• Water Engineering Research
• /
• 제2권2호
• /
• pp.123-138
• /
• 2001

An injection experiment was carried ut to investigate the pressure domain within which hydromechanical coupling influences considerably the hydrologic behavior of a granite rock mass. The resulting database is used for testing a numerical model dedicated to the analysis of such hydromechanical interactions. These measurements were performed in an open hole section, isolated from shallower zones by a packer set at a depth of 275 m and extending down to 840 m. They consisted in a series of flow meter injection tests, at increasing injection rates. Field results showed that conductive fractures from a dynamic and interdependent network, that individual fracture zones could not be adequately modeled as independent systems, that new fluid intakes zones appeared when pore pressure exceeded the minimum principal stress magnitude in that well, and that pore pressures much larger than this minimum stress could be further supported by the circulated fractures. These characteristics give rise to the question of the influence of the morphology of the natural fracture network in a rock mass under anisotropic stress conditions on the effects of hydromechanical couplings.

• 한국정밀공학회지
• /
• 제18권1호
• /
• pp.89-97
• /
• 2001

A microgyroscope, which vibrates in two orthogonal axes on the substrate plane, is designed and fabricated. The shuttle mass of the vibrating gyroscope consists of two parts. The one is outer shuttle mass which vibrates in driving mode guided by four folded springs attached to anchors. And the other is inner shuttle mass which vibrates in driving mode as the outer frame does and also can vibrate in sensing mode guided by four folded springs attached to the outer shuttle mass. Due to the directions of vibrating mode, it is possible to fabricate the gyroscope with simplified process by using polysilicon on insulator structure. Fabrication processes of the microgyroscope are composed of anisotropic silicon etching by RIE, gas-phase etching (GPE) of the buried sacrificial oxide layer, metal electrode formation. An eletromechanical model of the vibrating microgyroscope was modeled and bandwidth characteristics of the gyroscope operates at DC 4V and AC 0.1V in a vacuum chamber of 100mtorr. The detection circuit consists of a discrete sense amplifier and a noise canceling circuit. Using the evaluated electromechanical model, an operating condition for high performance of the gyroscope is obtained.

• 천문학회보
• /
• 제39권2호
• /
• pp.76.2-76.2
• /
• 2014

The Arches cluster is one of the compact, young, massive star clusters near the center of our galaxy. Since it is located only ~30 pc away in projection from the galactic center (GC), the cluster is an excellent target for studying the effects of star forming environment on, for example, the initial mass function under the extreme condition of GC. To estimate the initial condition of the Arches cluster, we compare our calculation results from the anisotropic Fokker-Planck method with the most recent observational data sets for the surface density and velocity dispersion profiles and the present-day mass function.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 정기총회 및 추계학술대회 논문집 학회본부
• /
• pp.192-194
• /
• 1993

In this paper, a silicon piezoresistive accelerometer of which the cantilevers have uniform thickness is designed and fabricated with SOI wafer. The accelerometer consists of a seismic mass and four cantilevers, and is fabricated mainly by the anisotropic etching method using EPW etchant. The fabrication processes are that of the frontside processes including the etching of the cantilevers and the doubleside alignment holes, the diffusion of the piezoresisters and patterning of the contact windows, and the metal connection process, and that of the backside processes including the etching of the shallow cavity and the seismic mass. Because of the uniformity of thickness, the performance of the accelerometer fabricated with SOI wafer is expected to be better than that of accelerometer fabricated by the time-controlled etching method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 추계학술대회 논문집 학회본부
• /
• pp.416-418
• /
• 1994

In this study, a silicon piezoresistive accelerometer is designed and fabricated using $p^+$ etch stop layer. The accelerometer consists of a seismic mass and tour cantilevers, and is fabricated mainly by the anisotropic etching method using EPW as an etchant. Eight piezoresistors are properly arranged and connected to make a bridge circuit so that acceleration in only one direction may be measured. The etch stop method is adequate to the mass-production and the precise thickness control of the diaphragms as well, whet compared with the electrochemecal etch stop method.

• 터널과지하공간
• /
• 제13권6호
• /
• pp.465-475
• /
• 2003

본 논문은 지하공동이 건설되는 지역을 대상으로 공동내 지하수 유입량을 계산하기 위하여 영국의 AEA Technology에서 개발한 NAPSAC과 NAMMU를 이용하여 수치 모델링을 실시하였다. 이것은 3차원의 파쇄된 매질에서 지하수 유동에 대하여 아주 유효한 유한요소 소프트웨어 패키지이다. 모델링에 사용된 입력자료는 지표조사, 시추조사, 단일공 수리시험 자료 등을 이용하여 산출하였다. 공동내 지하수 유입량을 보다 정확히 산출하기 위하여 이방성 수리전도도를 고려하였으며 이방성 수리전도도값은 연구지역에 분포하는 균열체계의 확률적 분포특성이 반영된 균열망에서 역산되었다. 연속체 개념의 수치모델링을 통하여 평수기, 갈수기와 풍수기시의 지하 공동내 유입량, 유동시간, 유동경로의 변화를 계산하였다.

• 대한기계학회논문집A
• /
• 제20권2호
• /
• pp.408-413
• /
• 1996

A self-diagnostic, air-damped, piezoresitive, cantilever-beam microaccelerometer has been designed, fabricated and tested for applications to automotive electronic airbag systems. A skew-symmetric proof-mass has been designed for self-diagnostic capability and zero transverse sensitivity. Two kinds of multi-step anisotropic etching processes are developed for beam thickness control and fillet-rounding formation, UV-curing paste has been used for sillicon-to-glass bounding. The resonant frequency of 2.07kHz has been measured from the fabricated devices. The sensitivity of 195 $\mu{V}$/g is obtained with a nonlinearity of 4% over $\pm$50g ranges. Flat amplitude response and frequency-proportional phase response have been obserbed, It is shown that the design and fabricaiton methods developed in the present study yield a simple, practical and effective mean for improving the performance, reliability as well as the reproducibility of the accelerometers.

• 비파괴검사학회지
• /
• 제21권3호
• /
• pp.269-276
• /
• 2001

복합재료의 초음파검사는 매직의 탄성이방성으로 인해 빔스큐(beam skew)현상 등이 발생하기 때문에 등방성 재료의 검사에 비해 훨씬 어렵다. 그 동안의 많은 연구의 결과로서 이방성 재료 네 탄성파의 전파 현상에 대한 해석해법이 정립되어 있으나, 그 해석해가 매우 복잡하여 실제 문제의 해를 구하기 위해서는 수치적인 방법에 의존하여야 하는 경우가 많다. 본 연구에서는 횡등방 이방성(transversely isotropic)으로 가정할 수 있는 단일방향 섬유 복합재료 내 점원에 의한 초음파 전파의 해석해를 먼저 구하고, 이러한 복합재료를 질량-스프링 모델로 모델링하여 해석해에 상응하는 수치해를 구하였다. 그 결과, 초음파의 전파에 대한 수치해와 해석해가 매우 잘 일치하는 것을 확인하였다. 동일한 수치해석법을 사용하여 초음파가 복합재료의 자유표면에서 반사되는 현상과 균일에 의해 산란되는 현상에 대한 수치해도 구하였으며 그 결과를 파동역학의 관점에서 고찰하였다. 본 연구에서 그 유효성이 확인된 수치 모델은 복합재료의 초음파검사를 시뮬레이션 함에 있어 매우 유용하게 사용될 수 있을 것이다.

• 천문학회보
• /
• 제40권1호
• /
• pp.43.3-44
• /
• 2015

We analyze the clustering of large scale structure in the Universe in a model independent method, accounting for anisotropic effects along and transverse to the line of sight. A large sample of 690,000 galaxies from The Baryon Oscillation Spectroscopy Survey Data Release 11 are used to determine the Hubble expansion H, angular distance D_A, and growth rate GT at an effective redshift of z=0.57. After careful bias and convergence studies of the effects from small scale clustering, we find that cutting transverse separations below 40 Mpc/h delivers robust results while smaller scale data leads to a bias due to unmodelled nonlinear and velocity effects. The converged results are in agreement with concordance LCDM cosmology, general relativity, and minimal neutrino mass, all within the $68{\backslash}%$ confidence level. We also present results separately for the northern and southern hemisphere sky, finding a slight tension in the growth rate -- potentially a signature of anisotropic stress, or just covariance with small scale velocities -- but within $68{\backslash}%$ CL.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.255-261
• /
• 2003

Tunnelling in poor and heterogeneous ground is a difficult task. Even with a good geological investigation, uncertainties with respect to the local rock mass structure will remain. Especially for such conditions, a reliable short-term prediction of the conditions ahead and outside the tunnel profile are of paramount importance for the choice of appropriate excavation and support methods. The information contained in the absolute displacement monitoring data allows a comprehensive evaluation of the displacements and the determination of the behaviour and influence of an anisotropic rock mass. Case histories and with numerical simulations show, that changes in the displacement vector orientation can indicate changing rock mass conditions ahead of the tunnel face (Schubert & Budil 1995, Steindorfer & Schubert 1997). Further research has been conducted to quantify the influence of weak zones on stresses and displacements (Grossauer 2001). Sellner (2000) developed software, which allows predicting displacements (GeoFit$\circledR$). The function parameters describe the time and advance dependent deformation of a tunnel. Routinely applying this method at each measuring section allows determining trends of those parameters. It shows, that the trends of parameter sets indicate changes in the stiffness of the rock mass outside the tunnel in a similar way, as the displacement vector orientation does. Three-dimensional Finite Element simulations of different weakness zone properties, thicknesses, and orientations relative to the tunnel axis were carried out and the function parameters evaluated from the results. The results are compared to monitoring results from alpine tunnels in heterogeneous rock. The good qualitative correlation between trends observed on site and numerical results gives hope that by a routine determination of the function parameters during excavation the prediction of rock mass conditions ahead of the tunnel face can be improved. Implementing the rules developed from experience and simulations into the monitoring data evaluation program allows to automatically issuing information on the expected rock mass quality ahead of the tunnel.