp (UKP) for the manufacture of kraft paper, three recycling lines were evaluated in pilot scale tests. The recycling line consisting of kneading, flotation, washing, dispersion and screening steps was able to produce pulp with acceptable appearance. Kneading was shown to be more efficient treatment to reduce specks than dispersion. In addition, 0.2 mm slot screen was very effective to remove specks. Severe damages on fiber morphology such as shortening of fiber and formation of fines were not observed during mechanical treatments such as kneading and dispersion. Most of strength properties of the kraft paper produced with the recycled pulp were found to be slightly increased after treated in the recycling lines.

• Journal of Powder Materials
• /
• v.1 no.2
• /
• pp.145-152
• /
• 1994

Atomizing mode and powder characteristics of CuA1Ni base shape memory alloy in rotating disk atomization were investigated in accordance with disk materials and additional elements. Produced powders were classified into two types of spherical and flake shape. In the case of CuAlNiBTi and CuAlNiZr alloy, high yield rate and fine powder were obtained. This tendency was same when we used oxide coated disks. We concluded that this results were steno from the wetting characteristics change between molten metal and disk surface. Especially, due to the reactive properties of Ti and Zr with ceramic disk, the change of atomizing appearance and powder characteristics were noticeable.

• Food Science and Biotechnology
• /
• v.16 no.6
• /
• pp.924-927
• /
• 2007

This study addresses the quality characteristics of commercial baechukimchi by analyzing its physicochemical characteristics and sensory properties in relation to fermentation time and temperature. The salinity of baechukimchi increased to 3.01% after 45 days of fermentation at 2 and $5^{\circ}C$, but decreased to 2.81% by 105 days. The pH decreased gradually at the beginning of fermentation, but decreased after 45 days. The acidity differed most between kimchi fermented at $2^{\circ}C$ (0.36%) and $5^{\circ}C$ (0.48%) at 45 days of fermentation. The vitamin C content was 8.47 mg% in kimchi fermented at both 2 and $5^{\circ}C$ on the day of initial production, then peaked after 45 to 60 days at 14.10 mg%, and decreased thereafter. The total microbial count gradually increased during the first 75 days of fermentation. The appearance and overall acceptability of baechukimchi were highest after 90 days of fermentation at $2^{\circ}C$ and after 60 days of fermentation at $5^{\circ}C$.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.22 no.3
• /
• pp.243-250
• /
• 2006

Due to high esthetic demands from patients, we are driven to fabricate natural-looking(form and color) restorations. In the past decade, the glass-ceramic in dentistry has been used as a material with variable crystals that affects the appearance, characteristics, and mechanical properties of metal-free fixed restoration. The conventional IPS Empress glass-ceramic is a heat-pressed, leucite reinforced material using the "lost wax" principle. This glass-ceramic has been successfully used for esthetic restorations such as all-ceramic crowns, inlays/onlays, and veneers for about 15 years. This article presents that the form and surface texture of clinical crown are duplicated by IPS-Empress system using "lost-wax technique".

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.73.1-73.1
• /
• 2011

An understanding of the ultraviolet (UV) properties of nearby galaxies is essential for interpreting images of high redshift systems. In this respect, the prediction of optical-band morphologies at high redshifts requires UV images of local galaxies with various morphologies. We present the simulated optical images of galaxies at high redshifts using diverse and high-quality UV images of nearby galaxies obtained through the Galaxy Evolution Explorer (GALEX). We measured CAS (concentration, asymmetry, clumpiness) as well as Gini/M20 parameters of galaxies at near-ultraviolet (NUV) and simulated optical images to quantify effects of redshift on the appearance of distant stellar systems. We also discuss the change of morphological parameters with redshift.

• Journal of Information Display
• /
• v.8 no.1
• /
• pp.14-17
• /
• 2007

The toner type paper-like display (PLD) has been developed with two polymer particles having opposite polarity composed of polymer, colorant and external additives (nano-sized silica). Nano-sized silica with triboelectric charge was used for the charge control agent (CCA) and influenced on the electrostatic properties of the silica-coated polymer particles. The surface morphology and the cohesiveness of silica-coated polymer particles were changed with the silica coating time. From these results, it was verified that the PLD cell using silica-coated particles (200 seconds) shows a good white appearance and low driving voltage.