• 디지털산업정보학회논문지
• /
• 제9권2호
• /
• pp.11-15
• /
• 2013

We in order to use WLAN communication device planned wireless USB dongle internal antenna of 2.4 GHz/5.8 GHz band. So it uses square patch dual-wideband and quality is satisfactory and it designed print folded monopole antenna of the shape which is simple. The thickness of the antenna was fed by a $50{\Omega}$ coaxial cable feeding 1mm dielectric constant 4.4 FR4 substrate was used. The overall size of the antenna is $20mm{\times}50mm$. So the internal antenna is suitable. Measurement results of the fabricated antenna, the return loss of more than 10 dB in the two bands could be obtained. Radiation pattern has a maximum gain of 3.75 dBi value.

• 한국군사과학기술학회지
• /
• 제6권3호
• /
• pp.113-121
• /
• 2003

In this paper, the transmit antenna for the space feeder used for the phased array antennas is investigated. The multi-aperture horn antenna is proposed as the transmit antenna and the characteristics are verified with the Matlab coding, HFSS of Ansoft Corp., and MWS of CST Corp., The E-plane and H-plane beam patterns of the multi-aperture horn antenna are nearly symmetrical and the sidelobe level of the I-plane beam pattern is lower than that the of general pyramidal horn antenna. The fabricated multi-aperture horn antenna is measured using the near-field measurement system. The measured results show good agreement with the simulated ones.

• 전기전자학회논문지
• /
• 제13권2호
• /
• pp.220-223
• /
• 2009

A simple measurement system is built to estimate the dual-antenna diversity gain at 2.4GHz easily in open lab environment. To obtain multipath fading propagation channel, the system consists of two transmission horn that placed on opposite direction and a rotating stage mechanically changing the position of test dual-antenna with time over distance greater than one wavelength. Estimated diversity is nearly same as theoretical value such that measured diversity gain of 30mm separated is about 6dB similar to theoretical value of 5.7dB and increases monotonically with the increasing separation distance as predicted by the theory. Proposed measurement system that is simple enough to fit in a small space can evaluate the performance of various dual-antennas with a reasonable accuracy with lower 5% difference between the ten sets of measured waveform distribution and theoretical Rayleigh cumulative distribution.

• 한국전기전자재료학회논문지
• /
• 제25권9호
• /
• pp.727-731
• /
• 2012

This paper dealt with the measurement and analysis of electromagnetic waves radiated from a partial discharge (PD) source in insulation oil to apply condition monitoring of oil-immersed transformers. Two types of narrow-band monopole antennas with the resonant frequency of a 500 MHz and a 1 GHz were designed and fabricated. Also, a needle-plane electrode system was manufactured to simulate PDs and the curvature radius of the needle is 10 ${\mu}m$ and the diameter of the plane is 60 mm. Electromagnetic wave was measured by the PD measurement system with the monopole antennas. Detection sensitivity of the fabricated antenna was compared for the same PD magnitude; 620 $mV_{peak}$ for the 500 MHz antenna and 960 $mV_{peak}$ for the 1 GHz antenna to the PD magnitude of 74 pC. Consequently, the 1 GHz monopole antenna is more effective to detect PDs in oil-immersed transformers.

• 한국전자파학회논문지
• /
• 제14권7호
• /
• pp.669-676
• /
• 2003

본 논문에서는 평행판 도파관의 원리를 이용한 초광대역 TEM 혼 안테나의 설계방법을 제안한다. TEM 모드 발생의 원리를 분석하고, TEM 혼 안테나의 특성을 실험적으로 고찰하였다. 제안된 TEM 혼 안테나는 정한 대역폭을 확장하기 위해 안테나의 두 도체판을 지수함수적으로 증가시켜 정합시킨다. 또한 안테나의 길이를 줄이고 개구부의 길이를 증가시켜 최소주파수를 떨어뜨림으로써 대역폭을 확장하였다. 제작된 TEM 혼 안테나의 측정결과, 75 MHz~1200 MHz 범위에서 정재파비 2이하를 만족하는 광대역 특성을 보이며, 선형구조의 TEM 혼 안테나보다 대역폭이 2배 이상 증가되었다. 제작된 안테나는 임펄스 응답 특성을 요구하는 광대역 시스템에 활용 가능하리라 기대된다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.893-899
• /
• 2014

X-band antenna has been widely used to effectively transmit the high resolution image data from the observation satellite to the ground station. To achieve above mission, X-band antenna is mainly composed of the 2-axis gimbal system using stepping motors and gears. However, the micro-vibration induced by the stepping motor actuation and the imperfect gear teeth alignment during this on-orbit operation is the main source of image quality degradation. In this paper, X-band antenna combined with a blade gear for micro-vibration isolation was suggested and investigated. The structural safety of the blade gear with low rotational stiffness was confirmed by structure analysis based on the derived torque budget. The isolation performance of the X-band antenna with the blade gear was verified through micro-vibration measurement test using the dedicated micro-vibration measurement device proposed in this study.

• 한국전자통신학회논문지
• /
• 제13권1호
• /
• pp.245-252
• /
• 2018

본 논문에서는 CSRR구조의 대역제거특성을 이용하여 정지위성용 이중대역 원편파안테나를 설계하였다. 정지위성의 송신(1525~1559MHz)과 수신주파수(1626.5~1660.5MHz)사이에 대역저지 특성을 갖기위하여 사각 CSRR (Complementary split ring resonator)을 안테나의 그라운드면에 식각하였으며 패치안테나의 모서리 부분을 절삭하여 원편파 특성을 얻었다. 패치안테나의 공진주파수는 CSRR의 크기와 위치에 의해 달라지며 시뮬레이션과 측정을 통하여 원편파 특성을 확인하였다. 측정결과 송신과 수신 주파수대역에서 약 0.2dB와 1.5dB의 이득을 얻었다.

• Journal of electromagnetic engineering and science
• /
• 제5권2호
• /
• pp.97-103
• /
• 2005

This paper describes the measured results of sonobuoy transmitting antenna system for anti-submarine warfare (ASW). Since radiation pattern and power density depend on impedance matching between transmitting RF part and antenna with termination resistance, design of matching circuit is very important for sonobuoy system performance. Matching circuit is designed by Smith chart using control of L and C. In standing wave ratio(SWR) measurement using Network Analyzer, SWR of antenna with matching circuit observed 1.5 below at the assigned VHF band. It shows very excellent performance comparison with conversional product that is used for the same object. The measured vertical and horizontal radiation patterns are also shown the satisfaction of military specifications. A drop out of sonobuoy system on the sea is happened when angle of elevation direction is over 10 degrees, and it is conformed that it takes less than I second return to original signal level. The required electric power density is $83\;mW/m^2$ in the military specification, and measured electric power density is observed over average $110\;mW/m^2$ at all frequency bands.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.723-726
• /
• 2002

This paper describes the design, fabrication, and measurement of a sequential-rotation microstrip-array antenna for the Electronic Toll Collection System (ETCS). The ETCS is made possible by using roadside equipment with radiation pattern that can accurately pinpoint the designated communication area, without interference from other lanes. The sequential-rotation microstrip-array antenna was applied to the absorber to reduce the side lobe level (SLL). Results showed that the antenna yields a return loss at a center frequency of -20.675 dB, an axial ratio of 1.15 dB, and a gain of 20.26 dBi.

• 한국콘텐츠학회논문지
• /
• 제4권2호
• /
• pp.28-35
• /
• 2004

안테나 복사 특성을 효율적으로 측정할 수 있는 근역장측정 방법의 개선을 논한다. 본 논문에서 직각좌표계에 바탕을 둔 원통주사법의 공식을 제안한다. 제안된 원통주사법 알고리즘을 미소 쌍극자 안테나의 정확한 해와 비교한다. 본 논문의 접근법이 대부분의 안테나 측정에 효과적임을 수치해석 결과에서 알 수 있다.