• 한국잠사곤충학회지
• /
• 제18권2호
• /
• pp.61-64
• /
• 1976

1. 발생소장은 기상환경 중 강우량 및 일조시수에 큰 영향을 받으며 8월초 밀도가 급증하여 하순에 Peak를 나타내었다. 2. 엽위별분포는 상부로부터 4-16엽이 분포하고 그 중 6-12위엽에 최대로 분포하였다. 3. Orthene, Metasystox의 방제효과가 우수하였다.

• 치과방사선
• /
• 제10권1호
• /
• pp.29-33
• /
• 1980

An ameloblastoma produces more extensive resorption of the teeth on which it encroaches than do most of the other lesions. In this study, intraoral and extraoral radiographs of 78 cases of ameloblastoma were observed and the root resorption associated with ameloblastoma was classified into four types of resorption. With these, the following conclusions were obtained. 1. The root resorption was observed in 72 cases of ameloblastoma. (92.3%) 2. In the aspect of resorptive changes of 424 roots observed, 342 roots showed smooth resorption. (80.6%) 3. The 424 roots associated with ameloblastoma revealed the following radiographic features. a) Root apex resorption in contact with the lesion appeared in 189 roots. (44.5%) b) The resorption of roots projected into the lesion appeared in 147 roots. (34.6%) c) Slight resorption of root surface in contact with the lesion was observed in 56 roots. (13.2%) d) Loss of lamina dura and periodontal space without root resorption were observed in 32 roots. (7.7%)

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.49-50
• /
• 2000

5.2" microtip field emission displays (FEDs) with high voltage applications are fabricated. Nano-structural analysis on microtips is performed for the reliable operation of FEDs. Chemical compositions on the apex of microtips are fully analyzed. A charging mechanism on spacers is simulated and experimentally confirmed with micro-images. A gas-aging mechanism is also studied with integration step of FEDs. The brightness of more than 300 $cd/m^2$ is achieved. In addition, as a new concept, 9" color carbon nanotube FEDs (CNT-FEDs) are introduced using well-aligned carbon nanotubes on glass substrates by paste squeeze and surface treatment techniques. A number of carbon nanotubes, $5-10/{\mu}m2$, are uniformly distributed over a large area. The turn-on fields of 1 $V/{\mu}m$ and field emission currents of 1.5 mA at 3 $V/{\mu}m$ are acquired. Different mechanisms between microtip FEDs and CNT-FEDs are discussed.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2003년도 제120회 추계학술대회 제 5차 한ㆍ일 치과보존학회 공동학술대회
• /
• pp.586-586
• /
• 2003

In the infected immature tooth with periapical involvement, the pulp is considered to hardly exist in the canal and periapical area. Such a tooth receives apexification procedure, because revascularization of the pulp chamber is in principle not expected. Apexification is beneficial to induce further development of an apex to close the foramina, but does not promote the thickness of the entire canal wall dentin. It may be possible for the pulp to be only partially necrotic and infected when an extremely large communication from the pulp space to the periapical tissues exists with a very young tooth. If this were the case, vital pulp in the apical part of the canal could proliferate new pulp into the coronal pulp space by the successful removal and disinfection of the necrotic infected coronal pulp.(omitted)

• 식물분류학회지
• /
• 제34권3호
• /
• pp.265-271
• /
• 2004

현호색과 현호색속 현호색절의 1신종인 남도현호색이 한국의 중부 및 남부 지방에서 발견되어 기재되었다. 신종은 매우 다양한 엽형과 넓고 편평한 방추형 열매를 가짐으로써, 또한 삭과 내에 종자가 거의 2열로 배열하고, 내화판의 정단이 V자 모양으로 함몰하며, 다소 제한된 분포역을 가짐으로써, 이와 유사한 흰현호색과 뚜렷이 구별되었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.535-540
• /
• 2000

The objective of the present study is to visualize the pulsatile flow fields by using three-dimensional computer simulation and the PIV system. A closed flow loop system was built for the steady and unsteady experiments. The Harvard pulsatile pump was used to generate the pulsatile pressure and velocity waveforms. Conifer powder as the tracing particles was added to water to visualize the flow field. Two consecutive particle images were captured by a CCD camera for the image processing. The cross-correlation method in combination with the moving searching area algorithm was applied for the image processing of the flow visualization. The pulsatile flow fields were visualized effectively by the PIV system in conjunction with the applied algorithm. The range validation and the area interpolation methods were used to obtain the final velocity vectors with high accuracy. The finite volume predictions were used to analyze three-dimensional flow patterns in the bifurcation model. The results of the PIV experiment and the computer simulation are in good agreement and the results show the recirculation zones and formation of the paired secondary flow distal to the apex of the bifurcated model. The results also show that the branch flow is pushed strongly to the inner wall due to the inertial force effect and helical motions are generated as the flow proceeds toward the outer wall.

• Geomechanics and Engineering
• /
• 제2권3호
• /
• pp.177-190
• /
• 2010

This paper presents the details of indigenous development of the piezovibrocone and calibration chamber. The developed cone has a cylindrical friction sleeve of $150cm^2$ surface area, capped with a $60^{\circ}$ apex angle conical tip of $15cm^2$ cross sectional area. It has a hydraulic shaker, coupled to the cone penetrometer with a linear displacement unit. The hydraulic shaker can produce cyclic load in different types of wave forms (sine, Hover sine, triangular, rectangular and external wave) at a range of frequency 1-10 Hz with maximum amplitude of 10 cm. The piezovibrocone can be driven at the standard rate of 2 cm/sec using a loading unit of 10 ton capacity. The calibration chamber is of size $2m{\times}2m{\times}2m$. The sides of the chamber and the top as well as the bottom portions are rigid. It has a provision to apply confining pressure (to a maximum value of $4kg/cm^2$) through the flexible rubber membrane inlined with the side walls of the calibration chamber. The preliminary static as well as dynamic cone penetration tests have been done sand in the calibration chamber. From the experimental results, an attempt has been made to classify the soil based on friction ratio ($f_R$) and the cone tip resistance ($q_c$).

• Restorative Dentistry and Endodontics
• /
• 제46권4호
• /
• pp.56.1-56.11
• /
• 2021

Objectives: This study evaluated 2 nickel-titanium rotary systems and a complementary protocol with an ultrasonic tip and a small-diameter instrument in flattened root canals. Materials and Methods: Thirty-two human maxillary second premolars with flattened canals (buccolingual diameter ≥4 times larger than the mesiodistal diameter) at 9 mm from the radiographic apex were selected. The root canals were prepared by ProDesign Logic (PDL) 30/0.01 and 30/0.05 or Hyflex EDM (HEDM) 10/0.05 and 25/0.08 (n = 16), followed by application of the Flatsonic ultrasonic tip in the cervical and middle thirds and a PDL 25/0.03 file in the apical third (FPDL). The teeth were scanned using micro-computed tomography before and after the procedures. The percentage of volume increase, debris, and uninstrumented surface area were analyzed using the Kruskal-Wallis, Dunn, Wilcoxon, analysis of variance/Tukey, and paired and unpaired t-tests (α = 0.05). Results: No significant difference was found in the volume increase and uninstrumented surface area between PDL and HEDM (p > 0.05). PDL had a higher percentage of debris than HEDM in the middle and apical thirds (p < 0.05). The FPDL protocol resulted in less debris and uninstrumented surface area for PDL and HEDM (p < 0.05). This protocol, with HEDM, reduced debris in the middle and apical thirds and uninstrumented surface area in the apical third (p < 0.05). Conclusions: High percentages of debris and uninstrumented surface area were observed after preparation of flattened root canals. The HEDM, Flatsonic tip, and 25/0.03 instrument protocol enhanced cleaning in flattened root canals.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1995년도 춘계학술대회
• /
• pp.95-100
• /
• 1995

This study investigated the effects of mechanical factors involved in several corneal refractive surgeries on the surgical outcomes. Then we proposed possible new techniques from the mechanical point of a view utilizing finite element method. The models studied are: circumferential keratetomy, combination of excimer laser photorefractive keratectomy and circumferential keratotomy for myopia treatment, arcuate keratotomy for astigmatism treatment. The cornea was assumed to be nonlinear elastic and almost incompressible material as the most soft tissue in the human body. In the circumferential keratotomy the effect of the incision location was investigated. The angle and location of the incision were varied to predict the surgical outcomes in the arcuate keratotomy. The finite element analysis results showed that the location of incision was a critical factor affecting the surgical outcomes in the circumferential keratotomy. In the combination of the excimer laser photorefractive keratectomy and circumferential keratotomy, it was predicted that the circumferential can increase or decrease the refractive power depending on the incision location or it can be used to adjust the overcorrection of undercorrection. In the arcuate keratotomy for astigmatism, the most diopter changes were predicted when the location and the angle of the incision were 3.0mm from the apex and $90^{\circ}$, respectively. In the arcuate keratotomy, the effects of an incision were studied within the incision area as well as outside the incision area. Also, the arcuate keratotomy with two incisions located on the opposite area of the cornea was also studied. As a conclusion, the finite element method is a useful technique in the area of corneal refractive surgeries to develop new techinques.

• 한국동물학회지
• /
• 제8권1호
• /
• pp.11-14
• /
• 1965

The object to this study is to identify the genus and species of the microfilariae which were recently found in the area of Youngju-Gun. THe identification of the microfilariae was made on the morphologicla aspects. 1. Blood samples were collected through vena punction from known microfilariae carriers living in the newly confirmed filaria endemic area of Youngju0Gun in Jyongsang Pukdo Province. Youngju-Gun is located in the mountainous central part of Korean Peninsula. 2. The following fixation and staining techniques were applied. (1) Fixation by drying in the air, followed by staining with Azeo or Giemsa. (2) Knott's fixation method (2% formalin), followed by staining with Azur II. 3. A comparative study of the body length of the microfilariae after different fixation and staining techniques were applied. (1) Knott's fixation method followed by staining with Azur II : average body length found was 28.4$\mu$. (2) Dry fixation followed by staining with Giemsa : average body length found was 209.4$\mu$. (3) Dry fixation followed by staining with Azeo : average body length found was 205.4$\mu$. 4. The locations of the different body cells were measured in 60 individuals of microfilariae in the wet preparation fixed by Knott's method and stained with Azur II. The distance of the different body cells to cephalic apex of microfilariae was measured and calculated as a percentage of the total body length. The average results are as follows : BNC , 3.04% ; N, 22.74%, EP, 31.4% ; EC, 37.77%, G1 cell , 67.94%; G2 cell, 73.54% : G3 cell , 75.55% ; G4 cell, 77.65% ; AP, 82.02%%. 5. As a result of the above findings the microfilariae found in the above mentioned area could be identified as Brugia malai(BRUG, 1927) BUCKLEY, 1960.