• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.810-813
• /
• 2003

Wide spread using of mobile and handy electronic apparatus is giving rise to a question on the harmfulness of health and causing troubles when electical and electronic equipments are in use. This paper reports on the experimental results obtained by using a pliable and structured specimen that has a long shape aperture, made of stainless steel fibers. Based on the TEM mode transfer structure that was designed and manufactured through HFSS, we measured electromagnetic shielding effectives, where the network analyzer was applied. We could draw a conclusion from this research that the metal fabric showed a good electromagnetic shielding effect, mainly by means of the good reflex loss at the fiber surface. Even though the material itself possesses a good absorption loss. the specimen revealed that structural factors. e.g.. the shape of the aperture. the size of the aperture, etc., can have a more influence on the shielding effect than the components of material have. A special notice is required for modeling and analyzing the electromagnetic characteristics of metal fabrics, because there exists a strong possibility that multiple reflection can happen on the surface of metal fibers. which can presume a model of fiber bundle and fabric structure.

• 한국정밀공학회지
• /
• 제23권6호
• /
• pp.160-165
• /
• 2006

We have designed a high-transmission nano aperture in a perfect electric conductor film with the incident beam of 532 nm wavelength. The aperture basically has a C-shape and is known to produce a bright spot nearby the aperture in small size less than diffraction limit. The bright spot is strongly coupled with the local plasmon excited through the aperture hole. The characteristics of transmission and peak power of the aperture output were calculated using finite differential time domain (FDTD) technique, and the geometry of the aperture was determined to get a maximum transmission and peak power. To find the effect of the surface plasmon induced near by the aperture, we calculated the variations of the transmittance and the beam sizes by changing the size of the input beam irradiated on the aperture.

• 소성∙가공
• /
• 제15권1호
• /
• pp.21-26
• /
• 2006

A optical head unit for nano optical probe array was developed. The optical probe array is generated by Talbot effect. The shape and thickness of microlens array(MLA) were designed to minimize the spot size at the foci of MLA. To increase the optical efficiency of the system and obtain the large tolerance for fabrication, aperture size was theoretically optimized. Then microlens illuminated aperture array(MLIAA) as an optical head unit was fabricated using a ultra violet(UV) molding process on aluminum aperture array. In this process, Al aperture array was fabricated separately using the photolithography and reactive ion etching(RIE) process. Optical properties of the generated optical probes were measured and compared at Talbot distance from the aperture array having a diameter of $1{\mu}m$ and MLIAA.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 금형가공,미세가공,플라스틱가공 공동 심포지엄
• /
• pp.29-34
• /
• 2005

A optical head unit for nano optical probe away was developed. The optical probe array is generated by Talbot effect. The shape and thickness of microlens array(MLA) were designed to minimize the spot size at the foci of MLA. To increase the optical efficiency of the system and obtain the large tolerance for fabrication, aperture size was theoretically optimized. Then microlens illuminated aperture array(MLIAA) as an optical head unit was fabricated using a ultra violet(UV) molding process on aluminum aperture array. In this process, Al aperture array was fabricated separately using the photolithography and reactive ion etching(RIE) process. Optical properties of the generated optical probes were measured and compared at Talbot distance from the aperture array having a diameter of $1{\mu}m$ and MLIAA.

• 한국광학회지
• /
• 제16권5호
• /
• pp.428-432
• /
• 2005

마이크로칼럼에 사용되는 전자렌즈는 MEMS 공정으로 정밀하게 가공되어 기존의 전자칼럼에 비하여 광학수차를 최소화 할 수 있으며, 이는 전자칼럼의 성능 향상에 주요한 요소로 작용한다. 따라서 반도체 공정 방식(습식식각과 건식식각)에 의해 형성되는 렌즈구조에 따른 전자 광학계 연구는 중요한 의미가 있다. 마이크로칼럼을 구성하고 있는 전자방출원, 소스렌즈, 디플렉터, 포커스렌즈(Einzel lens) 중에서 전자빔의 특성에 가장 큰 영향을 주는 것은 소스렌즈이다. 본 연구에서는 소스렌즈의 extractor와 limiting aperture의 구조에 따른 전자빔 특성을 조사하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.182-185
• /
• 2008

The thermal performance of air receiver with a change of flow direction for dish solar collector. This system is installed and operated in Incheon, Korea. The thermal capacity of the system is about 5 kW thermal. The aperture diameter of the cylindrical-shape receiver which is made of stainless steel is 100 mm, and the height is 210 mm. Experiments are being carried out to investigate the thermal performance variation of the receivers with several design parameters such as the shape of the receiver, the flow directions and the flow rate of air. First, air flows into the upper part of the receiver, which is the opposite side of the aperture. After the air flows through the inside receiver, that goes out of the receiver through 3 exits which are located near the aperture. Second, air flows into the backside of the receiver, Which is the forward side of the aperture. After the air flows through the inside receiver, that goes out of the receiver through 1 exit. The results show that the system efficiency and receiver efficiency increase as the volume flow rate increases as expected.

• Nuclear Engineering and Technology
• /
• 제55권5호
• /
• pp.1677-1686
• /
• 2023

As the demand for the detection of special nuclear materials (SNMs) increases, the use of imaging instruments that can sensitively image both gamma-ray and neutron signatures has become necessary. This study compared the pulse shape discrimination (PSD) performance of gamma/neutron events when employing either a pixelated stilbene or a plastic (EJ-276) scintillator array coupled to a silicon photomultiplier (SiPM) array in a dual-particle imager. The stilbene array allowed a lower energy threshold above which neutron and gamma-ray events can be clearly distinguished. A greater number of events can, therefore, be used when forming both gamma-ray and neutron images, which shortens the time required to acquire the images by nearly seven times.

• 한국광학회지
• /
• 제19권4호
• /
• pp.327-333
• /
• 2008

일반적으로 NA(Numerical aperture)가 큰 렌즈를 사용하면 획득된 영상의 품질이 좋아진다. 오목거울은 NA가 크면서 직경이 크게 제작하는 비용이 저렴하다. 본 논문에서는3차원 형상 측정용 모아레 영상의 품질향상을 위해 NA가 큰 대구경 오목거울을 이용한 방법을 제안하고 구현하였다.오목거울은 빛을 반사하는 면이 오목한 거울로써, 가까운 거리에 있는 물체를 볼 때, 물체와 모양은 같고 크게 보이는 것이 특징이다. 보통의 경우, 작은 것을 크게 보거나 빛을 모으는데 이용한다. 오목거울의 집광 특징은 볼록거울과 방향만 다를 뿐 동일한 역할을 하고, 수 미터 직경의 대구경으로 제작하기 용이하며, 대구경이면서 $0.8{\sim}2$의 높은 NA를 갖는 오목거울을 구현하기 용이하다. 오목거울의 볼록 렌즈와 동일한 집광 특징을 이용하여 망원경 등의 반사경으로 많이 이용하고 있다. 3차원 영상획득 방법을 위해 필요한 장치는 광을 출사하는 광원,광원으로부터 출사된 광을 집광하기 위한 집광렌즈,집광렌즈를 통해 집광되어 입사되는 광을 투과시키는 격자,격자로부터의 출사 광을 평행광으로 출사하는 영사렌즈,영사렌즈의 평행광을 반사시켜 전량의 광을 측정대상물 쪽으로 출사하는 오목거울 그리고 측정 제품으로부터 반사된 반사광을 획득하는 CCD 카메라를 포함한다. 대구경 오목거울로 NA값을 변화시켜서 표면의 굴곡이 심한 납볼의 영상을 획득하여 품질향상 정도를 평가하였다. NA가 $0.15{\sim}0.8$까지 변화했을 때 영상 내 밝은 부분과 어두운 부분의 차이가 $46{\sim}1.33$배로 변화하여 NA를 높이면 영상의 품질이 향상됨을 알 수 있었다.

• Current Optics and Photonics
• /
• 제8권5호
• /
• pp.484-492
• /
• 2024

In response to the difficulty of synchronously obtaining multiwavelength images for fast two-dimensional (2D) temperature measurement, a multispectral framing imaging optical system is designed, based on the segmented-aperture imaging method and asymmetric surface shape. The system adopts a common-aperture four-channel array structure to synchronously collect multiwavelength temperature-field images. To solve the problem of asymmetric aberration caused by being off-axis, a model of the relationship between incident and outgoing rays is established to calculate the asymmetric custom surface. The designed focal length of the optical system is 80 mm, the F-number is 1:3.8, and the operating wavelength range is 0.48-0.65 ㎛. The system is divided into four channels, corresponding to wavelengths of 0.48, 0.55, 0.58, and 0.65 ㎛ respectively. The modulation transfer function value of a single channel lens is higher than 0.6 in the full field of view at 35 lp/mm. The experimental results show that the asymmetric-custom-surface imaging system can capture clear multiwavelength images of a temperature field. The framing imaging system can capture clear images of multiwavelength temperature fields, with high consistency in images of different wavelengths. The designed optical system can provide reliable multiwavelength image data for 2D temperature-field measurement.

• 한국음향학회지
• /
• 제25권4호
• /
• pp.172-177
• /
• 2006

소나 시스템의 표적 탐지 성능을 향상시키기 위한 방법으로 합성 어퍼쳐 소나 (SAS : Synthetic Aperture Sonar)에 대한 연구와 실험이 이루어지고 있다. 본 논문에서는 한국 근해에서 견인 어레이를 통해 획득한 데이터를 이용하여 합성을 하는 실험을 수행하였다. 실제 상황에서 형상이 왜곡된 견인 어레이의 형상을 추정하여 왜곡을 보상해주고, 대표적인 합성 기법인 ETAM 기법과 같이 어퍼쳐 영역에서 합성을 하는 실험을 하였다. 함속이 일정하게 유지되는 구간의 데이터에 대해 실험한 결과 표적 신호의 코히어런스가 유지되는 약 1분여 동안 SNR이 높아지고 주엽 (main lobe)의 빔폭이 좁아지는 합성 효과가 나타남을 알 수 있었다. 또한 시간이 지남에 따라서도 합성 효과가 지속적으로 나타남을 확인하였다.