• 한국분말재료학회지
• /
• 제18권5호
• /
• pp.443-448
• /
• 2011

The HDDR(hydrogenation-disproportionation-desorption-recombination) process can be used as an effective way of converting no coercivity Nd-Fe-B material, with a coarse $Nd_2Fe_{14}B$ grain structure to a highly coercive one with a fine grain. Careful control of the HDDR process can lead to an anisotropic $Nd_2Fe_{14}B$ without any post aligning process. In this study, the effect of hydrogen gas input at various temperature in range of $200{\sim}500^{\circ}C$ of hydrogenation stage (named Modified-solid HDDR, MS-HDDR) on the magnetic properties has been investigated. The powder from the modified-solid HDDR process exhibits Br of 11.7 kG and iHc of 10.7 kOe, which are superior to those of the powder prepared using the normal HDDR process.

• Fibers and Polymers
• /
• 제1권2호
• /
• pp.97-102
• /
• 2000

Pitch precursors were synthesized from coal tar(CT) and pyrolysis fuel oil(PFO, petroleum residue oil) at relatively low temperature of $250^{\circ}$, in the presence of horontrifluorideidiethyletherate complex(BFDE) as a catalyst and nitrobenzene(NB) as a co-catalyst. The softening point, nitrogen content and carbon yield increased with an increase of concentration of NB. The pitch precursors with good spinnability were prepared by removing the volatile components through $N_2$ blowing. The precursor pitches were spun through a circular nozzle, stabilized at $310^{\circ}$ and finally carbonized at $1000^{\circ}$. The optically anisotropic structure formed at the absence of NB was changed into isotropic structure, showing a decrease in size of the flow domain. The hollow carbon fiber could be prepared in the process of stabilization. The results proposed that the morphology of carbon materials could be controlled by changing the concentration of catalyst and/or co-catalyst and/or stabilization condition that affect on the mobility of molecules during carbonization.

• Computers and Concrete
• /
• 제19권2호
• /
• pp.211-216
• /
• 2017

Crack on concrete surface allows more rapid penetration of chlorides. Crack width and depth are dominant parameters for chloride behavior, however their effects on chloride penetration are difficult to quantify. In the present work, the previous anisotropic (1-D) model on chloride diffusion in concrete with single crack is improved considering crack shape and roughness. In the previous model, parallel-piped shape was adopted for crack shape in steady-state condition. The previous model with single crack is improved considering wedge shape of crack profile and roughness. For verifying the proposed model, concrete samples for nuclear power plant are prepared and various crack widths are induced 0.0 to 1.2 mm. The chloride diffusion coefficients in steady-state condition are evaluated and compared with simulation results. The proposed model which can handle crack shape and roughness factor is evaluated to decrease chloride diffusion and can provide more reasonable results due to reduced area of crack profile. The roughness effect on diffusion is evaluated to be 10-20% of reduction in chloride diffusion.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권4호
• /
• pp.377-384
• /
• 2007

A backscatter Kikuchi diffraction attachment to an SEM enables the convenient investigation of grain orientations on bulk or micro surface. Their relation to micro structural features gives insight into many aspects of anisotropic materials properties. In micro area such as Micro Electro Mechanical Systems(MEMS) devices is required in order to improve understanding of how they may be expected to perform upon the micro scale. Electro Back Scatter Diffraction (EBSD) helps us to find uniform area as MEMS material. The ${\gamma}-TiAl$ has two different lamellar structures ${\gamma}/{\alpha}2-Ti_3Al$ phase which have shows $\{111\}{\gamma}//\{0001\}{\alpha}2$ plane indexing. The micro size testing specimen was successfully made by this structural relation. Interlamellar structure specimen averagely show $20{\sim}25%$ lower fracture toughness value compare with translamellar specimens Moreover micro fracture surface and micro crack progress were observed.

• 한국생산제조학회지
• /
• 제20권3호
• /
• pp.219-224
• /
• 2011

Aluminum or CFRP is representative one of the lightweight materials. Collapse behavior of Al/CFRP square structural member was evaluated in this study based on the respective collapse behavior of aluminum and CFRP member. Al/CFRP square structural members were manufactured by wrapping CFRP prepreg sheets outside the aluminum hollow members in the autoclave. Because the CFRP is an anisotropic material with mechanical properties, The Al/CFRP square structural members stacked at different angles(${\pm}15^{\circ}$, ${\pm}45^{\circ}$, ${\pm}90^{\circ}$, $90^{\circ}/0^{\circ}$ and $0^{\circ}/90^{\circ}$ where the direction on $0^{\circ}$ coincides with the axis of the member) and interface numbers(2, 3, 4, 6 and 7). The axial impact collapse tests were carried out for each section members. Collapse mode and energy absorption characteristics of the each member were analyzed.

• 한국음향학회지
• /
• 제20권1호
• /
• pp.62-67
• /
• 2001

직선집속 PVDF 초음파 트랜스듀서를 이용하여 누설탄성표면파 (Leaky Surface Acoustic Wave: LSAW)의 전파속도를 측정하고, 그 결과를 이론해석 결과와 비교하였다. 시료로는 등방성 재료인 구리, 알루미늄 및 용융석영, 이방성 재료인 Z-cut α/sup-/수정을 사용하였다. 측정방법으로는 초점면에 위치한 시료를 트랜스듀서 쪽으로 접근시켰을 때 LSAW가 트랜스듀서의 중심축을 통과한 후 시료표면에서 직접 반사되어오는 종파와 분리되어지는 현상을 이용하였다. 음속의 측정결과는 이론 해석결과와 오차 1％이내에서 잘 일치하였으며,α/sup-/수정의 (0,0,1)면에서는 LSAW 외에 의사누설탄성표면파 (Leaky Pseudo Surface Acoustic Wave : LPSAW)가 전형적인 6-fold 이방성을 가지고 전파됨을 알 수 있었다.

• 한국게임학회 논문지
• /
• 제10권3호
• /
• pp.103-111
• /
• 2010

본 논문에서는 직물을 사실적으로 렌더링할 수 있는 절차적 접근법을 제안한다. 가상 직물을 렌더링하기 위한 기존의 절차적인 기법들은 결과의 사실성이 부족하다는 문제점이 있다. 이를 해결하기 위해 제안된 예제-기반 접근법은 렌더링의 사실성을 매우 높였지만, 다양한 재질의 반사를 표현하기 위해서는 대용량의 저장 공간이 필요하다는 단점을 가진다. 본 논문에서 제안되는 기법은 미세면(microfacet) 모델을 이용하여 직물을 표현한다. 미세면 모델은 이방성 반사특성을 갖도록 하였으며, 씨실과 날실은 이러한 이방성 반사 특성을 수직으로 교차하여 표현할 수 있다. 이와 함께 본 논문은 실을 더욱 사실적으로 표현하기 위해 직조물을 구성하는 실의 굴곡을 절차적으로 모델링하는 기법을 제안한다. 제안된 기법은 데이터를 사용하지 않고도 매우 사실적인 직물 렌더링이 가능하다.

• E2M - 전기 전자와 첨단 소재
• /
• 제3권4호
• /
• pp.306-314
• /
• 1990

SrO-5.7Fe$_{2}$O$_{3}$의 Magnetoplumbite형 Sr페라이트에 첨가제 SiO$_{2}$, H$_{3}$BO$_{3}$CaCO$_{3}$, SrCO$_{3}$을 0.1-0.1wt%로 변화시켜 만든 등방성과 이방성의 자기이력곡선, 밀도, 감자곡선, 고유보자력 및 미세구조특성에 미치는 영향을 조사하였다. 위 첨가제는 페라이트 생성 및 특성개선에 효과적이었도 특히 등방성에서의 입도크기를 3.5.mu.m에서 1.7.mu.m로 하였을때 소결온도가 40.deg.C 낮은 1220.deg.C에서 잔류자속밀도가 2300G, 보자력이 1950Oe, 밀도가 4.51g/Cm$^{3}$, 교유보자력이 3500Oe로 각각 증가하였다. 이방성은 등방성 보다 원등히 우수하였고 최대에너지적 (BH)$_{max}$이 소결온도가 10.deg.C 낮은 1210.deg.C에서 1.13으로 부터 3.3MGOe로 증가하였다. 이값은 이론치의 61%에 도달하고 있다.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권5호
• /
• pp.572-579
• /
• 1995

Most of conventional ultrasonic transducers are constructed to generate either longitudinal or shear waves, but not both of them. We investigate the mechanism of dual mode transducers that generate both of the longitudinal and shear waves simultaneously with single PZT element. The study is aimed to find the optimally desired cut by examining the anisotropic piezoelectric properties. Theory predicts that a mixed P/S mode transducer can be constructed using a rotated Z-cut of PZT piezoelectric ceramics. We study the performance of a PZT element as a function of its rotation angle so that its efficiency is optimized to excite the two waves as much as equally strong. The results are verified by the waveform in pulse-echo computer simulation and experiments. When the transducer is subjected to impedance analysis, it shows two thickness mode resonances, each of which being a mixed P/S thickness mode. By examining wave speeds on E transmitter delay line receiver setup, it is confirmed that the transducer can transmit and detect both longitudinal and shear wave simultaneously.

• 한국도로학회논문집
• /
• 제11권1호
• /
• pp.195-201
• /
• 2009

이 논문에서는 다층탄성해석과 유한요소법을 사용하여 도로설계를 위한 도로내 주요 변형률을 계산하여 유사한 결과치를 양산하는 경우를 비교 분석하였다. 비록 유한요소법이 보다 나은 모델이라는 것이 입증되긴 했지만, 다층탄성해석 프로그램이 간편성으로 인해 여전히 도로설계를 위해 많이 사용되어 지고 있으므로 다층탄성해석 프로그램을 사용한 주요 변형률의 예측이 시급한 실정이다. 이 연구에서는 KENLAYER프로그램을 사용하여, 비선형 이방성 기층거동을 고려한 유한요소법을 사용했을 때 얻어지는 도로내 주요 변형을 예측할 수 있는 분석기법이 소개된다.