• 대한인간공학회지
• /
• 제23권3호
• /
• pp.13-24
• /
• 2004

Anthropometric data is a fundamental resource in developing ergonomic products and workplaces. However, designers often experience difficulty in searching anthropometric data relevant to the design due to the technicality of anthropometric terminologies, ambiguity in the description of measurement method for some anthropometric variables, and inefficiency of existing search methods for anthropometric data. The present study suggests a method to develop a classification system of anthropometric variables for systematic, efficient search of anthropometric data. The proposed method first classifies anthropometric variables according to body segment and type of variable, and then arranges anthropometric variables of the same body segment and variable type by comparing the heights of their reference points. The proposed classification method was applied to establish a classification system of 66 anthropometric variables that were selected for an automotive interior design. Then the established anthropometric classification system was utilized to design a search interface of a web-based anthropometric data retrieval system.

• 대한인간공학회지
• /
• 제26권3호
• /
• pp.111-115
• /
• 2007

Design equations for anthropometric product design are developed by considering the geometrical relationships of design dimensions and anthropometric dimensions. The present study applied the design structure matrix (DSM) method to the development of design equations for a computer workstation, and compared design values from the design equations with corresponding design values of ergonomic recommendations and existing products. The relationships between design dimensions (e.g., legroom and worktable) were analyzed by a DSM, and then the application order of design equations (e.g., seatpan, backrest, armrest, legroom, and worktable in descending order) was determined. Next, design equations were developed by analyzing the geometric relationships between computer workstation design dimensions and anthropometric dimensions. Finally, design values for a computer workstation were determined by considering a standard posture defined and representative human models (5th, 50th, 95th %ile). The design values calculated using the design equations were similar with those of ergonomic recommendations found in literature and two commercial products measured in the study; however, some design values (e.g., seatpan height) were different due to discrepancy in standard posture. The DSM method would be utilized to systematically analyze the relationships between design dimensions for anthropometric product design.

• 대한인간공학회지
• /
• 제28권2호
• /
• pp.17-26
• /
• 2009

In this study, anthropometric analysis and usability evaluation for four-wheeled walker were carried out and then ergonomics design guidelines were proposed. In anthropometric analysis, design factors of four-wheeled walker were firstly identified and anthropometric design guidelines were made using Korean human scales. Design suitability for two typical four-wheeled walkers was analyzed in based on anthropometric design guidelines. Usability evaluation for two typical walkers was also performed through observation method and expert evaluation. Several usability problems were identified and design solutions were proposed for the design improvement of four-wheeled walker. Finally a design model of four wheeled walker considering analysis results was proposed.

• 대한인간공학회지
• /
• 제31권1호
• /
• pp.211-217
• /
• 2012

Objective: The aim of this study is to show a correct application procedure using the compact Korean anthropometric data application program called Korean Human Scale(KHS) for anthropometric design. Background: The nation-wide anthropometric survey project called 'Size Korea' developed KHS and distributed it to the public on the web site. But some insufficiency of the current web service of KHS misleads the users; they just put their own statue and pick up a meaningless data for a body dimension. Method: This study provides five steps to follow to read appropriate data from KHS for an anthropometric design. Results: As a case study, the depth dimension of the supervisory and control console used in the Korea nuclear power plant was determined following the procedure and compared with the console design guideline recommendation. Conclusion: The supplementary anthropometry table should be added on the web service of KHS for users to read a meaningful data for design. Application: If properly used, the KHS has a lot more potential application area than users can expect such as in control center design area.

• 산업공학
• /
• 제24권4호
• /
• pp.420-427
• /
• 2011

The present study developed an anthropometric design method accommodating physical human variabilities for user-centered product development. The proposed design method is based on the boundary zone method, a technique to generate a group of humanoids properly representing the body size diversity of thedesign target population. In addition, the anthropometric design method considers the variability of postures in the design process by incorporating the simulation of posture. The effectiveness of the proposed design method was evaluated in terms of multivariate accommodation percentage (MAP) by applying it to designing a computer workstation with 90% of accommodation percentage. The performance evaluation showed that the MAP (89%) of the computer workstation design produced by the proposed method was quite close to the designated accommodation percentage. The proposed design method can be of use to develop an effective anthropometric design for user-centered product development.

• 산업공학
• /
• 제8권1호
• /
• pp.15-21
• /
• 1995

Since anthropometric data are essential to the design of industrial products, the national anthropometric survey was performed three times in Korea. An Anthropometric Data Manager system (ADaM) was implemented based on the 1992 national anthropometric survey to promote the utilization of the data. The system provides graphic user interface to facilitate usability. Anthropometric information can be obtained in various ways by the following statistical analyses; multivariate features analysis, correlation analysis, and regression. In addition, recommendations for design parameters of industrial products were provided in this system.

• 대한인간공학회지
• /
• 제25권2호
• /
• pp.85-94
• /
• 2006

The purpose of this study is to extract typical body shapes of Korean adults based on the three-dimensional Korean anthropometric data measured through 5th national anthropometric survey and to examine the suitability of the 3-D human shape data for the interior packaging. 36 three-dimensional anthropometric variables related to the design of vehicle interior were considered for the appraisal of typical body shapes. Four major factors were extracted by the factor analysis and factor scores were calculated for all subjects. Typical or standard drivers of Korean adults were selected by the minimum deviation criteria for the four factor scores with respect to 5th, 50th, and 95th percentiles, respectively. Typical drivers of Korean adults were visualized by the CATIA-HUMAN program due to the absence of proper application software for three-dimensionally scanned human body data. There are considerable differences between the anthropometric data of Korean adults and those provided by CATIA-HUMAN program, which shows that the modeling data provided by CATIA-HUMAN should not be directly applied to the ergonomic evaluation for the vehicle design. This suggests the necessity for the development of suitable software for scanned human shape data. It is also expected that the anthropometric data of typical drivers extracted from this study help design package layouts and improve the suitability of ergonomic evaluation for Korean customers.

• 대한인간공학회지
• /
• 제34권1호
• /
• pp.29-43
• /
• 2015

Objective: The aim of this study is to develop management guidelines and a procedure for an anthropometric suitability assessment of the main control room (MCR) in nuclear power plants (NPPs). Background: The condition of the MCR should be suitable for the work crews in NPPs. The suitability of the MCR depends closely on the anthropometric dimensions and ergonomic factors of the users. In particular, the MCR workspace design in NPPs is important due to the close relationship with operating crews and their work failures. Many documents and criteria have recommended that anthropometry dimensions and their studies are one of the foremost processes of the MCR design in NPPs. If these factors are not properly considered, users can feel burdened about their work and the human errors that might occur. Method: The procedure for the anthropometric suitability assessment consists of 5 phases: 1) selection of the anthropometric suitability evaluation dimensions, 2) establishment of a measurement method according to the evaluation dimensions, 3) establishment of criteria for suitability evaluation dimensions, 4) establishment of rating scale and improvement methods according to the evaluation dimensions, and 5) assessment of the final grade for evaluation dimensions. The management guidelines for an anthropometric suitability assessment were completed using 10 factors: 1) director, 2) subject, 3) evaluation period, 4) measurement method and criteria, 5) selection of equipment, 6) measurement and evaluation, 7) suitability evaluation, 8) data sharing, 9) data storage, and 10) management according to the suitability grade. Results: We propose a set of 17 anthropometric dimensions for the size, cognition/perception action/behavior, and their relationships with human errors regarding the MCR design variables through a case study. The 17 selected dimensions are height, sitting height, eye height from floor, eye height above seat, arm length, functional reach, extended functional reach, radius reach, visual field, peripheral perception, hyperopia/myopia/astigmatism, color blindness, auditory acuity, finger dexterity, hand function, body angle, and manual muscle test. We proposed criteria on these 17 anthropometric dimensions for a suitability evaluation and suggested an improvement method according to the evaluation dimensions. Conclusion: The results of this study can improve the human performance of the crew in an MCR. These management guidelines and a procedure for an anthropometric suitability assessment will be able to prevent human errors due to inadequate anthropometric dimensions. Application: The proposed set of anthropometric dimensions can be integrated into a managerial index for the anthropometric suitability of the operating crews for more careful countermeasures to human errors in NPPs.

• 대한인간공학회지
• /
• 제36권5호
• /
• pp.373-383
• /
• 2017

Objective: The aim of this study is to introduce an operator console design review system suitable for designing and evaluating consoles based on human factor guidelines for a digitalized main control room in an advanced nuclear power plant which has a requirement for anthropometric data usage. Background: The system interface of the main control room in a nuclear power plant has been getting digitalized and consists of various consoles with many information displays. Console operators often face human-computer interactive problems due to inappropriate console design stemming from the perceptual constraints of anthropometric data usage. Method: Computational models with a process of visual perception and variables of anthropometric data are used for designing and evaluating operator consoles suitable for human system interface guidelines, which are used in an advanced nuclear power plant. Results: From the computational model and simulation application, console dimensions and a designing test module, which would be used for designing suitable consoles with safety concerns in a nuclear power plant, have been introduced. Conclusion: This case study may influence employing a suitable design concept with various anthropometric data in many areas with safety concerns and may show a feasible solution to designing and evaluating the safety console dimensions. Application: The results of this study may be used for designing a control room with the human factors requiring a safe working environment.

• 대한인간공학회지
• /
• 제28권4호
• /
• pp.125-137
• /
• 2009

Recently, the frequency in use of electric adjustable bed is going up by an increase in the elderly population. In bad ergonomic design for an electric adjustable bed causes some problems in the aspects of usability and safety. In particular, lots of accidents came from going up or going down an electric adjustable bed. In that case, the height of bed is very important factor for preventing an accident. This problem is related to its anthropometric factors. Therefore we carried out its anthropometric analysis and old people's standing action according the height of electric adjustable bed as an experimental study. As a result, we proposed some anthropometric design criteria and identified the effect of bed height when old people use it.