• Applied Chemistry for Engineering
• /
• v.16 no.3
• /
• pp.449-455
• /
• 2005

Electron beam (EB) and ultraviolet (UV) curable monomers (AF-1 with mono functionality and AF-2 with tetra functionality) containing hydroxy and acrylate group for anti-fogging coating were synthesized and applied to EB and UV-curable coating systems. The synthesized reactive AF-1 and AF-2 monomers were first formulated into UV-curable system and the optimization of film properties for anti-fogging coating was investigated. The 5:17.5 ratio for AF-1 and AF-2 was found to be the best optimized formulation for anti-fogging coating without destroying the other essential properties such as hardness, solvent resistance, and adhesion. The optimized formulation was applied to the EB-curable system, and EB and UV-curable systems were compared. The results demonstrated that both EB and UV-cured films coated on PC sheet showed excellent anti-fogging properties; however, the EB-cured film exhibited better hardness, adhesion, and water repellent properties than the UV-cured film.

• Korean Journal of Materials Research
• /
• v.31 no.1
• /
• pp.8-15
• /
• 2021

Transparent, photocatalytic, and self-cleaning TiO2 thin film is developed by TiO2 sol-gel coating on glass and polycarbonate (PC) substrates. Acetyl acetone (AcAc) suppresses the precipitation of TiO2 by forming a yellowish (complex) transparent sol-gel. XPS analysis confirms the presence of Ti2p and O1s in the thin films on glass and PC substrates. The TiO2-sol is prepared by stabilizing titanium (IV) isopropoxide (TTIP) with diethylamine and methyl alcohol. The addition of AcAcsilane coupling solution to the TiO2-sol instantaneously turns to yellowish color owing to the complexing of titanium with AcAc. The AcAc solution substantially improves the photocatalytic property of the TiO2 coating layer in MB solutions. The coated TiO2 film exhibits super hydrophilicity without and with light irradiation. The TiO2 thin film stabilized by adding 8.7 wt% AcAc shows the highest photo-degradation for methylene blue (MB) solution under UV light irradiation. Also, the optimum photocatalytic activity is obtained for the 8.7 wt% AcAc-stabilized TiO2 coating layer calcined at 450 ℃. The thin-films on glass exhibit fast self-cleaning from oleic acid contamination within 45 min of UV-light irradiation. The appropriate curing time at 140 ℃ improves the anti-fogging and thermal stability of the TiO2 film coated on PC substrate. The watermark-free PC substrate is particularly beneficial to combat fogging problems of transparent substrates.

• Korean Chemical Engineering Research
• /
• v.40 no.6
• /
• pp.735-740
• /
• 2002

In order to improve the anti-fogging property of polymer films, organic-inorganic hybrid coating solutions which have good hydrophilic property and transmission in the range of visible light were synthesized by the sol-gel method. The coating solutions were prepared by adding glycidoxypropyl trimethoxysilane(GPS) to a colloidal silica(15 nm) suspension(Ludox). GPS as silane coupling agent forms strong bonds to the colloidal silica and surrounding polymer matrix and links two different materials together. Solutions prepared by addition of GPS at the acidic condition resulted in coatings that were less prone to cracking, while those at the basic condition caused coatings with more cracking. These resulted in better hydrophilic property and transmission in the range of visible light for the solution prepared at the acidic condition(pH 2). Compared with coatings under acidic conditions, coatings prepared at basic conditions showed worse hydrophilic property and transmission in the range of visible light.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.273-273
• /
• 2012

최근 스마트 윈도우, 자가세정(Self-Cleaning), 김서림방지(Anti-Fogging), 디스플레이 표시장치, 대전방지 코팅 등 다각적으로 활용이 가능한 PTFE (Ploytetrafluoroethylene)를 Sol-gel, Sputtering, Spin-Coating, CVD (Chemical vapor deposition)방법을 이용하여 낮은 표면에너지와 나노사이즈의 표면 거칠기를 가지는 $150^{\circ}$ 이상의 초-발수성 표면에 대한 많은 연구가 진행되고 있다. 본 실험에서는 영구자석을 이용한 고밀도 플라즈마로 높은 점착성과, 균일한 박막 및 대 면적 공정이 가능한 RF-magnetron sputtering방법을 이용하여 Plasma etching으로 표면적의 거칠기와 낮은 표면에너지를 만든 뒤, 발수특성을 가진 PTFE를 증착하여 접촉각 변화와 구조적 및 광학적 특성을 측정하였다. AFM (Atomic Force Microscope)측정결과 100 w에서 가장 높은 1.7 nm의 RMS(Root mean square)값이 측정되었고, 접촉각 측정결과 Plasma etched glass는 25 w에서 125 w로 증가함에 따라 친수성을 나타내었으며, 100 w에서 가장 낮은 $15^{\circ}$의 접촉각을 나타내었다. PTFE박막을 증착하였을 때는 100 w에서 $150^{\circ}$의 초발수 특성을 나타내었고, 투과율 측정 결과 85%이상의 높은 투과율을 나타내었다. Plasma etching을 이용한 PTFE 발수 특성은 비가 오면 자동으로 이물질이 씻겨 내리는 자동차 유리등의 개발이 가능하고, 높은 투과율이 요구되는 액정표시장치(LCD)같은 차세대 대형 디스플레이의 표면 코팅에 사용이 가능 할 것이라 사료된다. 본 연구는 중소기업청에서 지원하는 2011년도 산학연 공동기술개발 지원사업의 연구수행으로 인한 결과물임을 밝힙니다.