• 한국표면공학회지
• /
• 제55권6호
• /
• pp.425-432
• /
• 2022

Antifouling paints that inhibit the attachment and contamination of marine organisms mainly use TBT compounds, but because of their toxic components, they cause ecosystem disturbance and environmental destruction problems, so It is necessary to research eco-friendly antifouling paints that are easy to maintain and effective antifouling technologies. In this study, physical surface treatment of silane coating and chemical antifouling technology were applied to the metal surface to secure the stability of the surface of the marine structure and inhibit the attachment and growth of marine organisms. Adhesion of marine organisms was evaluated according to the coating conditions through surface evaluation of the charged material for 15 months in the waters of the west coast of Korea. In accordance with ASTM D6990-05, antifouling properties fouling rates (FR) and physical degradation rates(PDR) were evaluated through visual inspection of the evaluation specimens. As a result of evaluating the antifouling performance of the coated surface, it was confirmed that the antifouling performance was maintained at the 50% level even after 15 months in the sample subjected to physical processing and silane coating.

• 한국가시화정보학회지
• /
• 제11권2호
• /
• pp.18-26
• /
• 2013

An accurate and reliable performance evaluation technique is indispensable for the development of marine antifouling coatings. The existing standard practice is however, based on the visual observation of biofouling settlement area, which is prone to the subjective judgment of the inspector. In spite of the above mentioned importance, a systematic and objective fouling evaluation technique has not yet been introduced. In this study, a novel quantitative antifouling performance evaluation method for marine antifouling paints is devised based on the image analysis of panel immersion test results. The present image analysis method is to quantify settlement area for each fouling category by distinctive color. The fouling categories are set as unfouled, biofilm, green algae, brown algae, calcareous animal and spongy animal with specific HSL (Hue, Saturation, Lightness) color ranges. In order to assess the effectiveness of the proposed method, static immersion tests for three antifouling coatings were undertaken for two years.

• 한국구조물진단유지관리공학회 논문집
• /
• 제27권5호
• /
• pp.1-8
• /
• 2023

해양 및 수리구조물은 수분침투뿐만 아니라 해양의생물의 부착 등에 의해서도 내구손상이 발생하게 된다. 따라서 본 연구에서는 해양 콘크리트 등을 위해 자가세척기능을 갖는 방오 코팅제를 개발하고자 하였다. AKD와 셀룰로오스 나노섬유 및 BADGE를 혼합한 방오코팅제를 접촉각 140°내외의 소수성과 기울임각 15°에서 충분한 방오성능 확보한 것으로 확인하였다. 표면의 내마모성 시험에서는 최대 0.015g의 손실만이 발생하는 것으로 나타났다. 내구성 실험에서도 염소이온투과시험결과 코팅제가 도포된 변수에서는 염소이온의 투가가 거의 발생하지 않았으며, 탄산화와 동결융해 손상 또한 역시 거의 발생하지 않아 콘크리트의 내구성 확보에서도 효과가 있는 것으로 분석되었다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2013년도 춘계학술대회
• /
• pp.134-135
• /
• 2013

이 연구에서는 해양생물 부착 방지 도료를 만들기 위해 표면장력이 낮은 실리콘계 폴리머를 합성하여 도료를 제조하고 물리적인 특성 및 방오성을 고찰하였다. 도장 시스템은 하도/중도로 방청도료를 적용하고 상도로 제조한 도료를 사용하여 도막물성을 평가하였다. 평가결과 도막이 평활하고 낮은 표면장력과 탄력성을 지녀 해양생물의 고착 및 기계적 접착을 저해하여 우수한 방오성능을 나타냄을 확인하였다.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.378-378
• /
• 2006

The preparation, characterization, and bio-testing of biocide incorporated silicone coatings for marine applications have been conducted. Derivatives of the biocide, Triclosan (5-chloro-2-(2, 4-dichlorophenoxy) phenol), were used to covalently attach the biocide moiety to a silicone backbone. The synthetic process allowed for control of the resulting coating's mechanical properties as well as antifouling/fouling release performance in laboratory and ocean site testing. The test results showed significantly reduce macro fouling with sustained fouling release characteristics for the coatings produced.

• 청정기술
• /
• 제23권2호
• /
• pp.148-157
• /
• 2017

To prepare UV-curable polyurethane-acrylate oligomer, NCO-terminated urethane prepolymers with trimethylolpropane, [TMP; 0 (0), 0.1 (0.021) and 0.2 (0.043) mole (mole fraction)] as crosslinkable tri-functional chain extender were end-capped with pentaerythritol triacrylate [PETA; 2.0 (0.400), 1.7 (0.354) and 1.4 (0.304) mole (mole fraction)] with one hydroxyl group/three vinyl functionalities. The stable as-formulated UV-curable polyurethane-acrylates [stable mixtures of PETA-capped oligomer/reactive acrylic monomer diluents without/with heptadecafluorodecyl methacrylate (PFA; 0, 6 and 9 wt%)] were formed up to 0.2 (0.043) mole (mole fraction) of TMP content in the prepolymer, while homogeneous-mixing failed at 0.3 (0.068) mole (mole fraction), in which the crosslink density in NCO-terminated urethane prepolymer was too high to enable the formation of stable mixture. This study examined the effect of TMP/PETA molar ratio and heptadecafluorodecyl methacrylate (PFA) content (wt%) on the properties of UV-cured polyurethane-acrylates as marine antifouling coating materials. The properties of UV-cured polyurethane-acrylate were found to be significantly dependent on the crosslinkable TMP/PETA ratio and PFA content. With the increasing of the TMP and PFA contents, the contact angles increased, and consequently the surface tension decreased. The adhesion of algae/barnacles to PFA contained film samples were found to be sufficiently weak to allow their easy removal. These results suggest that the UV-cured samples containing PFA have strong potential as coating materials for antifouling applications.

• 한국결정성장학회지
• /
• 제31권3호
• /
• pp.137-142
• /
• 2021

본 연구에서는 상온경화형 silica-based 코팅제의 제조 및 해양구조물에 적용하여 가혹한 해양환경에서 방식 및 방오 성능 발현을 위한 실용화 개발 연구를 수행하였다. 구조상 외부에 노출된 부분이 많은 해양(플랜트) 구조물은 강한 자외선, 극심한 온도차, 염수에 의한 부식 등 가혹한 해양환경에 고립되어 운용된다. 이러한 환경 하에서는 쉽게 열화 되고 파도 등 물리적 자극에도 쉽게 침식되는 유기계 페인트들은 그 역할을 제대로 할 수 없다. 해양구조물에 치밀한 세라믹 코팅을 형성시킬 경우 녹이 발생하지 않고 경도가 높아 시설물을 해수환경 하에서도 치밀하게 보호할 수 있다. 세라믹 코팅제의 경우 그 기능의 장점들로 인해 해양 구조물에서 그 용도와 적용범위는 크게 증진될 수 있을 것이다. 따라서 colloidal silica를 기반으로 실란계 커플링제, 경화제 및 세라믹 충진제로 구성된 silica-based 코팅제 조성개발과 해수중 방식 및 방오용 보호코팅제로의 응용에 대해 연구하였다.

• 한국환경보건학회지
• /
• 제29권3호
• /
• pp.1-8
• /
• 2003

The development of environmentally nontoxic or non-polluting antifouling additives that can be formulated in practical coating requires assay involving target organisms. Described here are the simple laboratory assays that have been developed using the barnacle, Balanus amphitrite, a common fouling organism found throughout temperate and tropical seas. One of the assays depends on synchronous year-round mass culture, the procedure for which is described, of nauplii larvae and cyprids larvae. The laboratory assays provided quantitative estimates of toxicity and settlement inhibition of the test compounds. Laurinterol (1), isolaurinterol (2), alpysinal (3), and aplysin (4) have been isolated from the Korean red alga Laurencia okamurae. Their structures were identified by spectral data in comparison with the literature data. Compounds 1-4 inhibited larval settlement of the barnacle B. amphitrite with EC$_{50}$ values of 0.18- 36 $\mu\textrm{g}$/ml. Com-pounds 2-4 showed larval toxicity against nauplii of the barnacle B. amphitrite with 5-10 $\mu\textrm{g}$/ml, while laurinterol (1) exhibited no toxicity at even 100 $\mu\textrm{g}$/ml. Therefore, laurinterol was expected as a promising natural antifoulant.t.

• 한국건설순환자원학회논문집
• /
• 제11권2호
• /
• pp.120-129
• /
• 2023

해양구조물은 염분에 의한 손상뿐만 아니라 해양미생물과 부유물질의 착상 등에 의해 추가적인 손상이 발생하게 되며, 이를 억제하기 위하여 선박등의 경우에는 주기적인 도장을 통하여 필요성능을 유지하고 있다. 그러나 콘크리트 또는 강재지지구조는 주기적인 도장이 어렵고 해양환경의 오염위험이 존재하는 것이 사실이다. 본 연구에서는 친수성 셀룰로오스 나노섬유와 AKD를 사용하여 소수성능을 갖는 친환경 재료를 사용하여 방오코팅제를 개발하였다. 균질한 배합을 위해 나노섬유의 함량을 1 %로 고정하고, AKD, 증류수와 폐유리를 디지털 교반기와 호모게나이져로 교반 제작하였다. 제작된 코팅제의 접촉각은 130°이상으로 나타났으며, 15°기울기의 물방울 흐름시험에서도 충분한 성능을 갖추고 있어 자가세척기능을 갖춘 것으로 판단된다. 또한 온도에 따른 점성 특성 분석을 통해 상온에서 시공이 가능한 것을 확인하였으며, 미세구조 분석을 통해 콘크리트표면에 코팅제가 균질하게 도포되는 것을 확인하였다.

• 대한조선학회논문집
• /
• 제50권6호
• /
• pp.399-406
• /
• 2013

In the present study, the flat plate model test method is developed to evaluate the skin friction of the marine coating in the cavitation tunnel. Six-component force balance is used to measure the profile drag of the flat plate and strut. LDV(laser Doppler velocimetry) technique is also employed to evaluate the drag and to figure out the reason of the drag reduction. The flow velocities above the surface can be used to assess the skin friction, combined with direct force measurement. Since the vortical structure in the coherent turbulence structure influences on the skin friction in the high Reynolds number regime, the interaction between the turbulence structure and the surface wall is paying more attention. This sort of thing is important in the passive control of the turbulent boundary layer because the skin friction can't be determined only by wall condition. As complicated flow phenomena exist around a paint film, systematic measurement and analysis are necessary to evaluate the skin friction appropriately.