• 태양에너지
• /
• 제18권1호
• /
• pp.57-67
• /
• 1998

쾌적한 실내환경을 유지하고, 공기조화 설비에 있어서 냉방동안 에너지를 절약하기 위한 실내로 유입되는 냉기의 열유동 특성에 관한 연구이다. 실물 크기의 모형room에 대하여 실내로 유입하는 냉기의 유속(1, 2, 3m/s)과 실내온도와 유입냉기와의 기준온도차(10, 20, $30^{\circ}C$)를 변화시키고, 또한 유입구 형상을 아네모스형과 베인형으로 하면서 실내의 온도분포를 파악하여 열유동 특성 및 혼합특성에 대하여 고찰하였다. 연구 결과, 아네모스형이 베인형보다 혼합이 빨리 진행되었고 유입속도에 의한 영향이 기준 온도차에 의한 영향보다 지배적이었다.

• Wind and Structures
• /
• 제6권2호
• /
• pp.165-177
• /
• 2003

• 신재생에너지
• /
• 제6권2호
• /
• pp.12-18
• /
• 2010

This paper reviews commercial wind mapping services provided by the oversea consulting companies, AL-PRO and anemos in Germany, AWS Truepower and 3TIER in USA. They provide quick-to-use but essential dataset for a preliminary assessment before commencing an actual feasibility study for wind farm development. Details of wind mapping method, mapresolution, data extraction height, price and so forth are compared and fresh service contents such as site analysis report are drawn from the comparison. Despite its public service, the objective value of the Renewable Energy Resource Map System of Korea Instistute of Energy Research is also confirmed and it is anticipated that the drawn new content idea will be ported to the system to enrich its applicability.

• Wind and Structures
• /
• 제9권3호
• /
• pp.179-191
• /
• 2006

Parent wind data are often acknowledged to fit a Weibull probability distribution, implying that wind epoch maxima should fall into the domain of attraction of the Gumbel (Type I) extreme value distribution. However, observations of wind epoch maxima are not fitted well by this distribution and a Generalised Extreme Value (GEV) analysis leading to a Type III fit empirically appears to be better. Thus there is an apparent paradox. The reasons why advocates of the GEV approach seem to prefer it are briefly summarised. This paper gives a detailed analysis of the errors involved when the GEV is fitted to epoch maxima of Weibull origin. It is shown that the results in terms of the shape parameter are an artefact of these errors. The errors are unavoidable with the present sample sizes. If proper significance tests are applied, then the null hypothesis of a Type I fit, as predicted by theory, will almost always be retained. The GEV leads to an unacceptable ambiguity in defining design loads. For these reasons, it is concluded that the GEV approach does not seem to be a sensible option.

• Wind and Structures
• /
• 제10권6호
• /
• pp.495-510
• /
• 2007

Wind pressure data have been collected on the tiled roof of a full-scale test house at Silsoe in the UK. The tiled roof was of conventional UK construction with a batten-space and bitumen-felt underlay beneath the interlocking concrete tiles. Pressures were monitored on the outer surface of selected tiles, at several locations within the batten-space, and beneath the underlay. Data were collected both with and without ventilator tiles installed on the roof. Little information appears to exist on the share of wind load between tiles and underlays which creates uncertainty in the design of both components. The present study has found that for the critical design case of maximum uplifts it would be appropriate to assign 85% of the net roof load to the tiles and 15% to the underlay when an internal pressure coefficient of -0.3 is used, and to assign 60% to the tiles and 50% to the underlay when an internal pressure coefficient of +0.2 is assumed (an element of design conservatism is inherent in the apparent 110% net loading indicated by the latter pair of percentage values). These findings indicate that compared with loads implied by BS 6399-2, UK design loads for underlay are currently conservative by 25% whilst tile loads are unconservative by around 20% in ridge and general regions and by around 45% in edge regions on average over roof slopes of $15^{\circ}-60^{\circ}$.

• 태양에너지
• /
• 제17권2호
• /
• pp.13-22
• /
• 1997

본 연구에서는 실내로 유입되는 온기와 실내공기사이의 온도차 및 유입속도에 따라 발생되는 부력의 영향 및 실내로 유입된 온기의 혼합특성에 관한 열유동특성을 파악하였다. 혼합도의 정의로부터 임계속도($1.2{\sim}1.6m/s$)전 후로 기하학적영향에 대하여서 혼합과의 관계를 파악할 수 있었다. 그리고 축열표율과의 관계는 속도가 크고 기준온도차가 작을수록 부력의 영향을 적게 받아서 아네모스형, 베인형 모두 높은 축열효율을 나타냈다. 그리고 속도가 클 때는 베인형이 전반적으로 우수한 축열효율을 나타냈다. 따라서 유입속도에 의한 영향이 기준온도차에 의한 영향보다 지배적임을 알 수 있었다.