• Plant Journal
• /
• v.15 no.4
• /
• pp.36-42
• /
• 2019

In recent, according to the tightening of environment regulation policy, the height of the site of the power plant is increased and the length of the cooling water pipe is increased. This has a serious impact on the stability of the plant. This study analyzes the transient phenomenon using LIQT 7.2, an unsteady state one-dimensional analysis software, to secure the stability of 1,000 MW high-capacity coal-fired power plant cooling water system with high head. To prevent water hammer, The effects on performance characteristics were predicted by individual and combination application. The surge pressure of the cooling water which occurs when the pump was stopped without installing the anti-surge devices was the largest at the pump outlet side. The most effective and simple way to reduce surge pressure in these cooling water systems is to combine a vacuum breaker with a hydraulic non-return valve, which is an essential device for pump protection.

• Journal of Korean Neurosurgical Society
• /
• v.64 no.6
• /
• pp.873-881
• /
• 2021

Objective : Peripheral nerve injuries occur mostly as a result of mechanical trauma. Due to the microvascular deterioration in peripheral nerve damage, it becomes challenging to remove free oxygen radicals. Gallic acid is a powerful antioxidant with anti-inflammatory effects and a free radical scavenger. The purpose of the study is to show that gallic acid contributes to the restorative effect in mechanical nerve damage, considering its antioxidant and anti-inflammatory effects. Methods : Thirty male Sprague Dawley albino mature rats were included in the study. Ten of them constituted the control group, 10 out of 20 rats for which sciatic nerve damage was caused, constituted the saline group, and 10 formed the gallic acid group. Post-treatment motor functions, histological, immunohistochemical, and biochemical parameters of the rats were evaluated. Results : Compared to the surgery+saline group, lower compound muscle action potential (CMAP) latency, higher CMAP amplitude, and higher inclined plane test values were found in the surgery+gallic acid group. Similarly, a higher nerve growth factor (NGF) percentage, a higher number of axons, and a lower percentage of fibrosis scores were observed in the surgery+gallic acid group. Finally, lower tissue malondialdehyde (MDA) and higher heat shock protein-70 (HSP-70) values were determined in the surgery+gallic acid group. Conclusion : Gallic acid positively affects peripheral nerve injury healing due to its anti-inflammatory and antioxidant effects. It has been thought that gallic acid can be used as a supportive treatment in peripheral nerve damage.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.3
• /
• pp.595-598
• /
• 2010

Ab initio and DFT molecular orbital calculations predict that acetyl radical reacts with acetylene through interactions primarily involving the SOMO of the radical and the in-plane ${\pi}$-bond of acetylene. An energy barrier (${\Delta}E_1$) of 39.6 kJ $mol^{-1}$ is predicted for the preferred anti arrangement of reactants at the CCSD(T)/cc-pVDZ//BHandHLYP/cc-pVDZ level of theory. NBO analysis reveals additional interactions between the radical SOMO and the nearby C-H ${\sigma}$-bond in acetylene worth about 10% of the total transition state interaction energy. This type of orbital interaction has not previously been observed in radical addition reactions involving C-C ${\pi}$-bonds.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.1
• /
• pp.314-319
• /
• 2015

The conventional geometry of a plate microstrip resonator is made up of a single metallic patch, which is printed on a monolayer dielectric substrate. Its arrangement is simple and easy to make, but it is limited in its functional abilities. Many searches have been realized to improve the bandwidth and the gain of the microstrip resonators. Among the various configurations proposed in the open literature, the stacked geometry seems to be very promising. By appropriate design, it is able to provide the operation in dual frequency mode, wide bandwidth enough and high gain. The theoretical investigations of structures composed of two stacked anti-reflection coatings, enhanced metallic coatings are available in the literature, however, for the stacked configurations involving three metallic coatings or more, not to exact or approximate analysis was conducted due to the complexity of the structure.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.4
• /
• pp.941-949
• /
• 1995

An efficient method based on analytic solutions is applied to solve anti-plane Mode III crack problems. The analytic technique developed earlier by the present authors for Laplace's equation in a simply-connected region is now extended to general Mode III crack problems. Unlike typical numerical methods which require fine meshing near crack tips, the present method divides the cracked bodies, typically non-convex or multiply-connected, into only a few super elements. In each super element, an element stiffness matrix, relating the series coefficients of the traction and displacement, is first formed. Then an assembly algorithm similar to that used in the finite elements, is first formed. Then an assembly algorithm similar to that used in the finite elements, is developed. A big advantage of the present method is that only the boundary conditions are to be satisfied in the solution procedure due to the use of analytic solutions. Several numerical results demonstrate the efficiency and accuracy of the present method.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.2
• /
• pp.29.2-29.2
• /
• 2015

Interactions such as mergers and flybys play a fundamental role in shaping galaxy morphology. We used the Horizon Run 4 cosmological N-body simulations to study the aligments of spins and shapes of interacting haloes as a function of the halo mass and large-scale density. Interactions preferentially occur in the plane of rotation, and in the direction of the major axis of prolate haloes, and the trajectories are preferentially radial and prograde. We found a very strong alignment of the shapes already at redshift as high as 4. The spins are initially unaligned or even anti-aligned, and become more and more aligned as the redshift decreases. The alignment signals are stronger and evolve more at lower densities, and mass plays a secondary role.

• Journal of Mechanical Science and Technology
• /
• v.18 no.9
• /
• pp.1582-1589
• /
• 2004

The dynamic response of an eccentric Griffith crack in functionally graded piezoelectric ceramic strip under anti-plane shear impact loading is ana lysed using integral transform method. Laplace transform and Fourier transform are used to reduce the problem to two pairs of dual integral equations, which are then expressed to Fredholm integral equations of the second kind. We assume that the properties of the functionally graded piezoelectric material vary continuously along the thickness. The impermeable crack boundary condition is adopted. Numerical values on the dynamic stress intensity factors are presented for the functionally graded piezoelectric material to show the dependence of the gradient of material properties and electric loadings.

• Journal of Mechanical Science and Technology
• /
• v.18 no.8
• /
• pp.1375-1387
• /
• 2004

A solution is given for the elastodynamic problem of a crack perpendicular to the graded interfacial zone in bonded materials under the action of anti plane shear impact. The interfacial zone is modeled as a nonhomogeneous interlayer with the power-law variations of its shear modulus and mass density between the two dissimilar, homogeneous half-planes. Laplace and Fourier integral transforms are employed to reduce the transient problem to the solution of a Cauchy-type singular integral equation in the Laplace transform domain. Via the numerical inversion of the Laplace transforms, the values of the dynamic stress intensity factors are obtained as a function of time. As a result, the influences of material and geometric parameters of the bonded media on the overshoot characteristics of the dynamic stress intensities are discussed. A comparison is also made with the corresponding elastostatic solutions, addressing the inertia effect on the dynamic load transfer to the crack tips for various combinations of the physical properties.

• Structural Engineering and Mechanics
• /
• v.27 no.5
• /
• pp.609-623
• /
• 2007

The problem of a semi-infinite magneto-electro-elastically impermeable mode-III crack in a magneto-electro-elastic material is considered under the action of impact loads. For the case when a pair of concentrated anti-plane shear impacts, electric displacement and magnetic induction impacts are exerted symmetrically on the upper and lower surfaces of the crack, the magneto-electro-elastic field ahead of the crack tip is determined in explicit form. The dynamic intensity factors and dynamic energy density factor are obtained. The method adopted is to reduce the mixed initial-boundary value problem, by using the Laplace and Fourier transforms, into three simultaneous dual integral equations, one of which is converted into an Abel's integral equation and the others into a singular integral equation with Cauchy kernel. Based on the obtained fundamental solutions of point impact loads, the solutions of two kinds of different loading cases are evaluated by integration. For some particular cases, the present results reduce to the previous results.

• Structural Engineering and Mechanics
• /
• v.64 no.1
• /
• pp.71-79
• /
• 2017

In this study, interaction of several interface cracks located between a functionally graded material (FGM) layer and an elastic layer under anti-plane deformation based on the distributed dislocation technique (DDT) is analyzed. The variation of the shear modulus of the functionally graded coating is modeled by an exponential and linear function along the thickness of the layer. The complex Fourier transform is applied to governing equation to derive a system of singular integral equations with Cauchy type kernel. These equations are solved by a numerical method to obtain the stress intensity factors (SIFs) at the crack tips. The effects of non-homogeneity parameters for exponentially and linearly form of shear modulus, the thickness of the layers and the length of crack on the SIFs for several interface cracks are investigated. The results reveal that the magnitude of SIFs decrease with increasing of FG parameter and thickness of FGM layer. The values of SIFs for FGM layer with exponential form is less than the linear form.