• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.186-186
• /
• 2009

Most liquid crystal display modes, including the twisted nematic (TN) $mode^1$, the in-plane switching (IPS) $mode^2$, the fringe field switching (FFS) $mode^3$, and the vertically aligned (VA) $mode^4$ are based on either a horizontal or a vertical alignment. However, for some applications, such as no-bias-bend (NBB) pi cell or bistable bend-splay display, an intermediate pretilt angle is essential$^5$. NBB pi cells have been a focus of interest because of their fast response time; however, the reliable control of the intermediate pretilt angle of liquid crystals that is required for the fabrication of NBB pi cells is challenging. The controllable pre-tilt angle of liquid crystals was investigated using a blend of horizontal and vertical polyimide prepared by a rubbing method. Various pretilt angles in the range from 0^{\circ}$ to 90^{\circ}$ were achieved as a function of the vertical polyimide content. We observed uniform liquid crystal alignment on the rubbing-treated blended polyimide layer. A NBB pi cell with an intermediate pretilt angle of 47.8^{\circ}$ was manufactured. This cell had no initial bias voltage and a low threshold voltage, which indicates that it has low power consumption. In addition, the response time of the NBB pi cell was rapid.

• 한국의류학회지
• /
• 제23권3호
• /
• pp.353-360
• /
• 1999

An investigation made of the variations of angle of bias on the top of the sleeve cap curve line and calculated easing contraction ratio by capheights(A ; a,h$\times$5,/6) B: A, H/4 +4cm C:A.H/3 D: A.H/ 4+3cm E:AH/4+2cm, F: A,H/4+1cm, G: A,H/4, H:A,H/6, I:A,H/8) and the efects of easing contraction on the cap curve lines of sleeve A, D, G by easing stitch density with the gathering foot: sewing condition-lockstitch industrial machine stitch density(N1.0 ; 38stitches/3cm N1.5: 26stitches/3cm, N2.0 ; 19stitches/3cm, N2.5 ; 14stitches/ 3cm) The results obtained were as follows; 1) The variations of the angle of bias on the top of the sleeve cap curve line by cap heights can be done according to the angle balance (front; $\alpha$-$\beta$ back ; $\alpha$'- $\beta$') between the angle (front ;$\alpha$, $\beta$, back ; $\alpha$'- $\beta$') of bias of the two base-lines. 2) The higher cap height the more higher the calculated easing contraction ratio. 3) The lower the stitch density the higher easing contraction ratio. 4) The effects of easing contraction was that sleeve G was more than sleeve A, D.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 추계학술발표대회 논문집
• /
• pp.99-102
• /
• 2003

This paper aims to observe the micro-mechanical behaviour of tow geometry during deformation of dry woven carbon-fiber fabric. With the increment of shear angle fabric experiences 'lock-up'phenomenon. In this paper, deformation of micro-mechanical parameters such as tow interval, change in tow amplitude and wavelength are investigated. To observe the micro-deformation of the fabric structure, appropriate specimens from bias extension and biaxial tests are sectioned and observed under the microscope. It was found that different loading conditions cause geometric deferences in the tow architecture.

• 한국의상디자인학회지
• /
• 제8권1호
• /
• pp.69-79
• /
• 2006

The purpose of this study is to find the proper width of fabric which can bring high efficiency on productivity. We focus on the marking method by comparing and analyzing the marking efficiency of A-line skirt. This study employs 4 criteria to mark the A-line skirt, which are cutting method, angle, width, and direction, respectively. There can be 2 different cutting methods(fold pattern and add seam pattern at the front and back center line), and 2 different angles(warp angle and bias angle). Also, width of the fabric can be classified into 2 groups(110cm, 150cm), and marking direction can be grouped into 2(one direction marker and one direction per each size marker). These 4 criteria make 16($2^*2^*2^*2$) cases for this study. Main findings are follows. First, the skirt with folded at the center line had higher efficiency rate than the skirt with add seam at the center line. Second, the skirt with the 150cm width has higher efficiency rate than that of 110cm. Third, fixing the warp angle has higher efficiency rate than that of fixing the bias angle at the front and back center line. Finally, one direction per each size marker has much higher efficiency than the one direction marker.

• Korean Chemical Engineering Research
• /
• 제44권5호
• /
• pp.498-504
• /
• 2006

고밀도 $CHF_3$ 플라즈마를 이용한 식각에서 photoresist(PR)의 식각속도 및 $SiO_2$의 PR에 대한 식각 선택도가 이온의 입사 각도에 따라 변화하는 특성을 관찰하였다. 플라즈마 내에 파라데이 상자를 설치하여 이온의 입사 각도를 조절하였으며, 바이어스 전압을 변화시켜 이온의 입사 에너지를 조절하였다. 대부분의 바이어스 전압에서 $SiO_2$의 식각속도는 이온입사각도가 증가함에 따라 단조 감소함에 비해 PR의 식각속도는 중간각도 영역까지 일정하다가 그 이후에 감소하기 시작하였다. 이온입사각도가 $0^{\circ}$인 조건에서의 식각속도를 기준으로 정규화된 식각속도(NER)는 $SiO_2$의 경우 cosine함수와 거의 일치하였으나 PR의 경우 중간각도영역에서 over-cosine 형태를 보였다. PR에 대한 $SiO_2$의 식각선택도는 이온입사각도에 따라 점차로 감소하였는데, 이는 PR이 $SiO_2$에 비해 중간각도에서 물리적 스퍼터링에 의해 식각 수율이 크게 증가하였기 때문이다. 또한, 바이어스 전압의 증가에 따라 PR에 대한 식각선택도는 대부분의 이온입사각도에서 감소하였다.

• 복식문화연구
• /
• 제20권4호
• /
• pp.594-603
• /
• 2012

This study aimed to investigate a bias pattern making method with geometrical approach. The bias-cut dress has soft silhouette of drape in the garment. However, the bias cut dress has problem of satisfying the intended garment size spec. This problem occurs from various sources. The main reason is that the bias-cut fabric tends to stretch on longitudinal direction and to shrink horizontal direction when it was hung on the body. The goal of this study was to develop a bias-cut dress pattern making method satisfying the intended garment size spec. The researchers developed the geometrical method of measuring dimensional change by calculating the compensation ratio of the fabric in true bias direction. The compensation ratio was calculated by applying draping ratio of the fabric. Three types of fabrics were used in the experiment. The warp and weft crossing angle of fabric was ranged from $78^{\circ}$ to $82^{\circ}$. The fabrics stretched longitudinally 6.9~9.9% and shrank horizontally 7.2~11.0%. The compensation ratio of the bias-cut pattern for sample dress was calculated for each fabric type. Two types of experimental bias-cut dress patterns were developed for each fabric. One pattern was made with applying full compensation ratio and the other one made with applying partial ratio of the fabric. Experimental dresses were made with these patterns. The results of the evaluation showed that the bias-cut dress pattern applying the partial compensation ratio was more appropriate than the pattern applying the full compensation ratio.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 디스플레이 광소자분야
• /
• pp.136-139
• /
• 2003

We studied the nematic liquid crystal (NLC) aligning capabilities using the new alignment material of a-C:H thin film as working gas at 30W rf bias condition. A high pretilt angle of about $5^{\circ}$ by ion beam(IB) exposure on the a-C:H thin film surface was measured. A good LC alignment by the IB alignment method on the a-C:H thin film surface was observed at annealing temperature of $250^{\circ}C$, and the alignment defect of the NLC was observed above annealing temperature of $300^{\circ}C$. Consequently, the high LC pretilt angle and the good thermal stability of LC alignment by the IB alignment method on the a-C:H thin film surface as working gas at 30W rf bias condition can be achieved.

• Composites Research
• /
• 제17권1호
• /
• pp.38-46
• /
• 2004

본 논문의 목적은 탄소섬유 건직물의 토우 구조의 미소 거동과 변형 중의 평면 하중과의 관계를 규명하는 것이다. 평면 하중은 변형 중에 토우들을 재배치하며, 결국에는 잠김 현상을 유발하게 된다. 본 논문에서는 토우 간격, 주름각등의 미소 변형 변수들을 관찰하기 위해 일방향 편향 인장실험과 이축 인장실험을 겪은 시편들을 전단각에 따라 분류하여 현미경을 이용하여 변형 경향을 관찰하였다. 전단각에 따른 변형된 토우 구조의 변화를 간단한 설계 변수 모델을 이용하여 근사하였다.

• Composites Research
• /
• 제23권5호
• /
• pp.8-14
• /
• 2010

서로 다른 길이비를 갖는 세 종류의 유리 직물 복합재료(평직, 균형능직, 비균형능직)의 면내 전단 물성 평가를 위해 편향인장 시험을 실시하였다. 직물 복합재료의 전단각을 결정하기 위하여 인장 변형량과 직물의 크기에 기인한 이론식, 직접측정법 및 이미지 분석법등을 이용하여 서로의 장단점을 비교하여 보았으며, 편향 인장 시험의 기하구조를 이용하여 유도된 식을 통해 면내 전단력을 계산하였다. 또한 트렐리스 시험(trellis-frame test)에 의한 결과와의 비교를 통해 편향 인장 시험에 의한 전단 물성 측정법의 정확도를 평가하였다. 실험 결과, 이론식에 의한 전단각 계산법은 전단각이 30도 이내일 경우에 이미지를 통한 직접 측정의 결과와 유사하였으며, 면내 전단력은 평직이나 균형 능직과 같은 등방형 직물의 경우에만 측정 샘플의 길이비에 무관한 균일한 결과를 보였다. 또한 편향 인장 시험과 트렐리스 시험 모두 비등방성이 큰 직물에 대한 전단 평가를 수행하는 데 있어서 많은 편차를 나타내었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.679-682
• /
• 2006

By adjusting driving voltage, the image quality and optical characteristics have been improved. Based on the experiment results. Optical properties including viewing angle and color shifts at bias voltage 2.4 V are better than those of bias voltage 1 V.