• Steel and Composite Structures
• /
• v.17 no.6
• /
• pp.891-906
• /
• 2014

This study aims to present a three dimensional finite element model to investigate the wave propagation in a concrete filled steel tubular column (CFSC) due to transient impact load. Both the concrete and steel are regarded as linear elastic material. The impact load is simulated by a semi sinusoidal impulse. Besides the CFSC models, a concrete column (CC) model is established for comparing under the same loading condition. The propagation characteristics of the transient waves in CFSC are analyzed in detail. The results show that at the intial stage of the wave propagation, the velocity waves in CFSC are almost the same as those in CC before they arrive at the steel tube. When the waves reach the column side, the velocity responses of CFSC are different from those of CC and the difference is more and more obvious as the waves travel down along the column shaft. The travel distance of the wave front in CFSC is farther than that in CC at the same time. For different wave speeds in steel and concrete material, the wave front in CFSC presents an arch shape, the apex of which locates at the center of the column. Differently, the wave front in CC presents a plane surface. Three dimensional effects on top of CFSC are obvious, therefore, the peak value and arrival time of incident wave crests have great difference at different locations in the radial direction. High-frequency waves on the waveforms are observed. The time difference between incident and reflected wave peaks decreases significantly with r/R when r/R < 0.6, however, it almost keeps constant when $r/R{\geq}0.6$. The time duration between incident and reflected waves calculated by 3D FEM is approximately equal to that calculated by 1D wave theory when r/R is about 2/3.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.1
• /
• pp.51-62
• /
• 2006

Purpose: The purpose of this study was to evaluate the pattern and the magnitude of stress distribution in the supporting tissues surrounding three different types of implants(ITI, 3i. and Bicon implant system) Material and method: Photoelastic models were made with PL-2 resin(Measurements Group, Raleigh, USA) and three implants of each kind were placed in the mandibular posterior edentulous area distal to the canine. For non-splinted restorations, individual crowns were fabricated on three titanium abutments. For splinted restorations, 3-unit axed partial dentures were fabricated. Photoelastic stress analyses were carried out to measure the fringe order around the implant supporting structure under simulated loaded conditions(15 lb. 30 lb). Conclusion: The results were as follows; 1 Regardless of the implant design, stresses were increased in the apex region of loaded implant when non-splinted restorations were loaded. While relatively even stress distribution occurred with splinted restorations. Splinting was effective in the second implant. 2. Strain around Bicon implant were lower than those of other implants, which confirmed the splinting effect. The higher the load, the more the stress occurred in supporting tissue, which was most obvious in the Bicon system. 3. Stress distribution in the supporting tissue was favorable in the ITI system. while the other side of 3i system tended to concentrate the stress in some parts.

• Journal of Chest Surgery
• /
• v.29 no.12
• /
• pp.1381-1384
• /
• 1996

Thymoma Is an anterior mediastinal tumor, arising from the thymus, but occasionally has ectopic focus such as neck, trachea, thyroid, pulmonary hilum, lung parenchyme and pleura. Forty-two year old male patient was admitted due to progressive development of shortness of breath in 4 months. He had a history of exposure to asbestos for About 10 years duration In recent 15 years. Radiologically, multiple pleural masses were seen rom apex to diaphrAgm, with no evidence of anterior mediastinal mass,with fluid in right pleural cavity. Closed thoracotomy drainage with open biopsy were performed. Effusion cell block showed many T cell marker positive Lymphocytes & some epithelial cells compatible with thymoma, and the tissue also showed cortical type thymoma. Pleuropneumonectomy and thymectomy followed by 60 Gy radiation therapy were done and the patient is well 8 months postoperatively. The pleura is markedly thickened by the invasion of thymoma and the interstitial space of the lung tissue,but the normal appearance of thymus was present in remote area (Masaoka classification IVa). We report a case of ectopic invasive thymoma arising from the right pleura with intact thymus.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.12 no.1
• /
• pp.21-28
• /
• 2006

Peroxidase activity was measured in brown leaf spot pathogen (Myrothecium roridum) inoculated potted mulberry (Morus alba) during pre-symptomatic to various symptom development stages and compared with corresponding healthy leaf tissues. The enzyme showed a pH optimum of 7.0 and the activity was linearly increased up to 15 min of incubation. The peroxidase had a broad substrate specificity and the rates of oxidation were in the rank of pyrogallol> guaiacol> ascorbate at pH 7.0. Catechol at 10 mM inhibited 89% of guaiacol-peroxidase and 76% pyrogallol-peroxidase activities, indicated higher non-specific peroxidation in pyrogallol dependent assay system in mulberry than guaiacol. The optimum requirement for the guaiacol dependent assay was 0.2 ml (${\approx}40-60{\mu}g$ equivalent of protein) of crude enzyme source. Excepting the 8th leaf from the apex, the peroxidase activity did not vary appreciably in different leaf positions. In pre-symptomatic phases, an initial (1 to 5 min) rise of peroxidase activity was noticed in inoculated leaves, and then maintained a plateau up to 300 min. In contrary, non-infected tissue showed a slightly increased trend of enzyme level up to 420 min. In infected tissue, a sharp transient increase (3.1 fold) of peroxidase activity appeared between 300 - 420 min post infections. Afterwards, significantly different but steady maintenance of enzyme levels were observed in two treatments. On the other hand, during symptom development, a sharp increase in peroxidase activity was noticed up to 4th grade of lesion appearance (25.1 % to 50% of leaf area infection), and then declined slightly. However, in non-infected but same age healthy leaves, such huge fluctuations of enzyme level did not apparent. A high positive correlation $(R^2=0.92)$ between peroxidase activity and leaf spot development grades was also marked. The result implies that pre-symptomatic burst (between 1 - 5 and 300 - 420 min) and subsequent increased trend of guaiacol peroxidase activity may require for the symptomatic manifestation of Myrothecium leaf spot in mulberry.

• Restorative Dentistry and Endodontics
• /
• v.25 no.2
• /
• pp.202-211
• /
• 2000

The aim of this study was to compare the apical sealing ability of a new thermoplasticized gutta-percha filling technique, the Easy Filling and the Quick Obturation system with lateral condensation technique and Thermafil system to evaluate their clinical acceptabilities. Fifty-two extracted single-rooted teeth were instrumented to #35 using the .04 taper ProFile system. Four groups of 12 teeth were obturated by lateral condensation technique. Thermafil system and two new thermoplasticized gutta-percha techniques, the Easy Filling system and Quick Obturation system (Meta Dental co. Ltd. Korea), respectively. Four teeth served as controls. After the teeth were immersed in 2% methylene blue dye for 48 hours, they were resected horizontally at 1mm to 5mm level from the anatomical apex using a low-speed microtome. Each section was examined under a stereomicroscope at ${\times40}$ magnification and photographed. After each image was scanned, the leakage area was measured at each level using Brain 3 (Nosdia Tech., Korea) software. Leakage ratio was calculated for each group and was analyzed statistically to come up with the following results: 1. At 1mm level, the Quick Obturation system had the largest amount of apical leakage and it was statistically significant when compared with the lateral condensation group and the Thermafil group (p<0.05). 2. At 2mm and 3mm level, there were no significant difference of apical leakage among all four groups (p>0.05), and from 4mm level, no apical dye penetration was observed in all the groups. In conclusion, the apical seal produced by Easy Filling system and the Quick Obturation system was comparable to lateral condensation technique and Thermafil system except for the 1mm level. More improvement of the apical seal can be expected as the operator becomes skillful with the new techniques.

• Restorative Dentistry and Endodontics
• /
• v.38 no.3
• /
• pp.154-159
• /
• 2013

Objectives: The aim of this study was to compare the cleaning efficacy of different final irrigation regimens in canal and isthmus of mandibular molars, and to evaluate the influence of related variables on cleaning efficacy of the irrigation systems. Materials and Methods: Mesial root canals from 60 mandibular molars were prepared and divided into 4 experimental groups according to the final irrigation technique: Group C, syringe irrigation; Group U, ultrasonics activation; Group SC, VPro StreamClean irrigation; Group EV, EndoVac irrigation. Cross-sections at 1, 3 and 5 mm levels from the apex were examined to calculate remaining debris area in the canal and isthmus spaces. Statistical analysis was completed by using Kruskal-Wallis test and Mann-Whitney U test for comparison among groups, and multivariate linear analysis to identify the significant variables (regular replenishment of irrigant, vapor lock management, and ultrasonic activation of irrigant) affecting the cleaning efficacy of the experimental groups. Results: Group SC and EV showed significantly higher canal cleanliness values than group C and U at 1 mm level (p < 0.05), and higher isthmus cleanliness values than group U at 3 mm and all levels of group C (p < 0.05). Multivariate linear regression analysis demonstrated that all variables had independent positive correlation at 1 mm level of canal and at all levels of isthmus with statistical significances. Conclusions: Both VPro StreamClean and EndoVac system showed favorable result as final irrigation regimens for cleaning debris in the complicated root canal system having curved canal and/or isthmus. The debridement of the isthmi significantly depends on the variables rather than the canals.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.4
• /
• pp.209-220
• /
• 2019

Even though the scale of hard structures for beach stabilization should carefully be determined such that these structures do not interrupt the great yearly circulation process of beach sediment in which the self-healing ability of natural beach takes places, massive hard structures such as the submerged breakwater of wide-width are frequently deployed as the beach stabilization measures. On this rationale, asymmetric ripple mat by Irie et al. (1994) can be the alternatives for beach stabilization due to its small scale to replace the preferred submerged breaker of wide-width. The effectiveness of asymmetric ripple mat is determined by how effectively the vortices enforced at the contraction part of flow area over the mat traps the sediment moving toward the offshore by the run-down. In order to verify this hypothesis, we carry out the numerical simulations based on the Navier-Stokes equation and the physically-based morphology model. Numerical results show that the asymmetric ripple mat effectively capture the sediment by forced vortex enforced at the apex of asymmetric ripple mat, and bring these trapped sediments back to the beach, which has been regarded to be the driving mechanism of beach stabilization effect of asymmetric ripple mat.

• Journal of the Korean Burn Society
• /
• v.23 no.1
• /
• pp.25-29
• /
• 2020

This paper presents our clinical experiences for reconstruction of the linear depressed postburn scar band by rhombus subcutaneous pedicle skin flap (RSPF). We report new RSPF, it's versatility, and effectiveness for correction of the mild to moderate linear depressed postburn scar band. To correct the postburn scar band, we have newly designed the Rhombus Subcutaneous Pedicle Skin Flap (RSPF), which is made as rhombus-shaped skin flap on the inside of scar band. After excision of burn scar band, the each vertex of RSPF flap is advanced into the skin defects at apex of extended skin incision, which is starting from the upper and lower portion of the removed burn scar band at a near right angle. This flap can add more extra skin to adjacent superior and inferior area of excised scar band. We have experienced 2 cases of RSPF for reconstruction of linear depressed postburn scar band deformities in lower extremity. After 3 weeks to 3 months postoperative follow ups, relatively satisfactory results were obtained in all cases. We had successfully reconstructed the linear depressed postburn scar postburn band of lower extremity using the rhombus subcutaneous pedicle skin flap. For the correction of mild to moderate sized linear depressed postburn scar band deformities in extremity, the RSPF is simple, and very effective without donor morbidity.

• Restorative Dentistry and Endodontics
• /
• v.47 no.2
• /
• pp.24.1-24.15
• /
• 2022

Objectives: Regenerative endodontic treatment is a clinical procedure aimed at biologically regenerating damaged root canal tissue of immature permanent teeth. This study aimed to report the outcomes of regenerative endodontic treatment performed by endodontic postgraduate students. Materials and Methods: Clinical and radiographic data of 27 patients, aged 10-22 years, who underwent regenerative treatment of immature permanent teeth from 2015 to 2019 were followed up, wherein clinical and radiographic examinations were performed for each patient. Postoperative success rate and tooth survival were analyzed, and the postoperative radiographic root area changes were quantified. Results: A total of 23 patients attended the dental appointments, showing that all teeth survived and were asymptomatic. Specifically, 7 periapical pathosis cases were completely healed, 12 were incompletely healed, and 4 cases failed. Moreover, significant differences were found between discolored and non-discolored teeth, and between the presence or absence of periapical radiolucency. Additionally, 3 anterior teeth showed complete closure of the apical foramen, while the apical foramen width was reduced in 17 teeth and failed in 3 teeth. Root length was also found to have been increased in 7 anterior and 4 posterior teeth, and the average length ranged from 4.00-0.63 mm in the anterior teeth, 2.85-1.48 mm of the mesial root, and 2.73-2.16 mm of the molar teeth distal root. Furthermore, calcified tissue deposition was observed in 7 teeth. Conclusions: A favorable outcome of regenerative endodontic treatment of immature permanent teeth with necrotic pulp was achieved with a high survival rate.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.5
• /
• pp.547-558
• /
• 2023

This research delves into the fabrication of an ultra-high-strength concrete, enriched with oxidized graphene nanoplatelet(GO) and hollow glass powder(HGP), notably eschewing the conventional inclusion of silica fume(SF). The primary objective was to scrutinize the autogenous shrinkage characteristics of this innovative formulation. It was discerned that the NewMix specimen, which incorporated the cGO(sourced from Company C) and HGP, and intentionally bypassed SF, showcased a commendable 13% reduction in autogenous shrinkage relative to the benchmark(Ref) specimenthat incorporated SF. Moreover, the proclivity for crack formation owing to autogenous shrinkage in the NewMix was observed to manifested by NewMix at the juncture of cracking emerged as the apex value. Attributed to the expansive specific surface area and exemplary dispersibility of cGO, it was postulated that the concrete's pore structure benefitted from enhanced infill, leading to a reduction in autogenous shrinkage. Additionally, the cGO integration fortified the concrete's resistance to crack initiation. Consequently, such an enhancement is posied to be pivotal in mitigating crack propagation resulting from autogenous shrinkage in ultra-high-strength concrete.