• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.11 no.4
• /
• pp.223-228
• /
• 2011

In this paper, a novel range-free localization algorithm for anisotropic networks is proposed. In the proposed method, the characteristics of the given network are considered and each sensor node estimates the relation between the hop counts and the geographical distances. Unlike most of the previous localization algorithms, the proposed method performs well not only in the isotropic network but also in the anisotropic networks. The proposed method is applied to both isotropic and anisotropic network topologies and the simulation results demonstrate that the method exhibits excellent and robust performances.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.1
• /
• pp.33-42
• /
• 2013

This paper presents a multihop range-free localization algorithm to estimate the physical location of a normal node with local connectivity information in anisotropic sensor networks. In the proposed algorithm, a normal node captures the detour degree of the shortest path connecting an anchor pair and itself by comparing the measured hop count and the expected hop count, and the node estimates the distances to the anchors based on the detour degree. The normal node repeats this procedure with all anchor combinations and pinpoints its location using the obtained distance estimates. The proposed algorithm requires fewer anchors and less communication overhead compared to existing range-free algorithms. We showed the superiority of the proposed algorithm over existing range-free algorithms through MATLA simulations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.7B
• /
• pp.595-605
• /
• 2012

DV-Hop is one of the well known range-free localization algorithms. The algorithm works well in case of isotropic network since the sensor and anchor nodes are placed in the entire area. However, it results in large errors in case of anisotropic networks where the hop count between nodes is not linearly proportional to the Euclidean distance between them. Hence, we proposed a novel range-free algorithm for anisotropic networks to improve the localization accuracy. In the paper, the Euclidean distance between anchor node and unknown node is estimated by the average hop distance calculated at each hop count with hop count and distance information between anchor nodes. By estimating the unknown location of nodes with the estimated distance estimated by the average hop distance calculated at each hop, the localization accuracy is improved. Simulation results show that the proposed algorithm has more accuracy than DV-Hop.

• Journal of Communications and Networks
• /
• v.18 no.5
• /
• pp.796-805
• /
• 2016

In many wireless sensor network (WSN) applications, the information transmitted by an individual entity or node is of limited use without the knowledge of its location. Research in node localization is mostly geared towards multi-hop range-free localization algorithms to achieve accuracy by minimizing localization errors between the node's actual and estimated position. The existing localization algorithms are focused on improving localization accuracy without considering efficiency in terms of energy costs and algorithm convergence time. In this work, we show that our proposed localization scheme, called DV-maxHop, can achieve good accuracy and efficiency. We formulate the multi-objective optimization functions to minimize localization errors as well as the number of transmission during localization phase. We evaluate the performance of our scheme using extensive simulation on several anisotropic and isotropic topologies. Our scheme can achieve dual objective of accuracy and efficiency for various scenarios. Furthermore, the recently proposed algorithms require random uniform distribution of anchors. We also utilized our proposed scheme to compare and study some practical anchor distribution schemes.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.4
• /
• pp.563-570
• /
• 1990

A silicon pressure sensor made of a full bridge of diffused resistors was designed and fabricated using semiconductor integrated circuit process. Thin diaphragms with 30\ulcorner thickness were obtained using anisotropic wet chemical etching technique. Our device showed strong temperature dependence. Compensation networks are used to compensate for the temperature dependence of the pressure sensor. The bridge supply voltage having positive temperature coefficient by compensation networks was utilized against the negative temperature coefficient of bridge output voltage. The sensitivity fluctuation of pressure sensor before temperature compensation was -1700 ppm/\ulcorner, while it reduced to -710ppm\ulcorner with temperature compensation. Our result shows that the we could develop accurate and reliable pressure sensor over a wide temperature range(-20\ulcorner~50\ulcorner).

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.34-37
• /
• 2002

Freestanding azobenzene-containing liquidcrystalline network (LCN) films. with macroscopic uniaxial molecular alignment were prepared by insitu photopolymerization. By polarizing microscopy, fiber-like structures aligned in one direction were observed. Furthermore, with a confocal laser scanning microscope (CLSM), it was confirmed that the fiber-like structures were formed even in the bulk of the LCNs. Upon UV light irradiation to cause trans-cis photoisomerization of the azobenzene molecules, the LCNfilms underwent a significant and anisotropic bending toward the irradiation direction of UV light. When the bent LCNfilms were exposed to Vis light, unbending of the LCN films immediately took place and the initial flat LCN films were restored. This bending and unbending behavior of the LCN films could be repeated just by changing the wavelength of the irradiation light. It was suggested that the bending was induced by an absorption gradient which produced a volume difference between the front surface area and the bulk of the network films.

• Journal of the Korean Ceramic Society
• /
• v.36 no.8
• /
• pp.843-847
• /
• 1999

The dc resistivity dc magnetization and thermopower of layered perovskite La1.6Ca1.4Mn2O7.07 have been studied. The ceramic sample of La1.6Ca1.4Mn2O7.07 undergoes the metal-insulator transition at 120K while a first-order phase transition from a ferromagnetic phase to a paramagnetic phae is observed at 260 K=TC This behavior is quite different from that of the well-known double exchange ferromagnets such as La1-xCaxMnO3 This phenomenon could be understood by considering the effects of the anisotropic double exchange interaction caused by two dimensional Mn-O-Mn networks in this materials. The dc magnetization between 120K and 250K is nearly constant and decreases rapidly with increasing temperature above 250K The measurements of dc resistivity and thermopower indicate that Zener polaron hopping conduction takes place above 260 K.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.555-558
• /
• 2000

Layered perovskite La$_{2-x}$Ca$_{l-x}$Mn$_2$O$_{7}$ phases were synthesized by solid state reaction. Single phase R-P could be obtained in the range of 0.4$_{2-x}$Ca$_{l-x}$Mn$_2$O$_{7}$. About 30% of MR ratio was obtained at 270K when 5 T of magnetic field was applied.ied.ied.ied.

• Korean Journal of Optics and Photonics
• /
• v.21 no.2
• /
• pp.69-73
• /
• 2010

We propose a method to enhance the response time of a twisted nematic liquid crystal (TN-LC) cell using an anisotropic polymer. Polymer networks are formed by the phase separation between a LC and a UV-curable polymer. A TN-LC cell is exposed to UV light after the mixture of LC and anisotropic polymer is injected into the TN-LC cell. As a result, turn-off time of a TN-LC cell can be decreased remarkably without any loss of the transmittance. The turn-off time of a TN-LC cell with pure LC was 16 ms, but those of polymer networked TN-LC cells were 12, 11, and 9 ms when the concentration of the polymer was 3, 5, and 10 wt%, respectively. Moreover, by virtue of the polymer network, the backflow effect and the delay time generated during the turn-off process disappeared.

• Polymer(Korea)
• /
• v.28 no.1
• /
• pp.41-50
• /
• 2004

A new hydroxypropyl chitosan capable of forming a thermotropic liquid crystalline phase and two kinds of derivatives based on the hydroxypropyl chitosan (6-cholesteryloxycarbonylpentoxypropyl) chitosans (CHPCTs) and acrylic acid esters of CHPCT (CHPCTEs) were synthesized. The crosslinked films with liquid crystalline order were also prepared by photocrosslinking CHPCTE in mesophase. The liquid crystalline properties for all the samples and the swelling behavior of the crosslinked samples in acetone were investigated. In contrast with the hydroxypropyl chitosan, all the uncrosslinked cholesteryl-bearing samples farmed monotropic cholesteric phases with left-handed helicoidal structures and exhibited reflection colors over the full cholesteric range. This is the first report of a thermotropic cholesteric liquid crystalline chitosan derivative with reflection bands in the visible region. Both the optical pitches (λ$\_$m/'S) of CHPCT and CHPCTE decrease with temperature or with cholesteryl content at a given temperature. However, the λ$\_$m/ of CHPCT was larger than that of CHPCTE at the same temperature and at the same cholesteryl content. All the crosslinked samples did not display reflection colors, indicating that the cholesteric structure of CHPCTE significantly changes upon crosslinking. The two-dimentional anisotropic swelling characteristic of liquid crystalline networks was observed for all the crosslinked samples.