• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1158-1161
• /
• 2006

The toner type paper-like display (PLD) has been developed with two polymer particles having opposite polarity which is composed of polymer, colorant and external additives (nano-sized silica). Nano-sized silica with triboelectric charge was used for the charge control agent (CCA) and influenced on the electrostatic properties of the silica-coated polymer particles. The PLD cell using silica-coated particles (200 seconds) had shown a good white appearance and low driving voltage. The result could be explained in terms of the surface morphology and the cohesiveness depending on the silica coating time.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1993년도 가을 학술발표회 논문집
• /
• pp.65-70
• /
• 1993

The effect of particle size of Al powder, water repellent agent and finishing agent on frost resistance, absorption ratio and structure of micropore was examined to improve the physical properties and durability of ALC. According as the amount added of water repellent agent was increased, frost resistance was improved and absorption ratio was decreased. From one side freezing /thaw test, finishing agent which has a low vapor permeation located the crack at close indoor point of ALC specimen. ALC produced from fine Al powder has a low volume reduction by scalling and a sound appearance after freezing/thawing test and top surface freezing test, The crystal of tobermorite in ALC matrix was converted to calcium carbonate by carbonation which was accelerated with the decreasing of water content. Since the micropore of ALC was filled up by calcium carbonate, void ratio was reduced and crack was detected after complete carbonation.

• 천문학논총
• /
• 제7권1호
• /
• pp.51-61
• /
• 1992

The nonlinear stochastic behavior of chaotic inflation is characterized by the 'scaling' effect. Using a simple criterion for the appearance of scaling behavior in the ${\lambda}{\phi}^4$ inflation model, we show explicitly that in this limit the onset of the scaling regime does not require any special initial conditions and that it is independent of the self-coupling constant ${\lambda}$. Non-Gaussian statistics in adiabatic fluctuations are important only for super-horizon scales and the scaling regime does not lead to any significant statistical properties on currently observable scales. However, the scaling effect gives some cosmological consequences very different from what we expect in the naive diffusion approximation for quantum fluctuations. The classical (deterministic) treatment of the inflation field (essentially a quantum mechanical object.) becomes valid towards the end of inflation.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2011년도 전기공동학술대회 논문집
• /
• pp.13-14
• /
• 2011

Methane Hydrates or Natural Gas Hydrates (hereinafter NGH) are solid-state energy source formed by the clathration of methane gas in water molecules at low temperature and high pressure. NGH is also known as "burning ice" because of its burning property and appearance similar to that of dry ice. Today, concerns about the NGH are rising as an environment-friendly energy source that can replace fossil fuels. In this paper, to keep pace with the research and development of the NGH, the properties of the NGH and the general features of NGH carriers are introduced.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.71-76
• /
• 2003

This paper describes the characteristic of a large-diameter pipe to obtain smooth surface using Electropolishing after grinding using a non-woven fabric. Grinding using a non-woven fabric is possible under lower load and fine effect comparing with Wheel grinding. Also, the ion from the surface of the metal is eliminated by means of an electrical potential and current in Electropolishing. Electropolishing is used for leveling the surface, improving the physical appearance of the part, promoting corrosion properties and reducing contamination and adhesion of the surface. Therefore, the aim of the present study is to investigate the internal machining of a large-diameter pipe for semiconductor using experimental design method.

• 한국의류산업학회지
• /
• 제8권5호
• /
• pp.591-596
• /
• 2006

In order to analyze the tailorbility of different fabrics for men's suit, FAST system has been used for measuring the distribution of mechanical properties in this study. As results, cashmere mixed woolen fabrics showed the minimum degree in relaxation shrinkage, formability, and shear rigidity than any other fabrics, and also showed more than 6% as maximum level of extensibility. Thus, cashmere mixed woolen fabrics requires careful tailoring in lay-out, marking, and cutting. It is necessary to establish new tailoring criteria for automatic sewing with cashmere mixed woolen fabrics than any other fabrics, because they show more failure rate of tailorbility. There have been noticeably more variation of shrinkage and extension for woolen fabrics with cashmere mixed than 100% woolen fabrics by evaluating the formability of the suits when these are completed to suits through cutting and tailoring from fabrics. Especially nylon mixed woolen fabrics showed shrinkage overall, but polyester mixed woolen fabrics showed extension at waist area. Thus, it is necessary to adjust the appropriate overfeed rate considering the amount of shrinkage and extension while tailoring.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.943-946
• /
• 1997

Electropolishing is the controlled electrochemical removal of surface metal, resultmg in a brilliant appearance andimproved properties. Sometimes described as "reverse plating," the process has a leveling effect, which produces smoothnessand increased reflectivity. Unlike conventional mechanical finishing systems, the electropolishing does not smear, bend,stress or fracture the crystalline metal surface to achieve smoothness. Instead, electropolishing removes metal from thesurface producing a unidirectional pattern that is stress-free, microscopically smooth and often highly reflective. In addition,improved corrosion resistance and passivity are achieved on many ferrous and some non-ferrous alloys. Pure aluminium doesnot electropolish well, if at all, but most other alloys of aluminum electropolish excellently.Therefore, the aim of this study is to determine the characteristics of electropolishing aluminium alloy in term of currentdensity, machining time, temperature, electrode gap and workpiece surface measurementkpiece surface measurement

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권4호
• /
• pp.517-523
• /
• 2009

Magnesium alloys have many advantages such as a low density, high strength/weight ratio and well recycle. And joining process is absolutely necessary to expand the field of application of magnesium alloy. The main problems of conventional process such as arc welding for magnesium alloy are the inflammability, a tendency toward crack formation and the appearance of porosity during solidification. Laser welding technology is a promising means for overcoming these difficulties. This study is related to the laser weldability of AZ31 magnesium alloy, an all-purpose wrought alloy with good strength and ductility. The effect of welding conditions on the weldability of butt joints was examined. Also, the mechanical properties of butt welded joints were investigated by tensile test and hardness test.

• 한국식품조리과학회지
• /
• 제29권3호
• /
• pp.283-289
• /
• 2013

We manufactured the sausages replaced part (8%) of the pork fat (20.8%) with pepper seed powder (1%) and pepper seed oil (7%). The treatment of pepper seed did not affect pH and microbial quality, but decreased TBARS and VBN of sausages. Although the addition of pepper seed hardly changed textural properties of sausages except for increasing cohesiveness, it enhanced sensory characteristics such as taste, appearance, and overall acceptability. As expected, significant reductions were observed in the content of calorie, total fat, saturated fat, and sodium by replacing pork fat with pepper seed oil and pepper seed powder in sausages. Therefore, pepper seed is good enough to improve the sensory and nutritional quality of sausages.

• 한국식품조리과학회지
• /
• 제3권2호
• /
• pp.38-49
• /
• 1987

This study was designed for the standard formulation of SULNONGTANG cooking method, I have performed a sensory evaluation and physical properties of conventional SULNONGTANG and Market SULNONGTANG. The results were as follows : 1. In case of conventional method, in term of the addition of ingredients, to maintain optimal nutrition and to achieve good appearance and taste from sliced meat (Pyoun Yuk) of the beef's head, brisket, tongue ana breast, the followings are recommended cooking methods 1) For beef's leg bones, lead, knee bones and tripe, it is reasonable to addition from the beginning and to boil them for 12~18 hours. 2) Sliced meat from the head should be prepared after 4 hours boiling. 3) Brisket, tongue and breast should be added 2 hours before cooking is finished. 2. In Market SULNONGTANG, taste was poorer than that of conventional SULNONGTANG. When the head is added to Market SULNONGTANG, taste was more desirable than those added hooves or knee bones.